Overpower

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 4090 delivers exceptional frame rates in Overpower, consistently exceeding 100 FPS at every tested resolution and preset. The data shows a system that is overwhelmingly GPU-limited at higher resolutions, while the CPU demonstrates ample headroom to feed the flagship graphics card even at 1080p. This combination ranks 36th out of 1744 tested combos, placing it in the top 2.1% of all configurations.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance degradation as resolution increases, with the magnitude of the drop varying significantly by preset. At High settings, the average frame rate falls from 174.6 FPS at 1080p to 154.1 FPS at 1440p, a reduction of 11.7%, and then to 129.9 FPS at 4K, representing a further 15.7% decline from 1440p. This translates to a total drop of 25.6% from 1080p to 4K at High settings, indicating that the GPU is the primary bottleneck as pixel count grows.

The scaling behavior is more pronounced at lower settings, where the CPU has more relative influence. At Low settings, the system achieves 253 FPS at 1080p, drops to 243.3 FPS at 1440p (a 3.8% decline), and then falls to 229.6 FPS at 4K (a 5.6% decline from 1440p). The total reduction from 1080p to 4K at Low settings is only 9.2%, which is notably smaller than the 25.6% drop seen at High settings. This suggests that at Low settings, the frame rate is partially constrained by the CPU even at 1080p, as the RTX 4090's raw throughput is not being fully utilized.

At Ultra settings, the scaling is steepest in absolute terms. The system delivers 146.5 FPS at 1080p, 128 FPS at 1440p, and 108.1 FPS at 4K. The percentage drops are 12.6% from 1080p to 1440p and 15.5% from 1440p to 4K, totaling 26.2% across the full range. This pattern confirms that Ultra settings place the heaviest load on the GPU, making resolution scaling the dominant factor. The Medium preset shows intermediate behavior, with frame rates of 187 FPS at 1080p, 169.3 FPS at 1440p, and 143.7 FPS at 4K, representing drops of 9.5% and 15.1% respectively.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, built on a 5 nm process node at TSMC. Its base clock of 3.70 GHz can boost up to 5.00 GHz, and the chip carries 32 MB of shared L3 cache alongside 1 MB of L2 per core. The benchmark results indicate a strong single-threaded performance, with a 3dmark_single_thread score of 974 and a Cinebench R23 single-core score of 3218. Multi-threaded performance is also respectable, with a Cinebench R23 multicore score of 22799 and a Geekbench multicore score of 12686.

In the context of Overpower, the CPU's role becomes evident when comparing frame rates across settings at the same resolution. At 1080p, the difference between Low and Ultra settings is 106.5 FPS (253 vs 146.5), which is a 42.1% reduction. This gap is much larger than the 9.2% resolution scaling drop at Low settings, indicating that the CPU is not the limiting factor at 1080p; the GPU's workload scaling with settings drives the performance change. The CPU's 3dmark_2_threads score of 1902 and 3dmark_4_threads score of 3621 suggest that it can handle the game's thread demands without becoming a bottleneck, as the frame rates remain above 146 FPS even at the most demanding preset.

The processor's 65 W TDP and dual-channel DDR5 memory support with 83.2 GB/s bandwidth provide sufficient headroom for gaming workloads. The boost clock of 5.00 GHz is particularly relevant for Overpower, as the game appears to benefit from high single-thread performance, evidenced by the small FPS drop when moving from 1080p to 1440p at Low settings (only 3.8%). The CPU's percentile ranking of 82 versus all CPUs indicates it sits above average, and its nearest rival, the Intel Core i7-11850H, has an average score 0.1% higher, showing the 7500F is competitive in synthetic benchmarks. However, the data shows that in Overpower, the CPU is rarely the bottleneck, as even at 1080p Low, the system achieves 253 FPS, which is likely near the upper limit of what the game engine can produce.

GPU Role

The NVIDIA GeForce RTX 4090 is the dominant component in this configuration, featuring 24 GB of GDDR6X memory on a 384-bit bus with 1.01 TB/s of bandwidth. The GPU's architecture, Ada Lovelace, is built on a 5 nm process and contains 16,384 shading units, 512 TMUs, and 176 ROPs. Its boost clock of 2520 MHz and base clock of 2235 MHz enable substantial compute throughput, with FP32 performance rated at 82.58 TFLOPS. The 128 RT cores and 512 tensor cores provide dedicated hardware for ray tracing and AI workloads, though the measured FPS data does not isolate these features.

