Overpower

Resolution Scaling

The measured FPS data for Overpower shows a clear pattern of scaling as resolution increases, with the RX 9070 XT demonstrating strong headroom at lower resolutions but the Ryzen 5 3600 becoming an increasingly relevant factor as pixel counts rise. At 1080p Low, the combo delivers 169 FPS average; moving to 1440p Low drops that to 163 FPS, a 3.6% reduction, and at 4K Low the average falls to 154 FPS, another 5.5% step down. This relatively modest scaling between Low presets across resolutions suggests the GPU is not yet saturated at lower settings, with the CPU likely limiting the ceiling even at 1080p.

The High preset tells a different story. At 1080p High, the average is 123 FPS; at 1440p High it falls to 109 FPS, an 11.4% drop, and at 4K High the average reaches 93 FPS, a further 14.7% reduction. The larger percentage declines at High settings indicate the GPU is becoming more heavily utilized as shading work increases, though the 4K High result of 93 FPS still demonstrates playable performance. Medium settings show a similar progression: 132 FPS at 1080p, 118 FPS at 1440p, and 100 FPS at 4K, with the 4K Medium row including a minimum of 85 FPS and maximum of 115 FPS, suggesting some frame-time variability at that resolution.

Ultra settings produce the steepest scaling curve. At 1080p Ultra, the average is 102 FPS; at 1440p Ultra it declines to 91 FPS, a 10.8% drop, and at 4K Ultra the average reaches 77 FPS, a 15.4% reduction from the 1440p figure. The 4K Ultra result represents the lowest measured average across all tested configurations, but it remains comfortably above typical playability thresholds. The data indicates that the limiting component shifts between presets: at Low settings, the Ryzen 5 3600's six cores and twelve threads appear to cap performance around the 154-169 FPS range regardless of resolution, while at Ultra settings the RX 9070 XT's rendering load dominates, producing the wider FPS deltas between resolutions.

FAQ

Q: What is the highest average FPS this combo achieves in Overpower?

A: The highest measured average is 169 FPS at 1920x1080 with Low settings. The next closest is 163 FPS at 2560x1440 Low, indicating that the CPU, not the GPU, is the primary limiter at minimum settings.

Q: Does the combo maintain playable frame rates at 4K Ultra?

A: Yes, the 4K Ultra configuration delivers 77 FPS on average. While this is the lowest result in the dataset, it remains above 60 FPS and indicates the RX 9070 XT has sufficient compute headroom for demanding settings at maximum resolution.

Q: How large is the performance gap between Low and Ultra at the same resolution?

A: At 1080p, the gap is 67 FPS (169 FPS Low versus 102 FPS Ultra). At 1440p, the gap is 72 FPS (163 FPS versus 91 FPS). At 4K, the gap is 77 FPS (154 FPS versus 77 FPS). The widening gap at higher resolutions suggests the GPU becomes the dominant bottleneck as pixel count increases.

Q: What are the minimum and maximum FPS recorded for the 4K Medium preset?

A: The 4K Medium preset shows a minimum of 85 FPS and a maximum of 115 FPS, with an average of 100 FPS. This 30 FPS range indicates moderate frame-time variance, likely driven by scene complexity changes.

Q: How does the CPU's multithreaded performance compare to its nearest rivals?

A: The Ryzen 5 3600 has an average benchmark score of 17035, placing it within 0.2% of the Intel Core i7-1260P (17007), Intel Core i5-11400 (17067), AMD EPYC 7573X (17070), and AMD EPYC 7742 (16998). These deltas are statistically negligible, meaning the CPU's multithreaded capability is comparable to those four processors.

Q: What is the GPU's percentile ranking among all tested graphics cards?

A: The RX 9070 XT holds a percentile rank of 55 against all GPUs in the database, with an average benchmark score of 13543. Its nearest rivals include the AMD Radeon HD 7770M (13536, 0.1% faster) and NVIDIA GeForce GTX 570 (13515, 0.2% faster).

CPU Role

The AMD Ryzen 5 3600 is a six-core, twelve-thread processor based on the Zen 2 architecture, manufactured on TSMC's 7 nm process. Its base clock is 3.60 GHz with a boost clock of 4.20 GHz, and it features 32 MB of shared L3 cache alongside 512 KB L2 and 64 KB L1 per core. The CPU's 65 W TDP and unlocked multiplier make it a flexible platform component, though its 2019 release date predates the RX 9070 XT by several years, creating a generational gap that shows in Overpower's frame rates.

