Overpower

The AMD Ryzen 5 5600 and NVIDIA GeForce GTX 1070 pairing in Overpower presents a classic case of a balanced mid-range system hitting its limits at higher resolutions. The measured data shows a clear pattern: the combination delivers playable frame rates at 1080p across all settings, but struggles to maintain smooth performance at 4K, particularly on higher presets. This analysis breaks down the measured FPS, scaling behavior, and component roles based strictly on the provided benchmark results.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, revealing how the GTX 1070 becomes the primary bottleneck as pixel count rises. At Low settings, the average frame rate falls from 106 FPS at 1920x1080 to 95 FPS at 2560x1440, then drops further to 80 FPS at 3840x2160. That is a 24.5% reduction from 1080p to 4K, which is substantial but not catastrophic — the Low preset keeps the GPU workload light enough that the Ryzen 5 5600 can still feed it adequately.

Moving to Medium settings, the scaling becomes more pronounced. The average FPS goes from 66 at 1080p to 59 at 1440p, and then to 50 at 4K. The 1440p result represents a 10.6% drop from 1080p, while the 4K result is 24.2% lower than 1440p. This nonlinear scaling suggests that the GTX 1070's 8 GB of GDDR5 memory and 256-bit bus are starting to feel the pressure as texture and shading demands increase with resolution.

High settings amplify the trend further. At 1080p, the combo averages 62 FPS; at 1440p, it drops to 55 FPS; at 4K, it falls to 47 FPS. The gap between 1440p and 4K here is 14.5%, which is smaller than the Medium preset's drop, indicating that the GPU is already saturated at 1440p on High and the additional resolution has diminishing returns on frame rate. The limiting component is clearly the GPU, as the CPU's single-thread performance remains adequate for this action title.

Ultra settings show the worst scaling. The average FPS starts at 51 at 1080p, drops to 46 at 1440p, and bottoms out at 39 at 4K. The 4K Ultra result is 23.5% lower than the 1080p Ultra result, and critically, it falls below the 40 FPS threshold that many players consider the minimum for fluid action gameplay. The data indicates that at 4K, only the Low preset (80 FPS) delivers a comfortably playable experience, while Medium (50 FPS) and High (47 FPS) are borderline, and Ultra (39 FPS) is not viable.

The scaling pattern across all settings shows that the GTX 1070's compute power — 6.463 TFLOPS FP32 and 202.0 GTexel/s texture rate — is insufficient for 4K gaming on this title beyond minimal settings. The 1080p to 1440p transition is more manageable, with frame rate drops ranging from 9.7% (Low) to 13.0% (Ultra), but the 1440p to 4K jump consistently erodes 15-25% of performance.

GPU Role

The NVIDIA GeForce GTX 1070, built on the Pascal architecture with the GP104 chip, plays the dominant role in these results. Its 8 GB of GDDR5 memory on a 256-bit bus provides 256.3 GB/s of bandwidth, which is sufficient for 1080p and 1440p gaming but becomes a constraint at 4K. The memory clock runs at 2002 MHz (8 Gbps effective), and the GPU has 1920 shading units, 120 TMUs, and 64 ROPs.

The VRAM capacity is adequate for the measured settings, as none of the rows show signs of memory-related stuttering that would appear as min FPS anomalies. The Medium preset at 4K shows a min FPS of 43 and max of 58, which is a narrow range, suggesting the GPU is consistently busy rather than hitting memory or bandwidth walls. However, the overall average FPS at 4K Medium (50) is only 75.8% of the 1080p Medium result (66), indicating that the GPU's raw throughput is the limiting factor.

Clock speeds matter here. The base clock is 1506 MHz and the boost clock is 1683 MHz, which are moderate for the Pascal generation. These clocks, combined with the 16 nm process node from TSMC, allow the GTX 1070 to sustain decent performance at 1080p but not at higher resolutions. The GPU's pixel rate of 107.7 GPixel/s and texture rate of 202.0 GTexel/s are the specifications that directly influence how many pixels and texels it can process per second, and the measured FPS reflects these limits.

