Overpower
This combination delivers exceptional performance with an average of 148 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 91 | 110 | 118 | 189 |
| 1440p QHD | 107 | 129 | 139 | 223 |
| 1080p Full HD | 120 | 145 | 156 | 244 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 5 8400F + NVIDIA GeForce RTX 4070 Ti SUPER, In-Depth Analysis
The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 4070 Ti SUPER combination delivers a compelling 4K-capable experience in Overpower, with the data showing a clear progression of frame rates that scales predictably with both resolution and graphical fidelity. This analysis breaks down the measured performance, contextualizes it against other tested hardware combinations, and provides actionable settings guidance based strictly on the observed results.
Resolution Scaling
The measured frame rates reveal how Overpower responds to pixel count changes, with the GPU consistently emerging as the primary performance arbiter. At 1080p with Low settings, the combo achieves 244 FPS, which drops to 223 FPS at 1440p, and further to 189 FPS at 4K. This represents a 22.5% reduction from 1080p to 1440p, followed by a 15.2% reduction from 1440p to 4K, showing that the performance penalty per pixel is not linear and that the GPU maintains strong scaling even at high resolutions.
Under High settings, the scaling pattern shifts slightly. The average frame rate at 1080p is 145 FPS, which decreases to 129 FPS at 1440p (an 11% drop) and then to 110 FPS at 4K (a 14.7% drop from 1440p). The relatively smaller drop between 1080p and 1440p under High settings suggests that the CPU is still providing enough headroom at lower resolutions, while the 4K figure indicates the GPU is beginning to saturate its available bandwidth.
The Ultra preset shows the most aggressive scaling behavior. Starting at 120 FPS in 1080p, the frame rate falls to 107 FPS at 1440p (a 10.8% reduction) and then to 91 FPS at 4K (a 15% reduction from 1440p). These percentages confirm that Overpower becomes increasingly GPU-bound as resolution rises, with the 4K Ultra result representing the most demanding configuration tested.
Medium settings offer the only complete dataset with minimum and maximum frame rates. At 4K, the combo delivers an average of 118 FPS with a minimum of 101 FPS and a maximum of 136 FPS. This narrow band between minimum and average suggests consistent frame pacing, while the 1440p Medium result shows 139 FPS average with a 118 FPS minimum and 160 FPS maximum. The 1080p Medium configuration reaches 156 FPS average with a 133 FPS minimum and 180 FPS maximum. The spread between minimum and maximum grows from 35 FPS at 4K to 42 FPS at 1440p and 47 FPS at 1080p, indicating that lower resolutions expose more frame-time variance.
GPU Role
The NVIDIA GeForce RTX 4070 Ti SUPER is the dominant contributor to these results, equipped with 16 GB of GDDR6X memory on a 256-bit bus, delivering 672.3 GB/s of bandwidth. The GPU’s boost clock of 2610 MHz, built on the Ada Lovelace architecture with 8448 shading units, provides the raw compute necessary to sustain high frame rates across all tested configurations. Its 44.10 TFLOPS FP32 performance and 66 RT cores position it as a capable part for this action title.
The VRAM capacity of 16 GB appears sufficient for Overpower at all tested resolutions and settings, as the data shows no anomalous performance cliffs that would indicate memory capacity limitations. The minimum frame rate data at Medium settings — 101 FPS at 4K, 118 FPS at 1440p, and 133 FPS at 1080p — supports the conclusion that the GPU maintains stable output even under sustained load.
The GPU’s benchmark percentile of 76 versus all GPUs places it in the upper quartile, with an average benchmark score of 31087. Its nearest rivals in the benchmark database include the NVIDIA Quadro M5000 (score 31206, delta -0.4%), the NVIDIA GRID M60-1Q (score 31220, delta -0.4%), the NVIDIA RTX PRO 4500 Blackwell (score 31532, delta -1.4%), and the NVIDIA TITAN RTX (score 31676, delta -1.9%). These comparisons show the 4070 Ti SUPER performing slightly below these workstation-oriented cards in synthetic benchmarks, but the Overpower measured data demonstrates its real-world gaming strength.