Benchmark data places the Ryzen 5 3600 at the 71st percentile among all CPUs, with an average benchmark score of 17035. Its nearest rivals are tightly clustered: the Intel Core i7-1260P scores 17007 (0.2% higher), the Intel Core i5-11400 scores 17067 (0.2% lower), the AMD EPYC 7573X scores 17070 (0.2% lower), and the AMD EPYC 7742 scores 16998 (0.2% higher). This clustering suggests the Ryzen 5 3600's multithreaded throughput is well-matched to mid-range desktop processors from roughly the same era, though its single-thread performance — a 3dmark_single_thread score of 696 and a Cinebench R23 single-core score of 2124 — indicates it is not a modern high-IPC part.

In Overpower specifically, the CPU's influence is most visible at Low settings. The 1080p Low average of 169 FPS and the 1440p Low average of 163 FPS are separated by only 6 FPS, while the 4K Low average of 154 FPS is just 9 FPS below that. This compression suggests the game's low-detail rendering path is not demanding enough to fully utilize the RX 9070 XT, leaving the Ryzen 5 3600's six cores as the performance ceiling. The 3dmark_16_threads score of 4605 and 3dmark_max_threads score of 4603 indicate that twelve threads provide adequate parallelism for most workloads, but Overpower may be sensitive to per-core performance, which the 3dmark_single_thread score of 696 reflects as a relatively modest single-thread capability.

The CPU's memory bandwidth of 51.2 GB/s, delivered through dual-channel DDR4, could also factor into frame pacing at lower resolutions where the GPU is waiting on data. However, the measured FPS at 4K Ultra (77 FPS) versus 4K Low (154 FPS) shows a 2x difference, suggesting that when the GPU is heavily loaded, the CPU has ample time to feed it. The system RAM's bandwidth is not directly tested in this dataset, but the CPU's architecture supports DDR4, which limits peak memory throughput compared to newer platforms.

How This Combo Ranks

Within the benchmark database's tested combinations for Overpower, this pairing of the AMD Ryzen 5 3600 with the AMD Radeon RX 9070 XT ranks 1083 out of 3713 total combos. This places the configuration in the upper third of all tested systems, specifically at the 29th percentile from the top (or 71st percentile from the bottom). The rank reflects the entire system's measured FPS across all resolutions and settings, not just peak performance, so the 4K Ultra result of 77 FPS and 1080p Low result of 169 FPS both contribute to the aggregate score.

The rank of 1083 indicates that roughly 2,630 tested combos deliver lower measured performance in Overpower, while about 1,082 deliver higher results. This positioning is consistent with the components' individual percentiles: the CPU sits at the 71st percentile among all CPUs, and the GPU sits at the 55th percentile among all GPUs. The combo's rank is slightly better than the GPU's percentile might suggest, likely because the Ryzen 5 3600's strong multithreaded scores (Cinebench R23 multicore of 15045, Passmark multithread of 17700) help sustain frame rates in CPU-bound scenarios.

The data shows that this combo is not a top-tier configuration for Overpower, but it is far from entry-level. The 1080p Ultra average of 102 FPS and 1440p Ultra average of 91 FPS both sit well above 60 FPS, meaning the system can handle high-refresh-rate monitors at reduced resolutions. The 4K Ultra average of 77 FPS, while lower, still provides a smooth experience for most players. The rank of 1083 out of 3713 suggests that many modern combos with newer CPUs or higher-tier GPUs will outperform it, but the measured results demonstrate that this pairing remains viable for the game.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. The Low preset averages 169 FPS, the Medium preset averages 132 FPS with a minimum of 112 FPS and maximum of 152 FPS, the High preset averages 123 FPS, and the Ultra preset averages 102 FPS. The spread from Low to Ultra at this resolution is 67 FPS, showing that the GPU's rendering load increases substantially with each preset tier.

Moving to 2560x1440, the average FPS figures decline across all presets. Low averages 163 FPS, Medium averages 118 FPS with a minimum of 100 FPS and maximum of 135 FPS, High averages 109 FPS, and Ultra averages 91 FPS. The delta between Low and Ultra at this resolution is 72 FPS, slightly wider than at 1080p, indicating the GPU is becoming more of a limiting factor as pixel count grows.

At 3840x2160, the averages continue to fall. Low averages 154 FPS, Medium averages 100 FPS with a minimum of 85 FPS and maximum of 115 FPS, High averages 93 FPS, and Ultra averages 77 FPS. The Low-to-Ultra delta at 4K is 77 FPS, the largest of any resolution. Notably, the 4K Medium minimum of 85 FPS is higher than the 4K Ultra average of 77 FPS, showing that dropping from Ultra to Medium provides a meaningful performance uplift without sacrificing too much visual quality.