The GTX 1070's percentile ranking of 47 among all GPUs places it in the mid-range, and its nearest rivals in average benchmark score include the AMD FirePro W5000 (deltaPct -0.2) and NVIDIA Quadro M2000M (deltaPct -0.5), which are workstation cards rather than gaming parts. This positioning means the GTX 1070 is a capable 1080p card that can handle 1440p with some settings compromises, but it is not designed for 4K gaming. The data confirms this: at 1080p, all four presets average above 50 FPS, which is playable, but at 4K, only Low clears 60 FPS.

The GPU's 150 W TDP and 8-pin power connector are modest by modern standards, but the measured performance is what matters. In Overpower, the GTX 1070's role is to deliver smooth 1080p gameplay and acceptable 1440p performance, while 4K requires dropping to Low settings to stay above 60 FPS.

FAQ

*Q: What is the best resolution for this combo in Overpower?*

A: Based on the measured data, 1920x1080 is the sweet spot. At 1080p, every preset averages above 50 FPS, with Low hitting 106 FPS, Medium at 66 FPS, High at 62 FPS, and Ultra at 51 FPS. At 1440p, only Low (95 FPS) and Medium (59 FPS) are consistently playable, while 4K requires Low settings (80 FPS) for smooth performance.

*Q: Can this system handle 4K gaming in Overpower?*

A: Yes, but only on Low settings, which averages 80 FPS. Medium (50 FPS) and High (47 FPS) are borderline, while Ultra (39 FPS) is below the acceptable threshold for action games. The GTX 1070's 8 GB VRAM and 256.3 GB/s bandwidth are not enough for higher presets at 3840x2160.

Q: How does the Ryzen 5 5600's CPU performance affect these results?

A: The Ryzen 5 5600, with 6 cores and 12 threads, scores 882 in the 3dmark single-thread test and 5659 in the max-threads test. In Overpower, the CPU does not appear to be the bottleneck, as the FPS scaling follows the GPU's capabilities closely. The CPU's 74th percentile ranking among all CPUs indicates it is adequate for this title.

Q: Is the GTX 1070 a good match for the Ryzen 5 5600 in this game?

A: Yes, for 1080p and 1440p gaming. The combo ranks 3070 out of 3713 tested combos in Overpower, placing it in the lower-middle range. The GPU is the limiting factor at higher resolutions, but the CPU provides enough headroom to avoid bottlenecking at lower settings.

Q: What are the min FPS values for the Medium preset?

A: For the Medium preset, the measured min FPS values are 56 at 1080p, 50 at 1440p, and 43 at 4K. The max FPS values are 76, 68, and 58 respectively. These ranges show that frame pacing is stable, with no severe drops that would indicate stuttering.

Q: How does the GTX 1070 compare to its nearest rivals in benchmark scores?

A: The GTX 1070 has an average benchmark score of 9780, which is 0.2% lower than the AMD FirePro W5000 (9803) and 0.5% lower than the NVIDIA Quadro M2000M (9832). It is 0.6% higher than the NVIDIA Tesla M10 (9724) and 0.7% higher than the NVIDIA Tesla C2070 (9716). These differences are negligible in gaming performance.

Settings Recommendations

For the best experience per the measured rows, the Medium preset at 1920x1080 is the recommended starting point. It averages 66 FPS with a min of 56 and max of 76, providing smooth gameplay with a comfortable margin above 60 FPS. The High preset at 1080p (62 FPS) is also viable, but Medium offers a slightly higher average with the same resolution, making it the better choice for consistent performance.

At 2560x1440, the Medium preset is the most balanced option, averaging 59 FPS with a min of 50 and max of 68. This is playable, though the min FPS of 50 is close to the edge for action games. The Low preset at 1440p (95 FPS) is the safest choice for competitive play, but Medium provides better visual quality while staying above 50 FPS. Avoid High (55 FPS) and Ultra (46 FPS) at 1440p unless you prioritize visuals over frame rate stability.

