Overpower

The AMD Ryzen 5 3600 and AMD Radeon RX 7600 combination delivers a distinct performance profile in Overpower, one that is heavily dictated by resolution and graphics settings. The measured data reveals a system where the GPU scaling from 1080p to 4K is substantial, yet the CPU still provides a robust foundation at lower resolutions. This analysis breaks down the measured FPS, contextualizes the combo’s standing among tested hardware, and answers key questions about its behavior in this specific Action title.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The performance delta between 1080p and 4K is pronounced, but the shape of that scaling shifts depending on the quality preset. At Low settings, the transition from 1920x1080 to 3840x2160 sees the average frame rate fall from 129.1 FPS to 100.1 FPS, a drop of approximately 29 frames. This is a relatively modest decline in percentage terms, indicating that at Low settings, the CPU is still a meaningful contributor to the final frame rate even at 4K.

Moving to High settings reveals a steeper curve. The average FPS at 1080p is 74.6, which falls to 70.2 at 1440p, and then to 54.5 at 4K. The step from 1440p to 4K represents a 22.4% reduction in performance, a clear sign that the Radeon RX 7600 is becoming the primary bottleneck as pixel count rises. The pattern is similar with Medium settings, where the frame rate drops from 79.4 at 1080p to 76.2 at 1440p, and then sharply to 63.1 at 4K.

The Ultra preset tells the most definitive story. At 1080p, the combo manages 65.6 FPS, which is respectable for a demanding setting. At 1440p, this falls to 55.8 FPS, and at 4K, it bottoms out at 50.1 FPS. The scaling here is nearly linear, suggesting that the GPU’s compute and memory resources are saturated. The 8 GB of GDDR6 memory on a 128-bit bus, with 288.0 GB/s of bandwidth, is likely a constraining factor at 4K Ultra, where texture and geometry workloads strain the memory subsystem.

The data indicates that the Ryzen 5 3600, with its 6 cores and 12 threads, is sufficient to feed the RX 7600 at 1080p and 1440p across most settings. The gap between 1080p and 1440p at Low settings is only 12.7 FPS, while at High settings it is a mere 4.4 FPS; this suggests that the CPU is not the limiting factor in those scenarios. However, at 4K, the GPU becomes the unequivocal bottleneck, as the FPS differences between presets narrow, and the absolute numbers converge to a range of 50-100 FPS depending on the load.

How This Combo Ranks — use comboRankInGame vs other tested combos

In the database of tested hardware configurations for Overpower, this specific pairing of the AMD Ryzen 5 3600 and AMD Radeon RX 7600 holds a combo rank of 1172 out of 1744 tested combinations. This places it in the 67th percentile of all combos, meaning it outperforms roughly two-thirds of the systems tested in this game. While that might not sound like a top-tier position, it is important to contextualize this rank with the hardware’s age and tier.

The GPU’s individual percentile is 63, placing it above the median but below the high-end. The CPU’s percentile is 76, indicating that the processor is relatively stronger in the broader benchmark suite than the graphics card. The combo rank of 1172 reflects the GPU’s influence on this title, as Overpower appears to be graphically intensive, particularly at higher resolutions.

Relative to its nearest rivals, the RX 7600 is tightly clustered. The AMD Radeon RX 7600 XT is only 0.6% faster in average benchmark score, while the NVIDIA GeForce RTX 3070 Mobile is 1.3% slower. This suggests that the RX 7600 is at the center of a competitive performance band. The CPU side is similarly close, with the Intel Core i5-11400 being 0.1% slower and the AMD Ryzen 5 1600 being 0.2% slower. This tight grouping implies that small changes in system configuration could shift the combo rank significantly, but the data shows that this pairing is a balanced mid-range solution.

The rank also suggests that many higher-ranked combos likely include newer or more powerful GPUs. The 4K performance, which hovers around 50 FPS on Ultra, is a clear ceiling that prevents this combo from climbing higher in the rankings. For a 1080p or 1440p gaming focus, the rank would be more favorable, but the aggregate rank across all tested scenarios pulls it down.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The combo achieves an average of 74.6 FPS at 1920x1080 with High settings, which is a playable frame rate for most users.

Q: How does the combo perform at 4K on the Ultra preset?

A: At 3840x2160 with Ultra settings, the average frame rate is 50.1 FPS. This is below the 60 FPS threshold often preferred for smooth gameplay, indicating that 4K Ultra is not a target for this hardware.

Q: Is the CPU or GPU the limiting factor in this game?

A: At 1080p and 1440p, the GPU is the primary bottleneck, as evidenced by the small FPS differences between those resolutions. At 4K, the GPU is definitively the limiting component, with the frame rate dropping below 60 FPS on High settings.

Q: What is the best resolution and settings combination for a high refresh rate monitor?

