Fivem

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 4090 delivers a benchmark profile in Fivem that is defined by extreme high refresh rate capability at lower resolutions, with a predictable GPU-bound falloff as pixel count increases. The combination ranks 43rd out of 1792 tested combos, placing it in the top 2.4% of all configurations in this multiplayer title. This position reflects a pairing where the CPU has enough single-thread and multi-thread headroom to feed one of the fastest consumer GPUs available, though the data reveals where the balance shifts.

Resolution Scaling

The measured FPS data shows a clear and consistent pattern of performance degradation as resolution increases from 1080p to 4K, with the magnitude of the drop varying significantly by settings preset. At Low settings, the transition from 1920x1080 to 2560x1440 reduces average FPS from 339.2 to 239.6, a drop of 99.6 FPS, and then further to 134.4 at 3840x2160, representing a cumulative reduction of 204.8 FPS from the 1080p baseline. This scaling behavior indicates that at 1080p Low, the system is heavily CPU-limited, as the RTX 4090 is capable of far higher frame rates than the processor can deliver, and the GPU utilization increases as resolution rises.

At Ultra settings, the same resolution progression shows a different pattern: 178 FPS at 1080p, 117.1 at 1440p, and 68.1 at 4K. The absolute drop from 1080p to 4K is 109.9 FPS, which is proportionally similar to the Low preset but starts from a much lower ceiling. The Medium and High presets sit between these extremes, with Medium scaling from 288.4 to 192.5 to 103.6 FPS, and High scaling from 231.9 to 153.3 to 81.6 FPS across the three resolutions. The data suggests that at lower settings, the CPU becomes the limiting component earlier in the resolution ladder, while at higher settings, the GPU workload dominates sooner.

The ratio between 1080p and 4K performance is telling: at Low settings, 4K achieves 39.6% of the 1080p frame rate, while at Ultra settings, 4K achieves 38.3% of the 1080p frame rate. This near-identical ratio across settings indicates that the scaling bottleneck is primarily resolution-driven rather than settings-driven, which points to the GPU's rendering pipeline being the constraining factor at 4K regardless of quality preset.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, built on a 5 nm process by TSMC. Its base clock of 3.70 GHz and boost clock of 5.00 GHz provide the single-thread performance that Fivem's multiplayer workloads often depend on. The CPU's benchmark scores reinforce this: it achieves a 3dmark_single_thread score of 974 and a passmark_single_thread score of 3841, with a cinebench_r23_singlecore score of 3218. These numbers place the processor in the 82nd percentile of all CPUs, with an average benchmark score of 24993.

The CPU's multi-threaded capabilities are also substantial, as shown by a cinebench_r23_multicore score of 22799 and a 3dmark_max_threads score of 6379. In Fivem, where real-time simulation and network processing can utilize multiple cores, the 6-core/12-thread configuration provides adequate parallel throughput. The L3 cache is 32 MB shared, which helps with data locality in a game that often involves large, dynamic world states. The memory support for DDR5 with dual-channel 83.2 GB/s bandwidth ensures that the CPU can feed data to the GPU without obvious starvation, particularly at lower resolutions where frame generation is CPU-bound.

When compared to its nearest rivals, the 7500F's average benchmark score of 24993 is nearly identical to the Intel Core i7-11850H, which scores 24974 with a deltaPct of 0.1%, and the AMD Ryzen 9 6900HX, which scores 24897 with a deltaPct of 0.4%. It sits slightly below the AMD Ryzen 7 2700X (25057, deltaPct -0.3%) and AMD Ryzen 5 8400F (25064, deltaPct -0.3%). This cluster of scores indicates that the 7500F is positioned in a dense performance band where its relative standing in Fivem will be determined more by the game's specific threading model than by raw aggregate benchmarks.

GPU Role

The NVIDIA GeForce RTX 4090 is the flagship of the GeForce 40-series, built on the Ada Lovelace architecture with a 5 nm process. It features a base clock of 2235 MHz and a boost clock of 2520 MHz, with 24 GB of GDDR6X memory on a 384-bit bus, providing 1.01 TB/s of memory bandwidth. The GPU's raw compute capabilities are reflected in a passmark_g3d score of 38194 and a 3dmark_steel_nomad_dx12 score of 9223, placing it in the 91st percentile of all GPUs with an average benchmark score of 66473.

