Outriders

Intel Core Ultra 5 245 and NVIDIA GeForce RTX 4060 offer a specific performance profile in Outriders. The data shows a system that handles 1080p and 1440p with ease but requires significant settings compromises for 4K. This analysis walks through the resolution scaling, CPU and GPU roles, and the measured frame rates to define what this combo delivers.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep, indicating that the GPU becomes the primary limiting factor at higher resolutions. At High settings, the average frame rate falls from 134 FPS at 1920x1080 to 84 FPS at 2560x1440, a 37% reduction. Moving to 3840x2160, the average drops further to 44 FPS, representing a 67% decline from the 1080p baseline. This scaling pattern is classic for a GPU-bound scenario, where the rendering load on the RTX 4060’s 8 GB of GDDR6 memory and 128-bit bus become the bottleneck.

Comparing Low settings across resolutions reveals the raw pixel throughput limits. At 1920x1080 Low, the combo produces 245 FPS, which falls to 155 FPS at 2560x1440 and 81 FPS at 3840x2160. The drop from 1440p to 4K at Low is a 48% reduction, showing that even with minimal graphical overhead, the GPU cannot sustain high frame rates at 4K. The data suggests that 4K is only viable if the user prioritizes visual fidelity over smoothness, as the High preset at 4K produces 44 FPS, which is below the 60 FPS target for many players.

The Medium preset provides the most complete data set, with min and max frame rates recorded. At 1920x1080 Medium, the average is 178 FPS, with a minimum of 152 and maximum of 205. At 2560x1440 Medium, the average is 112 FPS, with a minimum of 96 and maximum of 129. At 3840x2160 Medium, the average is 59 FPS, with a minimum of 50 and maximum of 68. This shows that even at Medium settings, 4K hovers near the edge of playability, while 1440p provides a comfortable margin above 90 FPS.

The Ultra preset tells a similar story. At 1080p, Ultra averages 97 FPS, which is still smooth. At 1440p, it drops to 61 FPS, which is acceptable but not ideal for high-refresh-rate monitors. At 4K, Ultra averages only 32 FPS, which is a poor experience for a looter shooter that requires fast reactions. The data indicates that this combo is best suited for 1080p and 1440p gaming, with 4K reserved for less demanding titles or significant settings compromises.

CPU Role

The Intel Core Ultra 5 245 provides substantial headroom for this game. With 14 cores and 14 threads, the CPU is unlikely to be the bottleneck at any resolution in Outriders. The processor’s performance metrics support this: its Cinebench R23 multi-core score is 32924, and its single-core score is 4648. These numbers indicate strong multi-threaded and single-threaded capabilities, which are relevant for a game that needs to handle physics, AI, and game logic alongside the rendering pipeline.

The CPU’s boost clock of 5.10 GHz and base clock of 3.50 GHz are sufficient for Outriders’ demands. The PassMark single-thread score of 4394 places it among faster processors for single-threaded tasks, which is crucial for game logic that cannot be fully parallelized. The data shows that as resolution increases and frame rates drop, the CPU’s role diminishes, as the GPU takes over as the limiting factor. At 1080p Low, where the GPU is less stressed, the CPU must work harder to feed frames, but the 245 FPS result shows it handles this without issue.

Comparing to its nearest rivals, the Core Ultra 5 245 is positioned well. Its average benchmark score is 48995, which is 0.4% lower than the AMD Ryzen 7 PRO 5755G and 0.5% lower than the AMD Ryzen 9 7900. It is 0.6% higher than the Intel Xeon Gold 5318H and 0.8% higher than the Intel Core i5-14600K. These small deltas mean the CPU is effectively at parity with its closest competitors, so any performance differences in Outriders are more attributable to the GPU or memory configuration than the processor itself.

The 24 MB of shared L3 cache is adequate for gaming workloads. The memory bandwidth of 102.4 GB/s, paired with dual-channel DDR5 support, ensures the CPU can feed data to the GPU without stalling. In Outriders, which features large environments and many enemies, the CPU’s cache hierarchy can influence frame pacing, but the measured frame rates suggest no major issues. The data indicates that the CPU is a stable foundation, leaving the GPU to determine the final output.

