Overpower

Overpower

AVERAGE FPS
119
good

This combination provides smooth gameplay with an average of 119 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 72 87 94 154
1440p QHD 87 103 111 179
1080p Full HD 98 119 126 198

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 154
3840x2160 Medium 94
3840x2160 High 87
3840x2160 Ultra 72
2560x1440 Low 179
2560x1440 Medium 111
2560x1440 High 103
2560x1440 Ultra 87
1920x1080 Low 198
1920x1080 Medium 126
1920x1080 High 119
1920x1080 Ultra 98

Overpower with AMD Ryzen 5 7600 + AMD Radeon RX 9070, In-Depth Analysis

The AMD Ryzen 5 7600 paired with the AMD Radeon RX 9070 delivers a robust 1080p and 1440p experience in Overpower, with 4K remaining highly playable. The data shows a system where the GPU is the primary scaling factor as resolution increases, while the CPU provides ample headroom to keep frame rates high. This combination sits comfortably in the upper third of all tested configurations, making it a practical choice for high-refresh-rate gaming without exotic cooling or power requirements.

Resolution Scaling

The measured FPS data for this combo reveals a clear and predictable pattern of performance degradation as resolution climbs. At 1080p with High settings, the system produces 118.6 FPS. Moving to 1440p High drops that to 102.7 FPS, a reduction of roughly 13%. The jump to 4K High yields 87.2 FPS, which is another 15% drop from the 1440p figure. This scaling curve indicates that the Radeon RX 9070 is the limiting factor at higher resolutions, as the frame rate loss is substantial but not catastrophic.

The gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the spread from Low (198.1 FPS) to Ultra (97.5 FPS) is about 100 FPS. At 1440p, that spread narrows to roughly 92 FPS (178.7 Low vs 86.6 Ultra). At 4K, the spread compresses to 81.9 FPS (154.2 Low vs 72.3 Ultra). This compression suggests that at 4K, the GPU is becoming saturated even at Low settings, and the incremental cost of Ultra settings is relatively smaller in absolute FPS terms. The data points to a system that is GPU-bound at 4K, while at 1080p the CPU still has enough headroom to push very high frame rates, especially on lower settings.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture, built on a 5 nm process at TSMC. Its base clock is 3.80 GHz with a boost clock of 5.10 GHz. This configuration is well-suited for gaming, as evidenced by its benchmark scores. The CPU achieves a single-thread score of 999 in 3dmark and 3246 in Cinebench R23 single-core, which are strong figures for a desktop part. Multi-threaded performance is also solid, with a Cinebench R23 multi-core score of 22992 and a 3dmark max-threads score of 6503.

In Overpower, the CPU's role is most apparent at 1080p with Low settings, where the system reaches 198.1 FPS. This high frame rate suggests that the CPU is not a bottleneck at this resolution and settings level. The Ryzen 5 7600’s 32 MB of shared L3 cache and dual-channel DDR5 memory support (83.2 GB/s bandwidth) provide the necessary throughput for feeding the GPU. Compared to its nearest rivals, the Ryzen 7 5800X3D (0.2% delta) and Intel Core i9-12900HK (-0.2% delta), the 7600 is essentially on par in average benchmark score, indicating that its 6 cores and 12 threads are sufficient for the game's workload. The CPU's 65W TDP also means it runs cool and efficiently, leaving thermal headroom for the GPU.

GPU Role

The AMD Radeon RX 9070 is the clear workhorse in this pairing. Based on the RDNA 4.0 architecture (Navi 48 chip) on a 4 nm process, it features 16 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 644.6 GB/s. Its boost clock is 2520 MHz, with a game clock of 2070 MHz. This memory capacity and bandwidth are critical for 4K gaming, where large textures and high resolutions demand significant VRAM throughput.

The GPU's compute capabilities are substantial, with 3584 shading units and an FP32 performance of 36.13 TFLOPS. In Overpower, the RX 9070's performance is the deciding factor in the frame rate differences between resolutions. At 4K Ultra, the combo delivers 72.3 FPS, which is a demanding workload that still remains playable. The GPU's 128 ROPs and 224 TMUs handle pixel and texture processing efficiently, as shown by the 4K High result of 87.2 FPS. The RX 9070's nearest rivals in benchmark scores include the NVIDIA A2 (-0.2% delta) and the Quadro GV100 (0.3% delta), but those are not gaming-focused cards; the RX 9070's architecture is clearly optimized for real-time rendering. The 16 GB VRAM is a key asset, ensuring that even at 4K Ultra settings, there is no memory capacity bottleneck that could cause stuttering or texture pop-in.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four settings levels. At 1080p, the combo starts at 198.1 FPS on Low, drops to 125.5 FPS on Medium, 118.6 FPS on High, and 97.5 FPS on Ultra. These numbers are all above the 60 FPS threshold, making 1080p a smooth experience at any settings. The jump from Low to Medium is a 36% reduction in frame rate, indicating that Medium settings introduce significant graphical effects that tax the GPU.

