Overpower
This combination delivers exceptional performance with an average of 148 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 93 | 110 | 121 | 190 |
| 1440p QHD | 108 | 126 | 137 | 223 |
| 1080p Full HD | 120 | 144 | 156 | 248 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 5 7500F + NVIDIA GeForce RTX 4070 Ti SUPER, In-Depth Analysis
The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4070 Ti SUPER combination lands at rank 166 out of 1744 tested combos in Overpower, placing it in the top 9.5% of all configurations analyzed. This is a strong showing for a pairing that sits well above the median, though the gap between this combo and the very top of the leaderboard suggests there is headroom that other processors or graphics cards exploit. The rank reflects the balance between the six-core Zen 4 CPU and the Ada Lovelace GPU, and the data indicates this is a system that will not be the bottleneck in most gaming scenarios. The percentile standings of the individual components reinforce this: the CPU sits at the 82nd percentile among all processors, while the GPU ranks at the 86th percentile among all graphics cards. When both components are near the top of their respective distributions, the combined result being inside the top tenth of all combos is consistent with expectations, though the exact position at 166 suggests that the pairing is not perfectly optimized for this specific title.
How This Combo Ranks
The combo rank of 166 out of 1744 represents the 90.5th percentile of tested configurations in Overpower, which is a decisive placement in the upper echelon. To contextualize this, consider that the CPU’s nearest rivals include the Intel Core i7-11850H with a deltaPct of 0.1, meaning the Ryzen 5 7500F is essentially tied with that mobile chip in average benchmark score. The AMD Ryzen 9 6900HX trails by 0.4, while the Ryzen 7 2700X and Ryzen 5 8400F are within 0.3. This cluster of processors all perform within a single percentage point of each other, so the CPU itself is not providing a significant edge over its immediate competitors. The GPU side shows a similar pattern: the RTX 4070 Ti SUPER is 0.7% behind the NVIDIA CMP 50HX, 1.6% ahead of the RTX A2000, and 2% ahead of the RTX A1000 Mobile, while the Intel Arc A550M is 2.1% ahead. These small deltas mean the GPU is competitive but not dominant against its nearest rivals. The fact that this combo still achieves rank 166 suggests that Overpower responds well to the specific combination of the 7500F’s single-thread performance and the 4070 Ti SUPER’s raw throughput, rather than to any one component being exceptional.
GPU Role
The NVIDIA GeForce RTX 4070 Ti SUPER brings 16 GB of GDDR6X memory on a 256-bit bus, delivering 672.3 GB/s of bandwidth. This memory configuration is substantial for Overpower, which at 4K Ultra settings still manages an average of 92.5 FPS, indicating that the frame buffer and bandwidth are sufficient for the game’s demands at the highest resolution. The GPU’s boost clock of 2610 MHz, paired with a base clock of 2340 MHz, allows the 8448 shading units to sustain high throughput, and the measured results confirm this. The data shows a clear scaling pattern tied to settings rather than resolution, which points to the GPU being the primary driver of performance in this title. For instance, at 1080p, moving from Low to Ultra drops the average from 247.8 FPS to 119.6 FPS, a reduction of 51.7%. The same settings change at 4K moves from 190.4 FPS to 92.5 FPS, a 51.4% drop. This consistency across resolutions indicates that the GPU is the limiting factor when settings are increased, and the 16 GB VRAM ensures that capacity is never a constraint, even at 4K with Ultra details.
FAQ
Q: How does this combo rank against all other tested configurations in Overpower?
A: The combo ranks 166th out of 1744 tested combos, placing it in the top 9.5% of all systems.
Q: What is the difference in average FPS between 1080p Low and 4K Ultra?
A: At 1080p Low, the average is 247.8 FPS, while at 4K Ultra it drops to 92.5 FPS, a reduction of 62.7% from the lowest stress scenario to the highest.
Q: Is the CPU or GPU more likely to be the bottleneck at 4K?
A: The data suggests the GPU is the limiter at 4K, as the average FPS at 4K Ultra is 92.5, which is 22.7% lower than the 119.6 FPS at 1080p Ultra, showing a clear resolution-dependent scaling.
Q: How does the RTX 4070 Ti SUPER compare to its nearest rival in average benchmark score?
A: The RTX 4070 Ti SUPER has an average benchmark score of 48704, which is 0.7% lower than the NVIDIA CMP 50HX’s score of 49071.
Q: What is the CPU’s boost clock and how does it relate to performance?
A: The Ryzen 5 7500F has a boost clock of 5.00 GHz, and its single-thread benchmark score of 974 in 3DMark indicates strong per-core performance, which helps maintain high FPS at lower resolutions.
Q: What is the memory bandwidth of the GPU and why does it matter?
A: The GPU has 672.3 GB/s of bandwidth from its 16 GB GDDR6X memory on a 256-bit bus, which is sufficient to avoid bandwidth bottlenecks even at 4K High settings where the average FPS is 110.3.