FAQ

Q: What is the average frame rate at 1920x1080 with Ultra settings?

A: The average frame rate is 97 FPS at 1920x1080 with Ultra settings.

Q: How does the combo perform at 4K with High settings?

A: At 3840x2160 with High settings, the average frame rate is 44 FPS, which is below the 60 FPS threshold for smooth play.

Q: What is the minimum frame rate recorded at 2560x1440 with Medium settings?

A: The minimum frame rate is 96 FPS at 2560x1440 with Medium settings.

Q: Is the CPU or GPU more likely to be the bottleneck at 4K?

A: The data shows the GPU is the bottleneck at 4K, as frame rates drop significantly regardless of CPU headroom.

Q: What is the maximum frame rate achieved at 1080p with Low settings?

A: The maximum frame rate is not recorded for Low settings, but the average is 245 FPS at 1920x1080 Low.

Q: How does the combo rank among all tested configurations in Outriders?

A: The combo ranks 1391 out of 2913 tested combinations, placing it in the upper half of the database.

How This Combo Ranks

The Intel Core Ultra 5 245 with NVIDIA GeForce RTX 4060 ranks 1391 out of 2913 tested combos in Outriders. This position places it in the 47.8th percentile, meaning it outperforms just under half of all tested systems. This is a mid-range ranking, which aligns with the hardware’s specifications. The RTX 4060’s average benchmark score is 17639, and it sits in the 61st percentile of all GPUs, while the CPU is in the 90th percentile of all CPUs. The combination of a high-ranking CPU and a mid-range GPU yields a system that is balanced for 1080p and 1440p gaming but struggles at 4K.

The ranking suggests that many combos with higher-end GPUs or more balanced pairings achieve better results. However, the data shows that this specific pairing is not an outlier; it performs as expected given the components. The CPU’s position among its rivals, with deltas to the nearest competitors ranging from -0.5% to 0.8%, means that swapping in a similar processor would not change the ranking significantly. The GPU’s rivals, such as the AMD Radeon 780M and AMD Radeon Pro 560, have average scores within 0.7% of the RTX 4060, indicating that the GPU is also in a tight performance band.

For Outriders specifically, the ranking reflects the game’s demands. The looter shooter genre often requires high frame rates for smooth combat, and the data shows that this combo can deliver at 1080p and 1440p. The 1391st position out of 2913 means there are many systems that can push higher frame rates, but this combo is far from the bottom. Users with high-refresh-rate 1080p monitors will find this ranking sufficient, while those with 4K displays will need to lower settings to achieve playable performance.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across resolutions and settings. At 1920x1080, the combo produces an average of 245 FPS at Low settings, 178 FPS at Medium, 134 FPS at High, and 97 FPS at Ultra. The Medium preset has a recorded minimum of 152 FPS and a maximum of 205 FPS, showing consistent frame delivery. At Low and High, only averages are recorded, but the numbers indicate that the GPU is not stressed at this resolution, allowing the CPU to drive high frame rates.

At 2560x1440, the averages are 155 FPS at Low, 112 FPS at Medium, 84 FPS at High, and 61 FPS at Ultra. The Medium preset shows a minimum of 96 FPS and a maximum of 129 FPS. This resolution is the sweet spot for this combo, as all settings except Ultra maintain averages above 80 FPS. The drop from Low to Ultra is significant, from 155 FPS to 61 FPS, which is a 61% reduction, but even the lowest average is playable.

At 3840x2160, the averages are 81 FPS at Low, 59 FPS at Medium, 44 FPS at High, and 32 FPS at Ultra. The Medium preset has a minimum of 50 FPS and a maximum of 68 FPS. This resolution clearly stresses the GPU. Low settings are the only preset that maintains an average above 60 FPS, and even that is close to the threshold. The data shows that 4K requires a significant compromise, with Ultra settings producing a stutter-prone experience.

