Evolve

The AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 5090 D delivers a commanding performance profile in Evolve, a 2015 FPS title. The data indicates that this combination is heavily skewed toward GPU-bound performance at higher resolutions, while the CPU’s six Zen 3 cores are more than sufficient to feed the flagship GPU at 1080p. Across all tested settings, the combo never dips below 65 FPS average, making it a robust choice for high-refresh-rate 1440p and solid 4K gameplay.

Resolution Scaling

The performance drop from 1080p to 4K is substantial, revealing a clear GPU-bound scenario at higher resolutions. At High settings, the average frame rate falls from 205 FPS at 1920x1080 to 165 FPS at 2560x1440, a reduction of 40 FPS. Moving to 3840x2160, the average drops further to 94 FPS, representing a 54% decline compared to the 1080p result. This scaling pattern is typical for a game that is heavily reliant on pixel throughput, and the RTX 5090 D’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are clearly being utilized to their fullest at 4K.

At Medium settings, the same trend is visible but with less dramatic percentage losses. The average frame rate goes from 223 FPS at 1080p to 195 FPS at 1440p, then down to 120 FPS at 4K. The 4K figure is still 46% higher than the Ultra preset at the same resolution, indicating that the Medium settings do not impose as severe a load on the GPU’s 21760 shading units. The gap between 1080p and 4K narrows when using Low settings, with 245 FPS and 154 FPS respectively, suggesting that at lower graphical fidelity, the CPU begins to exert more influence on the final frame rate.

The Ultra preset shows the steepest drop, starting at 170 FPS at 1080p, falling to 114 FPS at 1440p, and finally bottoming out at 65 FPS at 4K. This 61.8% reduction from 1080p to 4K is the largest of any preset, confirming that Ultra settings push the RTX 5090 D to its limits. The data suggests that at 1080p, the system is likely CPU-limited in some scenarios, as the difference between Low and Ultra is only 75 FPS, whereas at 4K, the difference between Low and Ultra is 89 FPS, which is a much larger absolute gap. This indicates that as resolution increases, the GPU becomes the primary bottleneck, and the CPU’s 3.00 GHz base clock and 4.00 GHz boost clock are sufficient to keep up.

FAQ

Q: Can this combo maintain a smooth 60 FPS experience at 4K with maximum settings?

A: Yes, the Ultra preset at 3840x2160 yields an average of 65 FPS. This is above the 60 FPS threshold, though it leaves little headroom for demanding scenes. For a more comfortable margin, the High preset at 4K averages 94 FPS.

Q: How does the CPU’s core count affect performance in this game?

A: The Ryzen 5 5600F has 6 cores and 12 threads. Evolve’s engine appears to scale well with the available threads, as the CPU’s PassMark multithread score of 19236 and physics score of 1043 are adequate to prevent bottlenecking the GPU at 1080p, where the GPU is less stressed.

Q: What is the best resolution to use for high-refresh-rate gaming?

A: At 2560x1440 with Medium settings, the combo achieves 195 FPS average, which is ideal for 144Hz or 165Hz monitors. At 1920x1080, the Medium preset reaches 223 FPS, making it suitable for 240Hz displays.

Q: Is there a significant difference between High and Medium settings at 1440p?

A: Yes, the average frame rate drops from 195 FPS on Medium to 165 FPS on High at 2560x1440. This 30 FPS difference indicates that the High preset introduces a notable increase in graphical load, but the RTX 5090 D still delivers very high performance.

Q: Does the RTX 5090 D’s 32 GB VRAM become a limiting factor at 4K?

A: The data does not show any VRAM-related bottlenecks. The 32 GB capacity is more than sufficient for Evolve, and the performance scaling from 1440p to 4K is consistent with a GPU compute limit rather than a memory capacity limit.

Q: What is the minimum FPS observed in the data?

A: The lowest average FPS recorded is 65 at 4K Ultra. The only minimum FPS values provided are for Medium settings: 102 FPS at 4K, 166 FPS at 1440p, and 190 FPS at 1080p. No 1% lows are available for other presets.

How This Combo Ranks

In the broader context of tested combos for Evolve, this pairing of the Ryzen 5 5600F and RTX 5090 D holds the 167th position out of 2872 combinations. This places it in the top 5.8% of all tested systems, indicating a very high level of performance. The rank is influenced by the GPU’s raw power, as the RTX 5090 D sits in the 92nd percentile of all GPUs, while the CPU is in the 85th percentile of all CPUs.