How This Combo Ranks
Within the benchmark database’s tested combinations, this pairing of the AMD Ryzen 5 8400F with the NVIDIA GeForce RTX 4070 Ti SUPER achieves a combo rank of 413 out of 3713 total combinations in Overpower. This places the configuration in the top 11.1% of all tested combos, indicating that it outperforms the vast majority of alternative CPU-GPU pairings in this specific game.
The CPU’s individual benchmark percentile of 77 versus all CPUs, combined with the GPU’s percentile of 76, suggests a balanced pairing where neither component dramatically bottlenecks the other. The CPU’s average benchmark score of 25005 places it within 0.2% of the AMD Ryzen 5 7500F (score 24964), 0.3% of the Intel Core i7-11850H (score 24935), and 0.4% of the Intel Core i7-13620H (score 24911), while trailing the AMD EPYC 9474F by 0.4% (score 25103). These tight margins indicate that the 8400F’s processing power is well-matched to the 4070 Ti SUPER’s graphical capabilities for this title.
The rank of 413 out of 3713 combos is notable because it shows that the combination’s in-game performance exceeds what the sum of its parts might suggest from synthetic benchmarks alone. The GPU’s -1.9% delta versus the TITAN RTX in synthetic tests does not translate to a similar deficit in Overpower’s measured frame rates, reinforcing that real-world gaming performance can diverge from theoretical compute metrics.
FAQ
*Q: What is the highest average frame rate this combo achieves in Overpower?*
A: The highest measured average frame rate is 244 FPS, achieved at 1920x1080 resolution with Low settings.
Q: How much performance is lost when moving from 1080p to 4K at High settings?
A: At High settings, the average frame rate drops from 145 FPS at 1080p to 110 FPS at 4K, representing a 24.1% reduction in average FPS.
Q: Is the CPU or GPU more likely to limit performance at 4K Ultra?
A: The data shows a 91 FPS average at 4K Ultra, with the scaling pattern from lower resolutions indicating the GPU becomes the limiting component as resolution increases, due to the consistent frame rate reductions aligning with pixel count increases.
Q: Does this combo maintain playable frame rates at 4K across all settings?
A: Yes, all tested 4K configurations exceed 90 FPS average, with the lowest being 91 FPS at Ultra settings and the highest being 189 FPS at Low settings.
*Q: How does this combo compare to other tested combinations in Overpower?*
A: It ranks 413th out of 3713 tested combos, placing it in the top 11.1% of all CPU-GPU pairings tested in this game.
Q: What is the frame time consistency at 4K Medium settings?
A: At 4K Medium, the combo delivers an average of 118 FPS with a minimum of 101 FPS and a maximum of 136 FPS, showing a 35 FPS spread between minimum and maximum.
Settings Recommendations
Based on the measured frame rates, the optimal balance between visual quality and performance depends on the target resolution. For 4K displays, the High preset at 110 FPS average provides a smooth experience that is 20.9% faster than Ultra’s 91 FPS, while offering significant graphical improvements over Medium’s 118 FPS at a cost of only 6.8% performance. The Medium preset is also viable at 4K, with its 118 FPS average and 101 FPS minimum ensuring consistent frame delivery, but High delivers a better visual-to-performance ratio for most users.
At 1440p, the High preset at 129 FPS is the recommended choice, as it sits comfortably above the 107 FPS Ultra result and below the 139 FPS Medium, allowing users to prioritize visual fidelity without sacrificing responsiveness. The 1440p Medium configuration, with its 118 FPS minimum, offers near-identical performance to 4K High, making it a strong alternative for those who prefer higher native resolution over graphical settings.
For 1080p users, the Ultra preset at 120 FPS is fully playable and provides the highest visual quality, while the High preset at 145 FPS offers additional headroom for competitive play. The Low preset at 244 FPS is only recommended for esports-style play where maximum frame rate is prioritized over visual quality, as the difference between Low and Medium at 1080p is 88 FPS, but Medium’s 156 FPS is already well above any typical refresh rate threshold.
The data indicates that the Medium preset provides the most consistent frame delivery across all resolutions, with measured minimum frame rates that are within 14.4% of the average at 4K, 15.1% at 1440p, and 14.7% at 1080p. This consistency makes Medium a reliable fallback option for users who prioritize stable frame pacing over peak performance.
