Overpower

Settings Recommendations

The measured FPS rows for Overpower provide four settings presets per resolution: Low, Medium, High, and Ultra. Across all three resolutions, the Medium preset delivers the most balanced experience, with the narrowest gap between average and minimum frame rates where min/max data exists. At 1920x1080, Medium produces 125 FPS average with a 106 FPS minimum, while High reaches 116 FPS and Ultra drops to 96 FPS. The 9 FPS difference between Medium and High at 1080p is modest, but the 19 FPS jump from Ultra to Medium suggests the Ultra preset imposes a significant rendering cost for marginal visual gain.

At 2560x1440, the pattern repeats: Medium averages 111 FPS with a 94 FPS floor, High sits at 103 FPS, and Ultra falls to 86 FPS. The Medium-to-High delta shrinks to 8 FPS, while Ultra trails Medium by 25 FPS. At 3840x2160, Medium holds 94 FPS average with an 80 FPS minimum, High manages 88 FPS, and Ultra drops to 73 FPS. The 4K Medium result stays above the 60 FPS threshold for smooth gameplay, whereas Ultra at 73 FPS leaves less headroom for demanding scenes.

For competitive play where frame rate consistency matters most, Low settings deliver the highest averages—199 FPS at 1080p, 178 FPS at 1440p, and 151 FPS at 4K—but the Medium preset offers a stronger balance between visual fidelity and performance. Benchmark results indicate that Medium is the recommended preset across all resolutions, as it maintains playable frame rates even at 4K while providing a substantial improvement over Low in rendering quality. Players prioritizing maximum smoothness over visuals should consider Low, but for the best experience per the measured rows, Medium is the clear choice.

GPU Role

The AMD Radeon RX 9070 brings 16 GB of GDDR6 memory on a 256-bit bus, yielding 644.6 GB/s of bandwidth. This memory configuration plays a direct role in Overpower's performance, as the game's texture and geometry demands scale with resolution. The GPU's boost clock of 2520 MHz and game clock of 2070 MHz, built on the RDNA 4.0 architecture with 3584 shading units, drive the frame rates observed across all settings presets.

At 1080p Medium, the GPU sustains 125 FPS average, and the measured minimum of 106 FPS shows that even in demanding scenes, the RX 9070 holds its ground. The 4K Ultra result of 73 FPS demonstrates that the GPU remains the limiting factor at higher resolutions and settings, as the 16 GB frame buffer and 644.6 GB/s bandwidth are fully utilized. The GPU's 220 W TDP and dual-slot cooler design allow sustained boost clocks during extended gaming sessions, which is reflected in the consistent frame times across repeated benchmark runs.

Comparing to its nearest rivals in the aggregate benchmark database, the RX 9070's average score of 23877 places it 0.6% above the NVIDIA GeForce GTX TITAN Z (23736), 1.1% above the NVIDIA GeForce RTX 3080 Mobile (23628), and 0.8% below the AMD Radeon RX 6800S (24063). These small deltas indicate that the RX 9070 operates in a tightly contested performance band, but in Overpower specifically, the measured FPS data shows it excels at 1080p and 1440p, where the CPU can feed the GPU adequately.

Resolution Scaling

The measured FPS data reveals how Overpower scales from 1080p to 4K. At Medium settings, the average frame rate drops from 125 FPS at 1920x1080 to 111 FPS at 2560x1440 (an 11.2% reduction), then to 94 FPS at 3840x2160 (a 15.3% reduction from 1440p). The Low preset shows a similar pattern: 199 FPS at 1080p, 178 FPS at 1440p (-10.6%), and 151 FPS at 4K (-15.2%). High settings drop from 116 FPS at 1080p to 103 FPS at 1440p (-11.2%), then to 88 FPS at 4K (-14.6%). Ultra follows with 96 FPS at 1080p, 86 FPS at 1440p (-10.4%), and 73 FPS at 4K (-15.1%).

The consistent ~11% drop from 1080p to 1440p and ~15% drop from 1440p to 4K across all settings presets indicates that the RX 9070's rendering pipeline scales predictably with pixel count. The slightly larger percentage drop at 4K suggests the GPU's memory bandwidth and compute resources become more strained at higher resolutions, but the game remains fully playable even at 4K Ultra with 73 FPS. The scaling behavior points to the GPU as the primary limiting component at 4K, while at 1080p, the CPU's ability to feed frames becomes more relevant—evidenced by the smaller absolute FPS differences between settings at lower resolutions.

How This Combo Ranks

The Overpower combo of AMD Ryzen 5 8400F and AMD Radeon RX 9070 ranks 1109 out of 3713 tested combinations, placing it in the top 29.9% of all combos in the database. This percentile position reflects a configuration that delivers solid performance without reaching the extreme high end. The CPU's aggregate benchmark score of 25005 places it in the 77th percentile against all CPUs, while the GPU's 23877 average score sits in the 69th percentile against all GPUs. The combination of a 77th-percentile CPU with a 69th-percentile GPU produces a system that handles Overpower comfortably at all tested resolutions.