The GPU’s nearest rivals, such as the AMD Radeon RX 6850M XT, have an average benchmark score that is 1.6% higher, but this does not translate into better gaming performance in Evolve. The RTX 5090 D’s 3DMark Steel Nomad score of 14326 and PassMark G3D score of 44065 are indicative of its strength, and the measured FPS in this game confirms that it outperforms its direct competitors in real-world scenarios. The CPU’s nearest rival, the Intel Core Ultra 5 225, has a nearly identical average benchmark score (0% delta), but the Ryzen 5 5600F’s 32 MB shared L3 cache and 7 nm process node provide a solid foundation for gaming.

It is important to note that the combo’s rank of 167 is specific to Evolve; other games with different engine optimizations may see this pairing rank higher or lower. The data shows that this system is not the absolute fastest, but it is firmly in the upper echelon of tested configurations, making it a high-end option for this title.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four settings presets. At 1920x1080, the combo delivers exceptional results: Low settings average 245 FPS, Medium averages 223 FPS (with a minimum of 190 FPS and maximum of 257 FPS), High averages 205 FPS, and Ultra averages 170 FPS. These numbers indicate that at 1080p, the system is capable of driving very high refresh rates, and the difference between presets is relatively small, suggesting a CPU limitation at this resolution.

Moving to 2560x1440, the performance remains strong. Low settings produce 214 FPS, Medium averages 195 FPS (min 166, max 225), High averages 165 FPS, and Ultra averages 114 FPS. The drop from 1080p to 1440p is most pronounced at Ultra, which loses 56 FPS. This is a 32.9% decrease, while Low only loses 31 FPS (12.7% decrease). This pattern reinforces that the higher presets are more demanding on the GPU’s 104.8 TFLOPS FP32 compute capability.

At 3840x2160, the GPU is clearly the limiting factor. Low settings still manage 154 FPS, but Medium drops to 120 FPS (min 102, max 138), High falls to 94 FPS, and Ultra bottoms out at 65 FPS. The scaling from Low to Ultra at 4K is a 57.8% reduction in frame rate, demonstrating that the Ultra preset’s advanced effects are highly taxing on the RTX 5090 D. For players targeting 4K, the High preset offers a balanced 94 FPS average, while those seeking the highest fidelity must accept a 65 FPS average on Ultra.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 65 W TDP. In Evolve, the CPU’s role is to feed the GPU with draw calls and game logic. The PassMark single-thread score of 2872 is strong, and the multithread score of 19236 shows that the 12 threads are well-utilized.

The data suggests that at 1080p, the CPU is a more significant factor. The difference between Low and Ultra at 1080p is 75 FPS, which is less than the 89 FPS difference at 4K. This implies that at 1080p, the CPU is able to keep up with the GPU’s high frame output, but the GPU’s performance is capped by the CPU’s ability to issue commands. The CPU’s 32 MB shared L3 cache helps reduce memory latency, which is beneficial for gaming.

At 4K, the CPU’s load decreases relative to the GPU. The frame rates drop significantly, but the CPU is no longer the bottleneck; the RTX 5090 D’s 176 ROPs and 423.6 GPixel/s pixel rate are the limiting factors. The Ryzen 5 5600F’s 6 cores are sufficient for Evolve, as the game does not appear to require more than 12 threads based on the consistent performance scaling. The CPU’s PassMark physics score of 1043 is a good indicator of its gaming capability, and it does not hold back the GPU in this title.

Settings Recommendations

For the best overall experience, the Medium preset at 2560x1440 is the standout choice. It delivers an average of 195 FPS with a minimum of 166 FPS, ensuring smooth gameplay on high-refresh-rate monitors without the visual compromises of Low settings. The 1440p Medium setting strikes an excellent balance between image quality and performance, making it the recommended configuration for most players.

If you prioritize maximum visual fidelity and have a 4K display, the High preset at 3840x2160 is preferable. It averages 94 FPS, which is well above the 60 FPS playability threshold, and provides a significant visual upgrade over Medium. The Ultra preset at 4K should only be considered if you have a variable refresh rate monitor, as its 65 FPS average is playable but may dip below 60 FPS in intense scenes.

For competitive play at 1080p, the Low preset offers the highest average frame rate at 245 FPS, which is ideal for 240Hz monitors. However, the visual quality is significantly reduced. The Medium preset at 1080p is a viable alternative, providing 223 FPS with a minimum of 190 FPS, ensuring that frame times remain consistent. Ultimately, the data suggests that 1440p Medium is the sweet spot for this combo, offering a high frame rate with good visual fidelity, while 4K High is the best choice for a cinematic experience.