For 3840x2160, the Low preset is the only sensible recommendation, averaging 80 FPS. Medium (50 FPS) and High (47 FPS) are technically playable but risk dips in demanding scenes, while Ultra (39 FPS) is not recommended. The data shows that 4K gaming on this combo requires sacrificing visual fidelity for performance.

The Ultra preset is not worth using at any resolution. At 1080p, it averages 51 FPS, which is only 15 FPS lower than Medium but with a significant visual quality penalty. At 1440p, Ultra (46 FPS) is barely playable, and at 4K, it drops to 39 FPS. The performance cost of Ultra settings — likely due to increased shading and texture demands — outweighs the visual benefits for this GPU.

If you are targeting 60 FPS consistently, the Low preset at 1080p (106 FPS) or 1440p (95 FPS) is the only guaranteed option. For a balance of quality and speed, Medium at 1080p or 1440p is the best compromise, with the former providing a more comfortable margin above 60 FPS.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600 and NVIDIA GeForce GTX 1070 ranks 3070 out of 3713 tested combos in Overpower, placing it in the 17th percentile of all configurations. This is a low ranking, reflecting the GTX 1070's age and mid-range positioning. The CPU ranks in the 74th percentile among all CPUs, but the GPU ranks in the 47th percentile among all GPUs, and the combo score is dragged down by the GPU's limitations.

The nearest rivals for the CPU in average benchmark score are the Intel Core Ultra 7 258V (deltaPct 0.1), AMD Ryzen 5 8500G (deltaPct 0.2), AMD EPYC 9454P (deltaPct 0.2), and AMD EPYC 7713 (deltaPct 0.5). These are all within 0.5% of the Ryzen 5 5600's score of 20468, showing that the CPU's performance is solid. For the GPU, the nearest rivals are the AMD FirePro W5000 (deltaPct -0.2), NVIDIA Quadro M2000M (deltaPct -0.5), NVIDIA Tesla M10 (deltaPct 0.6), and NVIDIA Tesla C2070 (deltaPct 0.7), all within 1% of the GTX 1070's score of 9780.

The combo rank of 3070 out of 3713 indicates that most other tested configurations outperform this pairing in Overpower. This is expected given the GTX 1070's age — it was released in 2016 and is now end-of-life — and its 47th percentile GPU ranking. The Ryzen 5 5600, released in 2022, is relatively modern, but the GPU holds the combo back. In terms of measured FPS, the combo is competitive at 1080p Low (106 FPS) and 1440p Low (95 FPS), but falls behind at higher settings and resolutions.

The data suggests that this combo is best suited for 1080p gaming on Medium or High settings, where it delivers 62-66 FPS. For 1440p, it is a capable entry-level option on Low or Medium, but it cannot sustain high frame rates on higher presets. The 4K results are poor, with only Low settings providing a smooth experience.

Measured FPS Breakdown

1920x1080 (1080p)

• Low: 106 FPS average
• Medium: 66 FPS average, 56 FPS min, 76 FPS max
• High: 62 FPS average
• Ultra: 51 FPS average

2560x1440 (1440p)

• Low: 95 FPS average
• Medium: 59 FPS average, 50 FPS min, 68 FPS max
• High: 55 FPS average
• Ultra: 46 FPS average

3840x2160 (4K)

• Low: 80 FPS average
• Medium: 50 FPS average, 43 FPS min, 58 FPS max
• High: 47 FPS average
• Ultra: 39 FPS average

The data shows a clear hierarchy: at each resolution, Low settings provide the highest frame rate, followed by Medium, High, and Ultra. The gaps between presets are consistent, with Medium typically being 10-20 FPS lower than Low, and Ultra being 10-15 FPS lower than Medium. The min and max FPS values for Medium show a narrow range (10-20 FPS), indicating stable performance without major frame time spikes. The 4K Medium range (43-58 FPS) is the widest, suggesting that the GPU is under more stress at that resolution. Overall, this combo delivers its best performance at 1080p, with 1440p being a viable alternative on lower presets, and 4K reserved for Low settings only.