Overpower

Overpower

AVERAGE FPS
63
good

This combination provides smooth gameplay with an average of 63 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 37 49 52 79
1440p QHD 48 56 58 93
1080p Full HD 50 64 66 106

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 79
3840x2160 Medium 52
3840x2160 High 49
3840x2160 Ultra 37
2560x1440 Low 93
2560x1440 Medium 58
2560x1440 High 56
2560x1440 Ultra 48
1920x1080 Low 106
1920x1080 Medium 66
1920x1080 High 64
1920x1080 Ultra 50

Overpower with AMD Ryzen 5 4600G + NVIDIA GeForce GTX 1070, In-Depth Analysis

The AMD Ryzen 5 4600G and NVIDIA GeForce GTX 1070 combination lands at rank 1468 out of 1744 tested combos in Overpower. That places it in the lower third of all pairings, a position driven almost entirely by the GPU’s middling standing rather than the processor’s. The CPU itself sits in the 75th percentile against all CPUs, while the GPU is in the 51st percentile against all GPUs. The data shows a system that can hit playable frame rates at 1080p but will require settings discipline as resolution climbs.

How This Combo Ranks

This pairing’s rank of 1468 out of 1744 combos is a clear verdict: it is a mid-to-low tier setup for Overpower. The gap between the two components’ percentile standings is the story. The Ryzen 5 4600G, with an average benchmark score of 17489, is competitive with its nearest rivals: it sits virtually tied with the AMD Ryzen 3 PRO 5355GE (deltaPct 0), and it is 0.1% ahead of the Intel Core i5-12450H. It trails the Intel Core i3-14100T by 0.8% and the Intel Core i3-13100F by 1%. That is a tight cluster, meaning the CPU is not the bottleneck in this pairing.

The GTX 1070, however, is a different story. Its average benchmark score of 12331 puts it in the 51st percentile, and its nearest rivals show it is barely holding its own. The NVIDIA Quadro K4200 is 0.7% behind, the GeForce GTX 880M is 1.3% ahead, the GeForce GTX 1650 SUPER is 1.4% ahead, and the Tesla K20Xm is 1.7% ahead. The GPU is essentially at parity with a group of cards from different eras, which explains why the combo rank lags so far behind the CPU’s individual standing. The processor is doing its job; the graphics card is the ceiling.

GPU Role

The GTX 1070 is an 8 GB GDDR5 card with a 256-bit memory bus and 256.3 GB/s of bandwidth. Its base clock is 1506 MHz, boosting to 1683 MHz. The memory runs at 2002 MHz, or 8 Gbps effective. Those figures are respectable for 1080p gaming, but Overpower’s results show the card’s limits at higher resolutions.

The benchmark data shows a clear pattern: the GTX 1070 delivers its best work at 1080p, where it can push past 100 FPS on Low. But the card’s 1920 shading units and 64 ROPs are not enough to maintain high frame rates when pixel count rises. The 6.463 TFLOPS of FP32 performance is the raw capability here, and it is simply not scaled for 4K Ultra. The card’s 51st percentile ranking among all GPUs, combined with its proximity to the GTX 1650 SUPER (1.4% faster), tells you this is a card that was mid-range at launch and has not aged into a high-resolution champion.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and revealing. At High settings, the average FPS falls from 64.1 at 1920x1080 to 55.7 at 2560x1440, then to 49.1 at 3840x2160. That is a 23.4% reduction from 1080p to 4K. At Low settings, the drop is more dramatic: 105.5 FPS at 1080p falls to 93.2 at 1440p, then to 78.8 at 4K — a 25.3% reduction.

The pattern indicates the GPU is the limiting component. When settings are lowered, the CPU has more headroom to feed frames, but the GPU still cannot maintain 4K performance. At Medium settings, the 1080p result is 65.8 FPS, dropping to 57.7 at 1440p and 52.3 at 4K. At Ultra, the 1080p result is 49.5 FPS, falling to 47.8 at 1440p and 36.7 at 4K. The scaling is consistent: each resolution step costs roughly 10-15 FPS at lower settings, but at Ultra, the 4K result collapses to 36.7 FPS, which is below the playable threshold for most action games.

Measured FPS Breakdown

The measured rows provide a complete picture. At 1920x1080, the Low preset delivers 105.5 FPS average, which is the highest result in the entire dataset. Medium follows at 65.8 FPS, High at 64.1 FPS, and Ultra at 49.5 FPS. The jump from Low to Medium is significant — a 38.6% drop — while the gap between Medium and High is marginal at 2.6%.

At 2560x1440, the order remains the same but the numbers compress. Low delivers 93.2 FPS, Medium 57.7 FPS, High 55.7 FPS, and Ultra 47.8 FPS. The drop from Low to Medium is 38.1%, nearly identical to the 1080p pattern. The gap between Medium and High shrinks to 3.5%.