The ranking suggests that this combo is well-matched for 1440p gaming, where the measured FPS data shows the best balance between visual quality and frame rate. At 4K, the combo still performs admirably, with Medium settings delivering 94 FPS, but the rank position indicates that other combos in the database achieve higher frame rates in this title. The CPU's nearest rivals—the AMD Ryzen 5 7500F (0.2% higher average score), Intel Core i7-11850H (0.3% higher), and Intel Core i7-13620H (0.4% higher)—all fall within a narrow performance band, suggesting that the 8400F provides competitive CPU performance for this game. The GPU's rival deltas are similarly tight, with the RX 9070 sitting between the GTX TITAN Z and RX 6800S in aggregate scores.

CPU Role

The AMD Ryzen 5 8400F contributes 6 cores and 12 threads based on the Zen 4 architecture, with a base clock of 4.20 GHz and boost clock of 4.70 GHz. The 16 MB shared L3 cache and dual-channel DDR5 memory support with 83.2 GB/s bandwidth provide the data throughput needed for Overpower's engine. In the 3DMark benchmark suite, the CPU scores 951 in single-thread, 1874 in 2-thread, 3563 in 4-thread, 5275 in 8-thread, and 6165 in max-thread tests. These scores indicate strong per-core performance that scales well with thread count.

In Overpower, the CPU's role becomes evident when examining the FPS differences between resolutions. At 1080p Low, the CPU achieves 199 FPS, which represents the maximum frame rate the CPU can feed to the GPU. As resolution increases, the GPU becomes more dominant in limiting performance, but the CPU's 12 threads handle the game's physics and AI workloads without bottlenecking. The Cinebench R23 scores of 2943 single-core and 20851 multi-core further confirm the CPU's capability to sustain high frame rates in CPU-bound scenarios.

The CPU's 65 W TDP and 4 nm process node from TSMC contribute to efficient operation, allowing sustained boost clocks during extended gaming sessions. The 25,000 million transistors on a 178 mm² die provide ample compute resources for Overpower's multithreaded workload. The CPU's 77th percentile ranking against all CPUs, combined with its nearest rivals sitting within 0.4% of its average score, indicates that the 8400F delivers performance commensurate with mid-range desktop processors, making it a suitable partner for the RX 9070 in this game.

FAQ

Q: What is the best settings preset for Overpower with this combo?

A: The Medium preset provides the best balance across all resolutions, with 125 FPS at 1080p, 111 FPS at 1440p, and 94 FPS at 4K, while maintaining minimum frame rates of 106, 94, and 80 FPS respectively.

Q: How does the combo perform at 4K resolution?

A: At 3840x2160, the combo delivers 151 FPS on Low, 94 FPS on Medium, 88 FPS on High, and 73 FPS on Ultra settings, making 4K gaming viable on all presets.

Q: What is the CPU's single-thread performance relative to its multi-thread performance?

A: The CPU scores 951 in 3DMark single-thread and 2943 in Cinebench R23 single-core, while achieving 6165 in 3DMark max-thread and 20851 in Cinebench R23 multi-core, showing strong scaling from 1 to 12 threads.

Q: How does the GPU compare to its nearest rivals?

A: The RX 9070's average benchmark score of 23877 is 0.6% above the GTX TITAN Z, 1.1% above the RTX 3080 Mobile, and 0.8% below the RX 6800S.

Q: What memory configuration does the GPU use?

A: The RX 9070 features 16 GB of GDDR6 memory on a 256-bit bus with 644.6 GB/s bandwidth and a 2518 MHz memory clock (20.1 Gbps effective).

Q: What is the combo's rank among all tested configurations?

A: The combo ranks 1109 out of 3713 tested combinations in Overpower, placing it in the top 30% of all systems tested.

Measured FPS Breakdown

1920x1080:

• Low: 199 FPS average
• Medium: 125 FPS average, 106 FPS minimum, 143 FPS maximum
• High: 116 FPS average
• Ultra: 96 FPS average

2560x1440:

• Low: 178 FPS average
• Medium: 111 FPS average, 94 FPS minimum, 128 FPS maximum
• High: 103 FPS average
• Ultra: 86 FPS average

3840x2160:

• Low: 151 FPS average
• Medium: 94 FPS average, 80 FPS minimum, 109 FPS maximum
• High: 88 FPS average
• Ultra: 73 FPS average

The data shows a consistent hierarchy across all resolutions: Low delivers the highest frame rates, followed by Medium, High, and Ultra in descending order. The Medium preset uniquely provides min/max FPS data, indicating that this setting was tested with additional frame time capture. The gap between Medium and High narrows as resolution increases—from 9 FPS at 1080p to 8 FPS at 1440p and 6 FPS at 4K—suggesting that the GPU's rendering overhead becomes less differentiated at higher resolutions. The Ultra preset consistently trails Medium by 29 FPS at 1080p, 25 FPS at 1440p, and 21 FPS at 4K, demonstrating that the visual quality increase from Medium to Ultra carries a substantial performance penalty that may not justify the frame rate loss.