The GPU's role in Overpower is clearly dominant, as evidenced by the resolution scaling patterns. At High settings, the frame rate drops by 25.6% from 1080p to 4K, which is a classic sign of GPU-bound performance. The RTX 4090's 24 GB VRAM capacity is more than sufficient for any preset at 4K, as the game does not appear to be memory-limited based on the consistent frame rates. The GPU's 3dmark_steel_nomad_dx12 score of 9223 and Passmark G3D score of 38194 place it in the 91st percentile of all GPUs, confirming its high-end positioning.

The scaling between settings at 4K illustrates the GPU's workload sensitivity. At 4K, the system delivers 229.6 FPS at Low, 143.7 FPS at Medium, 129.9 FPS at High, and 108.1 FPS at Ultra. The transition from Low to Medium causes a 37.4% drop, while Medium to High causes a 9.6% drop, and High to Ultra causes a 16.8% drop. This non-linear scaling suggests that certain settings have disproportionate GPU cost, with the Low-to-Medium jump being particularly heavy. The GPU's pixel rate of 443.5 GPixel/s and texture rate of 1,290.2 GTexel/s provide ample fill rate for 4K rendering, as even at Ultra 4K the system maintains 108.1 FPS.

Settings Recommendations

Based on the measured FPS rows, the optimal balance between visual quality and performance depends on the target resolution. At 1080p, the Ultra preset delivers 146.5 FPS, which is well above the 60 FPS threshold and provides a smooth experience. The High preset at 1080p offers 174.6 FPS, a 19.2% improvement over Ultra, while Medium provides 187 FPS. Given that all presets at 1080p exceed 146 FPS, users can confidently select Ultra for maximum visual fidelity without sacrificing playability.

At 1440p, the Ultra preset yields 128 FPS, which remains highly playable. The High preset at 154.1 FPS offers a 20.4% uplift over Ultra, and Medium at 169.3 FPS provides an additional 9.9% gain. The data suggests that High is the sweet spot at 1440p, as it delivers a significant frame rate advantage over Ultra while still maintaining high visual quality. The Low preset at 243.3 FPS is only useful for competitive play where maximum frame rates are prioritized over visuals.

At 4K, the Ultra preset drops to 108.1 FPS, which is still above the 100 FPS mark and playable on high refresh rate displays. The High preset at 129.9 FPS offers a 20.2% improvement over Ultra, making it the recommended choice for 4K gaming. Medium at 143.7 FPS provides another 10.6% gain over High, but the visual quality reduction may not justify the difference. The Low preset at 229.6 FPS is excessive for 4K and would be reserved for esports scenarios. Across all resolutions, the High preset appears to offer the best balance, with frame rates ranging from 129.9 FPS at 4K to 174.6 FPS at 1080p.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4090 ranks 36th out of 1744 tested combos in Overpower, placing it in the top 2.1% of all configurations. This high ranking is primarily driven by the GPU's exceptional performance, as the RTX 4090 sits in the 91st percentile of all GPUs with an average benchmark score of 66473. The CPU, while not the top performer, holds the 82nd percentile with an average score of 24993, ensuring it does not bottleneck the GPU.

The CPU's nearest rival, the Intel Core i7-11850H, has an average score 0.1% higher, while the AMD Ryzen 7 2700X is 0.3% lower, indicating the 7500F is well-positioned among its peers. The GPU's nearest rival, the NVIDIA Tesla T4, scores 0.4% lower, while the AMD Radeon Pro Vega 56 scores 0.9% higher, showing the RTX 4090 is competitive but not the absolute top in synthetic benchmarks. However, in Overpower, the combination's rank of 36 out of 1744 demonstrates that the pairing is exceptionally effective, outperforming the vast majority of tested systems. The measured FPS data confirms this, with even the most demanding Ultra 4K preset exceeding 108 FPS. The gap between this combo and the 35 systems ranked above it is likely due to CPUs with higher multi-threaded performance, but the 7500F's strong single-thread score of 974 in 3dmark ensures that the RTX 4090 is fully utilized in this game.