Outriders

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 4060 lands at rank 854 out of 1,693 tested combos for Outriders, placing it squarely in the upper-middle tier of all hardware configurations. This ranking reflects a system that is capable of delivering high refresh rates at mainstream resolutions but begins to show its limits when pushed to 4K with maximum settings. The combination is not a top-tier enthusiast setup, but the data shows it is far from a bottlenecked pairing, with the CPU’s substantial thread count and the GPU’s modern architecture working in concert to produce playable results across most of the tested spectrum.

How This Combo Ranks

The combo’s position at 854 of 1,693 in Outriders indicates that roughly half of all tested systems perform better, but this statistic alone undersells the experience. The RTX 4060’s average benchmark score of 23,181 places it at the 66th percentile among all GPUs, while the i7-13700K sits at the 93rd percentile among CPUs. This gap suggests the graphics card is the limiting factor in this pairing, which is typical for a mid-range GPU matched with a high-end processor. In practical terms, the data shows the combo delivers over 60 FPS at 1440p on High settings and above 130 FPS at 1080p on High, which are strong results for a looter shooter that rewards smooth aiming and fast reaction times.

Comparatively, the RTX 4060’s nearest rivals are the AMD Radeon RX 6600M, which scores 23,321 and is 0.6% faster, and the NVIDIA GeForce GTX 780 Ti, which scores 23,338 and is 0.7% faster. On the other side, the Intel Arc B580 trails by 0.7% with a score of 23,021, and the AMD Radeon 760M is 0.8% behind at 22,999. This clustering means the RTX 4060 is effectively performance-identical to several other cards in synthetic benchmarks, but the measured FPS in Outriders shows the real-world impact of its 8 GB GDDR6 memory and 272.0 GB/s bandwidth. For the CPU, the i7-13700K’s nearest rival is the i7-13700KF, which is only 0.1% faster, making the pair functionally interchangeable in gaming workloads.

FAQ

Q: What is the best resolution for this combo in Outriders?

A: The data shows 1080p is the sweet spot, with High settings yielding 131.1 FPS and Low settings hitting 246.1 FPS, while 1440p High still produces a solid 86.8 FPS.

Q: Can this combo handle 4K gaming in Outriders?

A: Yes, but only at lower presets. The measured results show 83.2 FPS at 4K Low, but this drops to 45.7 FPS at High and just 30.7 FPS at Ultra, which is below the threshold for comfortable play.

Q: Is the CPU or GPU the bottleneck in this system?

A: Benchmark data indicates the GPU is the limiting component, as the i7-13700K ranks at the 93rd percentile among CPUs while the RTX 4060 sits at the 66th percentile among GPUs, and the FPS scaling with resolution changes confirms this.

Q: How does this combo compare to the RTX 4060’s nearest rivals?

A: The RTX 4060’s average score of 23,181 is within 0.8% of the AMD Radeon RX 6600M, GTX 780 Ti, Intel Arc B580, and Radeon 760M, so performance is essentially tied in synthetic tests.

Q: What are the CPU’s core and clock specifications?

A: The i7-13700K has 16 cores and 24 threads with a base clock of 3.40 GHz and a boost clock of 5.40 GHz, which contributes to its strong synthetic scores like 39,000 in Cinebench R23 multi-core.

Q: What is the GPU’s memory configuration?

A: The RTX 4060 comes with 8 GB of GDDR6 memory on a 128-bit bus, providing 272.0 GB/s of bandwidth, which is sufficient for 1080p and 1440p but limits 4K Ultra performance.

Settings Recommendations

The measured FPS data provides a clear hierarchy for settings optimization in Outriders. For 1080p, High settings at 131.1 FPS offer the best balance of visual fidelity and performance, as the jump to Medium at 175.9 FPS is noticeable but not necessary for most displays with a 144Hz refresh rate. Ultra at 95.6 FPS is still playable, but the visual gain over High is typically marginal in a fast-paced looter shooter. At 1440p, High settings at 86.8 FPS are the recommended choice, as this keeps the frame rate above the 60 FPS threshold while maintaining image quality. Medium at 114.2 FPS is a viable alternative for players prioritizing higher refresh rates, but Ultra at 60.4 FPS is right at the edge of playability and may cause stutters in heavy combat.

For 4K, the data suggests sticking to Low settings at 83.2 FPS, as Medium drops to 59.1 FPS and High falls to 45.7 FPS. The jump from Low to Medium at 4K does not justify the 24.1 FPS loss, so players with 4K displays should either accept Low settings or drop the resolution to 1440p for a better experience. The Ultra preset is not recommended at any resolution above 1080p, as it produces 60.4 FPS at 1440p and 30.7 FPS at 4K, both of which are suboptimal for a game that requires quick aiming. Overall, the best experience is achieved with High settings at 1080p or 1440p, depending on the display’s native resolution.