CPU Role
The AMD Ryzen 5 8400F, with its 6 cores and 12 threads, operates at a base clock of 4.20 GHz and a boost clock of 4.70 GHz, built on the Zen 4 architecture using the Phoenix codename. Its 16 MB of shared L3 cache and 1 MB L2 cache per core provide sufficient data locality for Overpower’s action-oriented workloads, while the 4 nm process node from TSMC contributes to efficient power delivery with a 65 W TDP.
The CPU’s single-threaded performance, as indicated by its 3dmark single-thread score of 951 and Cinebench R23 single-core score of 2943, is adequate to feed the RTX 4070 Ti SUPER at lower resolutions where the GPU is less saturated. The multithreaded capabilities, shown in the Cinebench R23 multicore score of 20851 and Passmark multithread score of 24389, ensure that the CPU does not become a limiting factor in scenes that may utilize multiple threads.
The CPU’s memory bandwidth of 83.2 GB/s through dual-channel DDR5 support allows for efficient data transfer to the GPU, which is essential for maintaining high frame rates. The PCIe Gen 4 interface with 20 lanes provides sufficient bandwidth for the GPU’s PCIe 4.0 x16 connection, ensuring no data transfer bottlenecks. The 3dmark 16-thread score of 6091, compared to the 2-thread score of 1874, shows that scaling from 2 to 16 threads yields a 3.2x improvement, indicating good multi-thread efficiency for a 6-core part.
Measured FPS Breakdown
At 1920x1080, the combo delivers an average of 244 FPS on Low, 156 FPS on Medium, 145 FPS on High, and 120 FPS on Ultra. The Medium setting shows a minimum of 133 FPS and a maximum of 180 FPS, creating a 47 FPS spread. The progression from Low to Ultra shows a 50.8% reduction in average frame rate, from 244 to 120 FPS, with the largest single-step drop occurring between Low and Medium at 36.1%.
At 2560x1440, the average FPS figures are 223 on Low, 139 on Medium, 129 on High, and 107 on Ultra. The Medium setting reports a minimum of 118 FPS and a maximum of 160 FPS, with a 42 FPS spread. The reduction from Low to Ultra at 1440p is 52.0%, slightly larger than at 1080p, indicating that the GPU’s workload increases proportionally with pixel count.
At 3840x2160, the average FPS values are 189 on Low, 118 on Medium, 110 on High, and 91 on Ultra. The Medium setting shows a minimum of 101 FPS and a maximum of 136 FPS, with a 35 FPS spread. The total reduction from Low to Ultra at 4K is 51.9%, similar to 1440p, but the absolute frame rates are significantly lower due to the 2.25x increase in pixel count from 1440p to 4K.
Comparing across resolutions at the same settings, the data shows that Low settings experience the largest relative drop from 1080p to 4K at 22.5%, while High settings see a 24.1% reduction, Medium settings a 24.4% reduction, and Ultra settings a 24.2% reduction. This consistency across presets confirms that resolution scaling in Overpower is uniform regardless of graphical fidelity, with the GPU’s 672.3 GB/s memory bandwidth and 44.10 TFLOPS compute serving as the primary constraints at all tested configurations.
Hardware Specifications
AMD Ryzen 5 8400F
NVIDIA GeForce RTX 4070 Ti SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 8400F + NVIDIA GeForce RTX 4070 Ti SUPER in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 189.0 |
| 3840x2160 | Medium | 118.0 |
| 3840x2160 | High | 110.0 |
| 3840x2160 | Ultra | 91.0 |
| 2560x1440 | Low | 223.0 |
| 2560x1440 | Medium | 139.0 |
| 2560x1440 | High | 129.0 |
| 2560x1440 | Ultra | 107.0 |
| 1920x1080 | Low | 244.0 |
| 1920x1080 | Medium | 156.0 |
| 1920x1080 | High | 145.0 |
| 1920x1080 | Ultra | 120.0 |
Overpower with Ryzen 5 8400F + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RTX 4070 Ti SUPER + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 5 8400F + RTX 4070 Ti SUPER
Explore FPS benchmarks for other games using this same hardware combination.