A: The highest average frame rate recorded is 129.1 FPS at 1920x1080 with Low settings. For a balance of quality and speed, 1080p High at 74.6 FPS or 1440p Medium at 76.2 FPS are viable options.

Q: How does the RX 7600 compare to its closest competitor in benchmark scores?

A: The AMD Radeon RX 7600 XT is 0.6% faster in average benchmark score, while the NVIDIA GeForce RTX 3070 Mobile is 1.3% slower. This indicates that the RX 7600 sits in a highly competitive performance tier.

Q: Does the CPU hold back the GPU at 1080p?

A: The data suggests it does not. The Ryzen 5 3600 has a single-thread score of 696 in 3DMark and a Cinebench R23 single-core score of 2124, which is sufficient to keep the GPU fed at lower resolutions. The FPS scaling from 1080p to 1440p is minimal, confirming the GPU is the limiting factor.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The following data represents the exact measured average frame rates for the AMD Ryzen 5 3600 and AMD Radeon RX 7600 in Overpower.

1920x1080 (1080p):

• Low: 129.1 FPS
• Medium: 79.4 FPS
• High: 74.6 FPS
• Ultra: 65.6 FPS

At 1080p, the frame rates are consistently above 60 FPS across all presets. The jump from Low to Medium is significant, a 49.7 FPS drop, indicating that Medium settings introduce a substantial graphical load. The delta between Medium and High is smaller (4.8 FPS), and the step to Ultra is another 9.0 FPS reduction. This shows that the GPU has headroom at 1080p, and the CPU is not the constraint.

2560x1440 (1440p):

• Low: 116.4 FPS
• Medium: 76.2 FPS
• High: 70.2 FPS
• Ultra: 55.8 FPS

At 1440p, the performance remains strong for most presets. Low settings still deliver over 100 FPS, but the more demanding presets show a clear decline. The drop from Low to Medium is 40.2 FPS, and the Ultra preset finally falls below 60 FPS, hitting 55.8 FPS. The difference between Medium and High is 6.0 FPS, while the gap between High and Ultra is 14.4 FPS, showing that Ultra is a significant step up in rendering cost.

3840x2160 (4K):

• Low: 100.1 FPS
• Medium: 63.1 FPS
• High: 54.5 FPS
• Ultra: 50.1 FPS

At 4K, the GPU is heavily taxed. Low settings still manage to exceed 100 FPS, but Medium drops to 63.1 FPS, and High falls below 60 FPS at 54.5 FPS. The Ultra preset yields 50.1 FPS, which is the lowest recorded average. The scaling from Medium to High is a 8.6 FPS drop, and from High to Ultra a 4.4 FPS drop, suggesting that the GPU is nearing its memory and compute limits.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 7600 is built on the RDNA 3.0 architecture with the Navi 33 chip. It features a base clock of 1720 MHz and a boost clock of 2655 MHz, with a game clock of 2250 MHz. These clocks are relatively high, and the FP32 performance of 21.75 TFLOPS provides substantial compute throughput. However, the memory configuration is a critical factor in Overpower’s performance. The 8 GB of GDDR6 memory is paired with a 128-bit bus, yielding a bandwidth of 288.0 GB/s.

The 4K results are directly tied to this memory subsystem. At 4K Ultra, the frame rate drops to 50.1 FPS, a figure that suggests the GPU is not only compute-limited but also potentially memory-bandwidth-limited. The 128-bit bus is a known constraint for higher resolutions, and the data supports this. The difference between 1440p Ultra (55.8 FPS) and 4K Ultra (50.1 FPS) is only 5.7 FPS, which is a smaller relative drop than the jump from 1080p Ultra (65.6 FPS) to 1440p Ultra (55.8 FPS), a 9.8 FPS drop. This pattern indicates that beyond 1440p, the GPU’s ability to feed the render pipeline with texture data becomes the primary limiter.

The GPU’s 32 RT cores and support for DirectX 12 Ultimate are present, but the measured data does not isolate ray tracing performance. The 8 GB VRAM capacity is sufficient for 1080p and 1440p at most settings, but at 4K, the capacity itself could be a factor if the game’s assets exceed 8 GB. The measured FPS at 4K Medium (63.1 FPS) is notably lower than 4K Low (100.1 FPS), indicating a steep increase in memory pressure when moving from minimal to standard textures.

The GPU’s average benchmark score is 20258, and its percentile versus all GPUs is 63. The data shows that the RX 7600 is a capable mid-range card, but its performance in Overpower is clearly gated by its memory interface at higher resolutions. The 288.0 GB/s bandwidth is a bottleneck at 4K, and users targeting that resolution would need to reduce settings to maintain playable frame rates. The combo’s overall rank of 1172 out of 1744 reflects these limitations, as the GPU’s strengths at 1080p and 1440p are offset by its struggles at 4K.