At 3840x2160, the card struggles. Low delivers 78.8 FPS, Medium 52.3 FPS, High 49.1 FPS, and Ultra 36.7 FPS. The difference between Medium and High at 4K is just 6.1%, and Ultra falls below the 40 FPS mark. The data suggests that 4K is only viable on Low settings, and even then, the 78.8 FPS result is the only 4K number above 60.

FAQ

*Q: Can this combo run Overpower at 4K?*

A: Only on Low settings. The 3840x2160 Low preset delivers 78.8 FPS average, while Medium drops to 52.3 FPS. High and Ultra fall to 49.1 and 36.7 FPS respectively, making them unsuitable for smooth play.

Q: What is the best resolution for this setup?

A: 1920x1080 is the clear winner. Every settings preset at 1080p outperforms its 1440p counterpart by at least 8.4 FPS, and the Low preset achieves 105.5 FPS, which is the highest measured result.

Q: How does the GTX 1070 compare to its nearest rival, the GTX 1650 SUPER?

A: The GTX 1650 SUPER is 1.4% faster in average benchmark score. The GTX 1070 also trails the Tesla K20Xm by 1.7% and the GTX 880M by 1.3%, while leading the Quadro K4200 by 0.7%.

Q: Is the CPU holding back the GPU?

A: No. The Ryzen 5 4600G is in the 75th percentile of all CPUs and is within 1% of its nearest rivals. The GPU is in the 51st percentile, making it the limiting factor in this pairing.

Q: What is the difference between High and Ultra settings at 1440p?

A: High delivers 55.7 FPS, while Ultra delivers 47.8 FPS. That is a 14.2% reduction in performance for the jump to Ultra, which may not justify the visual gain.

Q: Does the 8 GB VRAM cause issues?

A: The data does not show VRAM throttling specifically, but the card’s performance at 4K Ultra (36.7 FPS) suggests the GPU’s compute capability, not just memory capacity, is the constraint.

Settings Recommendations

The best experience per the measured rows is the 1920x1080 High preset, which delivers 64.1 FPS. It sits above the 60 FPS threshold for smooth action gameplay, and it is only 2.6% slower than Medium at 65.8 FPS. The jump to Ultra at 1080p costs 22.8% performance, dropping to 49.5 FPS, which is below the ideal target. For players willing to prioritize frame rate, the 1080p Low preset at 105.5 FPS is the smoothest option, but the visual trade-off is substantial.

At 2560x1440, the High preset at 55.7 FPS is the most balanced choice, though it is just below 60 FPS. Medium at 57.7 FPS is marginally faster, but the difference is negligible. At 3840x2160, only Low at 78.8 FPS is playable; Medium at 52.3 FPS and High at 49.1 FPS are borderline, and Ultra at 36.7 FPS is not recommended. The data strongly favors 1080p as the primary resolution for this combo.

CPU Role

The Ryzen 5 4600G is a 6-core, 12-thread processor based on Zen 2 architecture, built on TSMC’s 7 nm process. It has a base clock of 3.70 GHz and a boost clock of 4.20 GHz, with 8 MB of shared L3 cache. Its 65 W TDP and AM4 socket make it an efficient, mainstream chip. In Overpower, the CPU’s role is supportive: it feeds the GPU without becoming the bottleneck.

The benchmark results back this up. The CPU’s multi-threaded scores are strong: Cinebench R23 multi-core at 13593, Geekbench multi-core at 6093, and Passmark multi-thread at 15992. The single-thread scores are also solid, with Cinebench R23 single-core at 1919 and Passmark single-thread at 2653. The CPU’s 75th percentile ranking against all CPUs, combined with its near-tie against the Ryzen 3 PRO 5355GE and the i5-12450H, confirms it is not the weak link.

The 4600G’s integrated Radeon Vega 7 graphics are irrelevant here since the system uses a discrete GTX 1070, but the CPU’s 12 threads ensure that Overpower’s action sequences have enough processing headroom. The data shows that when the GPU is stressed at 4K Ultra, the FPS drops to 36.7, but the CPU is still capable of delivering frames — it is the GPU’s 51st percentile standing that caps the system. In short, the CPU is performing at a level that would support a faster graphics card, but this combo is ultimately defined by the GTX 1070’s limits.

Hardware Specifications

AMD Ryzen 5 4600G

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce GTX 1070 in Overpower

Resolution Settings Avg FPS
3840x2160 Low 78.8
3840x2160 Medium 52.3
3840x2160 High 49.1
3840x2160 Ultra 36.7
2560x1440 Low 93.2
2560x1440 Medium 57.7
2560x1440 High 55.7
2560x1440 Ultra 47.8
1920x1080 Low 105.5
1920x1080 Medium 65.8
1920x1080 High 64.1
1920x1080 Ultra 49.5

Overpower with GTX 1070 + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with Ryzen 5 4600G + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.