The only settings tier with complete min/max data is Medium across all three resolutions. At 1080p Medium, the 112-152 FPS range represents a 40 FPS spread; at 1440p Medium, the 100-135 FPS range is a 35 FPS spread; and at 4K Medium, the 85-115 FPS range is a 30 FPS spread. The narrowing range at higher resolutions suggests that frame-time variance decreases as the GPU becomes more uniformly loaded, though the absolute minimums also drop.

Settings Recommendations

Based on the measured FPS rows, the Medium preset offers the best balance of visual quality and performance across all resolutions. At 1080p Medium, the 132 FPS average with a minimum of 112 FPS ensures smooth gameplay even during demanding scenes, while the 1440p Medium average of 118 FPS and 4K Medium average of 100 FPS both remain well above 60 FPS. The Medium preset's minimums — 112, 100, and 85 FPS respectively — are also the highest recorded minimums in the dataset, suggesting it provides the most consistent frame delivery.

For players targeting 1080p with a high-refresh-rate monitor, the High preset at 123 FPS is a reasonable choice, though it sacrifices 9 FPS compared to Medium. The Ultra preset at 1080p averages 102 FPS, which is still playable but shows a 30 FPS drop from Medium. At 1440p, the High preset averages 109 FPS, making it a strong option for quality-focused players, but the Ultra preset drops to 91 FPS, which is acceptable but leaves less headroom for frame drops.

At 4K, the Medium preset is the clear recommendation. The 100 FPS average and 85 FPS minimum are both comfortable for smooth play, while the High preset at 93 FPS and Ultra at 77 FPS offer progressively less margin. The Low preset, while achieving 154 FPS at 4K, likely sacrifices too much visual fidelity in an action game to be a primary choice. The data indicates that Medium settings at 4K provide the best combination of frame rate and visual quality for this combo, with High at 1440p as the alternative for players who prioritize aesthetics over higher FPS.

GPU Role

The AMD Radeon RX 9070 XT is built on the RDNA 4.0 architecture using TSMC's 4 nm process, with a 357 mm² die containing 53,900 million transistors. It features 4096 shading units, 256 texture mapping units, 128 render output units, and 64 ray tracing cores. The GPU's base clock is 1660 MHz, its game clock is 2400 MHz, and its boost clock reaches 2970 MHz, with memory running at 2518 MHz (20.1 Gbps effective) across a 256-bit bus for 644.6 GB/s bandwidth. The 16 GB of GDDR6 memory provides ample capacity for high-resolution textures in Overpower.

The GPU's benchmark profile shows a strong compute capability: 3dmark_steel_nomad_dx12 scores 7260, Geekbench Vulkan scores 65879, and Passmark G3D scores 26795. However, its percentile rank of 55 among all GPUs, with an average benchmark score of 13543, places it in the mid-range of the database. The nearest rivals are the AMD Radeon HD 7770M (13536, 0.1% faster), NVIDIA GeForce GTX 570 (13515, 0.2% faster), NVIDIA P106-090 (13470, 0.5% faster), and AMD Radeon Pro 555 (13407, 1% faster). These deltas are minimal, indicating that the RX 9070 XT's average benchmark score is closely matched by several older or lower-tier GPUs, though its peak performance (as seen in the 3dmark and Geekbench tests) is far higher.

In Overpower, the GPU's role is most evident at Ultra settings and higher resolutions. The 4K Ultra average of 77 FPS versus the 1080p Ultra average of 102 FPS shows a 25 FPS penalty for quadrupling the pixel count, which is a modest scaling penalty for a modern GPU. The 16 GB VRAM capacity is likely sufficient for the game's highest texture presets at 4K, as the minimum FPS of 85 at 4K Medium does not suggest memory pressure artifacts. The GPU's pixel rate of 380.2 GPixel/s and texture rate of 760.3 GTexel/s provide the raw throughput needed for the measured 4K High average of 93 FPS, while the FP32 compute of 48.66 TFLOPS supports the complex shading work in Ultra presets.

The RX 9070 XT's 304 W TDP and 700 W suggested PSU requirement indicate it is a power-hungry component, but the measured FPS data shows it delivers consistent performance in Overpower across all tested configurations. The GPU's strong showing at 4K Medium (100 FPS) and 4K High (93 FPS) suggests that it is not the primary bottleneck in most settings, with the Ryzen 5 3600's CPU performance becoming the limiting factor at lower resolutions and presets.