At 1440p, the results are 178.7 FPS (Low), 110.5 FPS (Medium), 102.7 FPS (High), and 86.6 FPS (Ultra). The 1440p Ultra result is still above 60 FPS, which is impressive for a high-fidelity setting. The transition from 1080p to 1440p at Ultra costs about 11 FPS (97.5 to 86.6), showing that the GPU scales reasonably well with resolution. At 4K, the results are 154.2 FPS (Low), 93.7 FPS (Medium), 87.2 FPS (High), and 72.3 FPS (Ultra). The 4K Low result of 154.2 FPS is notable, suggesting that even at 4K, the system can achieve high refresh rates if settings are lowered. The 4K Ultra result of 72.3 FPS is the lowest in the dataset but remains playable for most titles, especially if a variable refresh rate monitor is used.

How This Combo Ranks

This specific combination of AMD Ryzen 5 7600 and AMD Radeon RX 9070 ranks 544th out of 1744 tested combos in Overpower. This places it in the 69th percentile of all configurations, meaning it outperforms roughly two-thirds of the tested systems. The rank reflects the balance of the components; the CPU is not holding back the GPU, and the GPU is powerful enough to deliver high frame rates across most settings and resolutions.

The combo's ranking is particularly strong given the CPU's relatively modest core count. The Ryzen 5 7600's performance is nearly identical to the Ryzen 7 5800X3D (0.2% delta) and Intel Core i9-11900K (0.3% delta), showing that for Overpower, a well-clocked 6-core processor is sufficient. The RX 9070's GPU benchmark scores, where it sits at the 79th percentile of all GPUs, reinforce that the graphics card is the dominant contributor to this combo's rank. The data suggests that users looking to improve their ranking in Overpower would benefit more from upgrading the GPU than the CPU, as the 7600 already provides ample processing power for this game's engine.

FAQ

Q: What is the best resolution and settings combination for this setup to maintain a solid 60+ FPS?

A: The data shows that all tested resolutions and settings combinations achieve an average FPS above 60. The lowest recorded average is 72.3 FPS at 4K Ultra, so even the most demanding configuration is playable.

Q: How does the Ryzen 5 7600 compare to its closest rival, the Ryzen 7 5800X3D?

A: The Ryzen 5 7600 has an average benchmark score of 26617, while the Ryzen 7 5800X3D scores 26574. This represents a delta of 0.2%, meaning the 7600 is essentially equal in performance for this game.

*Q: Is the 16 GB VRAM on the RX 9070 sufficient for 4K gaming in Overpower?*

A: Yes, the measured results at 4K Ultra show an average of 72.3 FPS, indicating that the 16 GB of GDDR6 memory is not a limiting factor. The memory bandwidth of 644.6 GB/s supports high-resolution textures.

Q: What is the CPU's single-thread performance, and why is it important for this game?

A: The Ryzen 5 7600 achieves a 3dmark single-thread score of 999 and a Cinebench R23 single-core score of 3246. Strong single-thread performance is crucial for game logic and physics, which the 1080p Low result of 198.1 FPS confirms is not a bottleneck.

Q: How does this combo's ranking compare to other tested systems?

A: This combo ranks 544th out of 1744 tested combos, placing it in the top 31% of all configurations. This indicates it is a solid mid-to-high-tier performer in Overpower.

*Q: Does the GPU's performance in Overpower match its overall benchmark average?*

A: The RX 9070's average benchmark score is 34780, and it sits at the 79th percentile of all GPUs. The measured FPS results in Overpower are consistent with this high percentile, with 4K Ultra still exceeding 70 FPS.

Hardware Specifications

AMD Ryzen 5 7600

Cores / Threads 6 / 12
Base Clock 3800 MHz
Boost Clock 5100 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 9070

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2520 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7600 + AMD Radeon RX 9070 in Overpower

Resolution Settings Avg FPS
3840x2160 Low 154.2
3840x2160 Medium 93.7
3840x2160 High 87.2
3840x2160 Ultra 72.3
2560x1440 Low 178.7
2560x1440 Medium 110.5
2560x1440 High 102.7
2560x1440 Ultra 86.6
1920x1080 Low 198.1
1920x1080 Medium 125.5
1920x1080 High 118.6
1920x1080 Ultra 97.5

Overpower with Ryzen 5 7600 + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with RX 9070 + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with Ryzen 5 7600 + RX 9070

Explore FPS benchmarks for other games using this same hardware combination.