The progression from Low to Ultra at each resolution shows a consistent pattern: the RTX 4060 loses approximately 40-50% of its performance moving from Low to Ultra. At 1080p, the difference is 148 FPS (from 245 to 97), at 1440p it is 94 FPS (from 155 to 61), and at 4K it is 49 FPS (from 81 to 32). The absolute drops are smaller at higher resolutions, but the percentage reduction remains similar, indicating that the GPU’s rendering pipeline is the limiting factor across all settings.

Settings Recommendations

The data suggests that the best experience for this combo is at 2560x1440 with High settings. This configuration produces an average of 84 FPS, which is smooth for most gameplay scenarios. The High preset offers a balance between visual quality and performance, as it does not sacrifice as much detail as Medium or Low while still maintaining a frame rate above 80 FPS. For users with 1440p monitors, this is the recommended setting.

For 1080p users, the Ultra preset is viable, with an average of 97 FPS. This provides the best visual quality without dropping below the 60 FPS threshold. However, for competitive play where higher frame rates are beneficial, the High preset at 134 FPS or even Medium at 178 FPS would be better choices. The data shows that at 1080p, even Ultra is playable, so the choice depends on whether the user prioritizes visuals or refresh rate.

For 4K users, the data recommends Low settings, which produce an average of 81 FPS. This is the only 4K preset that exceeds 60 FPS, and it does so by a wide margin. Medium settings at 59 FPS are borderline, and the minimum of 50 FPS may cause noticeable dips during intense combat. High and Ultra settings at 4K are not recommended, as they average 44 FPS and 32 FPS respectively, which are below playable thresholds for a fast-paced shooter.

The Medium preset offers the most consistent frame pacing, as it is the only preset with recorded minimum and maximum values at all resolutions. At 1080p, the minimum of 152 FPS ensures no drops below the refresh rate of most monitors. At 1440p, the minimum of 96 FPS is still high. At 4K, the minimum of 50 FPS is below 60, but the average of 59 FPS indicates that most of the gameplay is near the target. For users who want a stable experience without maximizing visuals, Medium is a safe choice.

GPU Role

The NVIDIA GeForce RTX 4060 is the primary driver of frame rates in Outriders, as evidenced by the resolution scaling data. The GPU’s 8 GB of GDDR6 memory with a 128-bit bus and 272.0 GB/s bandwidth is adequate for 1080p and 1440p but becomes a limiting factor at 4K. The boost clock of 2460 MHz and base clock of 1830 MHz provide the raw compute power needed, but the memory subsystem is the bottleneck at higher resolutions.

The GPU’s benchmark scores reflect its mid-range positioning. Its PassMark G3D score is 19545, and its average benchmark score is 17639. Its nearest rivals, the AMD Radeon HD 7790 and AMD Radeon 780M, have average scores within 0.3% of the RTX 4060, showing that the GPU is in a tight performance cluster. The GPU’s percentile rank of 61 means it outperforms 61% of all GPUs, which is respectable for a mainstream card.

In Outriders, the GPU’s 15.11 TFLOPS of FP32 compute and 24 RT cores are sufficient for the game’s DirectX 12 rendering. The GPU supports DirectX 12 Ultimate, which is the version Outriders uses, and the data shows that the card can handle the game’s visual effects at 1080p and 1440p. The 8 GB of VRAM is sufficient for the game at these resolutions, but at 4K, the memory capacity and bandwidth become strained, leading to the significant frame rate drops observed.

The GPU’s role is also evident in the settings scaling. Moving from Low to Ultra at any resolution increases the rendering load, and the frame rate drops proportionally. The data shows that the RTX 4060 has enough headroom to handle Ultra at 1080p but not at 4K. This is consistent with the GPU’s positioning as a 1080p and 1440p card, with 4K support limited to lower settings. The GPU’s 115 W TDP and dual-slot design are modest, but the performance is in line with expectations for this class of hardware.