Measured FPS Breakdown

At 1920x1080, the combo shows a wide performance range across presets. Low settings produce 246.1 FPS, which is the highest measured result in the entire dataset and indicates a CPU-bound scenario where the GPU has ample headroom. Medium settings drop to 175.9 FPS, High yields 131.1 FPS, and Ultra falls to 95.6 FPS. The scaling from Low to Ultra at 1080p is a 150.5 FPS difference, demonstrating that the RTX 4060’s compute resources are heavily taxed by higher graphical demands. Moving to 2560x1440, the numbers are 153.8 FPS on Low, 114.2 FPS on Medium, 86.8 FPS on High, and 60.4 FPS on Ultra. The 1440p results show a more linear progression, with each preset tier costing roughly 25-28 FPS.

At 3840x2160, the GPU clearly becomes the bottleneck. Low settings manage 83.2 FPS, Medium drops to 59.1 FPS, High falls to 45.7 FPS, and Ultra bottoms out at 30.7 FPS. The difference between 1080p Low and 4K Low is 162.9 FPS, which is a massive reduction that highlights the GPU’s limited memory bandwidth. The 8 GB VRAM and 128-bit bus are sufficient for 1080p and 1440p, but 4K Ultra likely exceeds the memory capacity and causes the significant drop to 30.7 FPS. The data shows that this combo is best suited for 1080p and 1440p gaming, with 4K only viable on the lowest preset.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic across all settings, indicating that the RTX 4060 is the primary limiting factor. On Low settings, the transition from 1080p to 1440p reduces FPS from 246.1 to 153.8, a 92.3 FPS loss, and then further to 83.2 at 4K, another 70.6 FPS loss. This scaling pattern is consistent with a GPU that has a moderate amount of shading units and texture units, as the 3072 shading units and 96 texture mapping units struggle to fill 4K pixels. On High settings, the drop from 131.1 FPS at 1080p to 86.8 FPS at 1440p is 44.3 FPS, and then to 45.7 FPS at 4K is another 41.1 FPS loss. The percentage drop from 1080p to 4K on High is roughly 65%, which is expected for a mid-range GPU.

The CPU’s role in this scaling is less significant. The i7-13700K’s high single-thread performance, evidenced by a Geekbench single-core score of 2,850 and a 3DMark single-thread score of 1,136, ensures that the processor is not the bottleneck even at 1080p Low where the GPU is underutilized. The fact that 1080p Low produces 246.1 FPS suggests the CPU can feed the GPU at very high frame rates, but the GPU’s rendering limits kick in as resolution increases. This analysis indicates that players seeking higher FPS at 4K would need a stronger GPU, while the CPU has headroom to support future GPU upgrades in this game.

CPU Role

The Intel Core i7-13700K is a 16-core, 24-thread processor based on Raptor Lake architecture, manufactured on Intel’s 10 nm process. Its base clock of 3.40 GHz and boost clock of 5.40 GHz contribute to strong multi-threaded and single-threaded performance, as shown by a Cinebench R23 multi-core score of 39,000 and a single-core score of 5,505. In Outriders, a looter shooter that relies on physics simulations and enemy AI, the CPU’s thread count is beneficial for maintaining consistent frame pacing. The 30 MB of shared L3 cache and 2 MB per-core L2 cache help reduce memory latency, which is critical for the game’s real-time combat scenarios.

The benchmark percentile of 93% versus all CPUs indicates that the i7-13700K is in the top tier of processors, and its nearest rival, the Intel Core i7-13700KF, is only 0.1% faster, making the performance difference negligible. In the measured FPS data, the CPU’s influence is most apparent at 1080p Low, where the 246.1 FPS result suggests the processor can handle the game’s logic at extremely high frame rates. However, as resolution increases, the GPU’s workload grows, and the CPU’s advantage becomes less relevant. The 16 cores and 24 threads are more than sufficient for Outriders, which typically uses fewer than 8 threads, meaning the CPU is never the limiting factor in this pairing.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with a 5 nm process from TSMC, featuring 18,900 million transistors on a 159 mm² die. Its 8 GB of GDDR6 memory on a 128-bit bus provides 272.0 GB/s of bandwidth, which is a modest figure for a modern GPU. The core clocks are 1,830 MHz base and 2,460 MHz boost, delivering 15.11 TFLOPS of FP32 performance. The GPU’s 24 RT cores and 96 tensor cores support ray tracing and DLSS, though the measured FPS data does not include ray-traced results. The passmark G3D score of 19,545 places it at the 66th percentile among all GPUs, indicating it is a mid-range performer.

In Outriders, the GPU’s role is crucial at higher resolutions and settings. The 4K Ultra result of 30.7 FPS is a clear sign that the 8 GB VRAM and 128-bit bus are insufficient for the game’s highest visual demands, likely causing texture swapping and memory pressure. At 1080p and 1440p, the GPU performs admirably, with High settings providing 131.1 FPS and 86.8 FPS respectively. The GPU’s nearest rivals, including the AMD Radeon RX 6600M and Intel Arc B580, show similar synthetic scores, but the RTX 4060’s advantage in driver optimization and feature set may give it a slight edge in real-world gaming. The 115 W TDP and 300 W suggested PSU indicate this is an efficient card, and the measured FPS data supports its positioning as a solid choice for 1080p high-refresh and 1440p 60 FPS gaming.