The RTX 4090's memory configuration of 24 GB is substantial for Fivem, which is a multiplayer modding platform that can load extensive custom assets and textures. The 128 RT cores and 512 tensor cores contribute to the GPU's versatility, though Fivem's rendering workload is primarily rasterization-focused. The 16384 shading units and 512 TMUs provide the fill rate necessary for high-resolution rendering, as evidenced by a pixel rate of 443.5 GPixel/s and a texture rate of 1,290.2 GTexel/s.

The GPU's nearest rivals in benchmark scores are professional and workstation cards: the NVIDIA Tesla T4 (66733, deltaPct -0.4%), NVIDIA Tesla P40 (66127, deltaPct 0.5%), AMD Radeon Pro Vega 56 (67097, deltaPct -0.9%), and NVIDIA Quadro P6000 (67320, deltaPct -1.3%). This comparison underscores that the RTX 4090's gaming performance is not directly mirrored by these compute-oriented cards, but the aggregate scores place them in a similar performance envelope, suggesting that the 4090's advantage in gaming lies more in its driver optimization and feature set than in raw benchmark numbers.

Measured FPS Breakdown

At 1920x1080, the RTX 4090 and Ryzen 5 7500F combination produces exceptionally high frame rates across all settings. Low settings yield 339.2 FPS average, Medium settings produce 288.4 FPS, High settings deliver 231.9 FPS, and Ultra settings drop to 178 FPS. The spread between Low and Ultra at 1080p is 161.2 FPS, which indicates that the GPU has significant headroom at this resolution, and the CPU is likely the limiting factor even at Ultra settings, given that the frame rate remains above 170 FPS.

Moving to 2560x1440, the frame rates remain high but show a more pronounced settings-dependent scaling. Low settings achieve 239.6 FPS, Medium settings produce 192.5 FPS, High settings deliver 153.3 FPS, and Ultra settings fall to 117.1 FPS. The gap between Low and Ultra at 1440p is 122.5 FPS, which is narrower than at 1080p, suggesting that the GPU is beginning to exert more influence on performance at this resolution.

At 3840x2160, the performance drops are more significant. Low settings yield 134.4 FPS, Medium settings produce 103.6 FPS, High settings deliver 81.6 FPS, and Ultra settings bottom out at 68.1 FPS. The difference between Low and Ultra at 4K is 66.3 FPS, which is the smallest absolute spread across the three resolutions. This indicates that at 4K, the GPU is the primary bottleneck, and the CPU's role diminishes as the pixel workload dominates the rendering time.

The settings scaling within each resolution is also informative. At 1080p, the transition from Low to Medium costs 50.8 FPS, from Medium to High costs 56.5 FPS, and from High to Ultra costs 53.9 FPS. This relatively uniform step-down suggests that each settings tier adds a similar incremental GPU load. At 4K, the steps are 30.8 FPS from Low to Medium, 22 FPS from Medium to High, and 13.5 FPS from High to Ultra, showing that the incremental cost of higher settings diminishes as the resolution increases, because the GPU is already heavily loaded.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4090 achieves a rank of 43 out of 1792 tested combos in Fivem, placing it in the top 2.4% of all configurations. This ranking is notably higher than what the CPU's individual percentile (82nd) might suggest, indicating that the GPU's dominance in this pairing compensates for the processor's mid-range standing. The GPU's 91st percentile ranking contributes more significantly to the combo's overall position, as Fivem's performance at the resolutions tested is largely GPU-bound at 4K and CPU-bound at 1080p.

The rank of 43 out of 1792 means that only 42 other combinations of CPUs and GPUs deliver higher average FPS in Fivem. Given that the RTX 4090 is near the top of the GPU hierarchy, the combos that outrank this pairing likely feature even faster CPUs, such as higher-core-count or higher-clocked processors that can better feed the GPU at 1080p and 1440p. The data shows that at 1080p Low, the 339.2 FPS average is likely limited by the CPU's single-thread performance, and a stronger CPU could push this number higher.

The combination's strength is most evident at 1440p, where it delivers 239.6 FPS at Low settings and 117.1 FPS at Ultra, both of which are well above the threshold for high-refresh-rate monitors. At 4K, the combo still provides playable frame rates across all settings, with even the Ultra preset maintaining 68.1 FPS. This balanced performance across the resolution spectrum, combined with the top-2.4% ranking, indicates that this pairing is optimized for gamers who prioritize high frame rates at 1440p while retaining the ability to run 4K at playable speeds. The rank of 43 reflects a system that sits at the upper echelon of tested configurations, with the RTX 4090 providing the bulk of the performance headroom and the Ryzen 5 7500F serving as a capable, though not class-leading, companion.