Measured FPS Breakdown
The measured FPS data for Overpower reveals a consistent pattern across all three resolutions. At 1080p, the Low preset delivers an average of 247.8 FPS, which drops to 155.6 FPS at Medium, 143.5 FPS at High, and 119.6 FPS at Ultra. The transition from Low to Medium is the largest single step, a 37.2% reduction, while the step from High to Ultra is the smallest at 16.6%. At 1440p, the averages are 222.8 FPS for Low, 137.2 FPS for Medium, 126.3 FPS for High, and 107.9 FPS for Ultra. The drop from Low to Medium here is 38.4%, and from High to Ultra is 14.6%. At 4K, the results are 190.4 FPS for Low, 120.8 FPS for Medium, 110.3 FPS for High, and 92.5 FPS for Ultra. The Low to Medium reduction is 36.6%, and the High to Ultra reduction is 16.1%. These numbers indicate that the Medium preset offers the most significant performance hit relative to Low, while the difference between High and Ultra is comparatively smaller, suggesting diminishing returns on settings beyond High.
Settings Recommendations
Based on the measured FPS rows, the Medium preset appears to offer the best balance between visual fidelity and performance, though the interpretation depends on the target refresh rate. At 1080p Medium, the average of 155.6 FPS is sufficient for high-refresh-rate displays, while the jump to High only brings 143.5 FPS, a modest 8.4% improvement in settings quality for a 7.8% drop in FPS. At 1440p, Medium delivers 137.2 FPS, which is still comfortably above 120 FPS for smooth gameplay, whereas High drops to 126.3 FPS. At 4K, Medium provides 120.8 FPS, which is the only preset besides Low that stays above the 100 FPS threshold at that resolution. The Ultra preset at 4K yields 92.5 FPS, which is playable but may not maximize the potential of a high-refresh-rate 4K panel. For users prioritizing frame rate, Low at 1440p gives 222.8 FPS, but the visual quality reduction is substantial. The data suggests that High is the sweet spot at 1080p and 1440p, with 143.5 FPS and 126.3 FPS respectively, while Medium is the optimal choice at 4K to maintain a triple-digit average.
CPU Role
The AMD Ryzen 5 7500F is a six-core, twelve-thread processor based on Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. Its single-thread performance is notable, with a 3DMark single-thread score of 974 and a Cinebench R23 single-core score of 3218. This strong per-core performance is critical for Overpower, which appears to scale well with single-thread throughput given the FPS differences across resolutions. The CPU’s L3 cache of 32 MB shared across all cores helps maintain data locality, and its 83.2 GB/s memory bandwidth on a dual-channel DDR5 interface ensures the GPU is fed with data. The CPU’s average benchmark score of 24993 places it at the 82nd percentile, and its nearest rival, the Intel Core i7-11850H, has a score of 24974 with a deltaPct of 0.1, meaning the 7500F is effectively tied with that chip. In Overpower, the CPU’s role becomes more apparent at lower resolutions: at 1080p Low, the average FPS of 247.8 is likely approaching the CPU’s limit, as the GPU is less stressed at that setting. The fact that the 4K Low result is 190.4 FPS, a 23.2% drop from 1080p Low, indicates that even at Low settings, the GPU still has headroom and the CPU is not the sole bottleneck, but the single-thread capabilities of the 7500F are sufficient to avoid holding back the RTX 4070 Ti SUPER in this title.
Resolution Scaling
The FPS scaling from 1080p to 4K reveals the nature of the bottleneck in Overpower. At Low settings, the average FPS drops from 247.8 at 1080p to 222.8 at 1440p (a 10.1% reduction) and then to 190.4 at 4K (a 23.2% reduction from 1080p). This relatively shallow decline at Low settings indicates that the CPU is still a significant factor at 1080p, but as resolution increases, the GPU begins to take over the limiting role. At Ultra settings, the drop is more pronounced: from 119.6 at 1080p to 107.9 at 1440p (a 9.8% reduction) and then to 92.5 at 4K (a 22.7% reduction from 1080p). The similarity in the percentage drops between Low and Ultra settings across resolutions is striking, suggesting that the GPU is the primary limiter even at 1080p Ultra, since the CPU is capable of maintaining high FPS. The gap between 1440p and 4K is consistently around 12-14% for all settings, which aligns with the pixel count increase from 3.7 million to 8.3 million (a 2.25x increase) but with FPS only dropping by roughly a third of that factor, indicating that the GPU has enough bandwidth and processing power to handle the resolution increase without a proportional performance loss. This scaling behavior points to a balanced system where neither component is severely underutilized, though the GPU becomes the clear limiting factor at 4K Ultra where the 92.5 FPS average is the lowest measured result.
Hardware Specifications
AMD Ryzen 5 7500F
NVIDIA GeForce RTX 4070 Ti SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500F + NVIDIA GeForce RTX 4070 Ti SUPER in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 190.4 |
| 3840x2160 | Medium | 120.8 |
| 3840x2160 | High | 110.3 |
| 3840x2160 | Ultra | 92.5 |
| 2560x1440 | Low | 222.8 |
| 2560x1440 | Medium | 137.2 |
| 2560x1440 | High | 126.3 |
| 2560x1440 | Ultra | 107.9 |
| 1920x1080 | Low | 247.8 |
| 1920x1080 | Medium | 155.6 |
| 1920x1080 | High | 143.5 |
| 1920x1080 | Ultra | 119.6 |
Overpower with Ryzen 5 7500F + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RTX 4070 Ti SUPER + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 5 7500F + RTX 4070 Ti SUPER
Explore FPS benchmarks for other games using this same hardware combination.