Outriders

The AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3070 combination delivers a highly playable experience in Outriders, but the data reveals a clear performance hierarchy tied to resolution. At 1920x1080, the system produces high frame rates across all settings, with the CPU and GPU working in concert. Moving to 2560x1440, performance remains strong, while 3840x2160 presents the most demanding scenario, where the GPU becomes the dominant limiting factor. The benchmark results show a consistent scaling pattern that highlights the balance between the 8-core processor and the 8 GB graphics card.

Resolution Scaling

The frame rate data shows a predictable decline as resolution increases, but the magnitude of the drop varies significantly by settings preset. At Low settings, moving from 1920x1080 to 2560x1440 reduces the average FPS from 218 to 175, a decrease of 43 FPS or roughly 19.7%. Continuing to 3840x2160, the average drops further to 92 FPS, representing another 83 FPS loss. This steep decline at Low settings indicates that the GPU is handling a much larger pixel workload, with the CPU having ample headroom to feed frames.

For Medium settings, the scaling is more moderate. The system achieves 194 FPS at 1080p, 128 FPS at 1440p, and 67 FPS at 4K. The drop from 1080p to 1440p is 66 FPS, while the drop from 1440p to 4K is 61 FPS. This suggests that at Medium settings, both the CPU and GPU are more evenly matched, with the graphics card still managing the increased resolution load effectively. The minimum FPS data at Medium settings shows 165 at 1080p, 108 at 1440p, and 57 at 4K, indicating that frame pacing remains stable even as resolution increases.

High settings present a similar pattern to Medium, but with lower absolute numbers. The average FPS goes from 152 at 1080p to 96 at 1440p, then to 50 at 4K. The percentage drops are larger here: a 36.8% reduction from 1080p to 1440p, and a 47.9% reduction from 1440p to 4K. This increasing percentage loss at higher resolutions points to the GPU being progressively more stressed. Ultra settings show the most dramatic scaling, with 109 FPS at 1080p, 69 FPS at 1440p, and just 36 FPS at 4K. The 4K Ultra result is below the 60 FPS threshold, indicating that this combination is not suitable for maximum quality at that resolution.

The data suggests that the RTX 3070 is the primary limiting component at 4K, as the frame rate differences between settings become more pronounced. At 1080p, the CPU's 8 cores and 16 threads are likely providing sufficient throughput, as evidenced by the high frame rates even at Low settings. The scaling behavior confirms that Outriders is largely GPU-bound at higher resolutions, with the 8 GB VRAM and 448.0 GB/s memory bandwidth playing a crucial role in maintaining playable performance.

FAQ

Q: What is the best resolution for this CPU and GPU combination in Outriders?

A: The data shows 2560x1440 as the sweet spot. At High settings, the system averages 96 FPS, which is well above the 60 FPS target, and even Ultra settings maintain 69 FPS. This resolution provides a good balance between visual fidelity and performance, avoiding the steep drop-off seen at 4K.

Q: How does the RTX 3070 perform at 4K Ultra settings?

A: The benchmark shows an average of 36 FPS at 3840x2160 with Ultra settings. This is below the standard 60 FPS threshold, indicating that this combination is not ideal for 4K gaming at maximum quality. Players would need to reduce settings to High (50 FPS) or Medium (67 FPS) for a smoother experience.

Q: Is the Ryzen 7 5800XT a bottleneck at 1080p?

A: Based on the frame rates at 1920x1080, the CPU appears sufficient. At Low settings, the system achieves 218 FPS, and at Medium it reaches 194 FPS. These high numbers suggest the CPU is not limiting performance at this resolution, allowing the GPU to work at its full potential.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: The average FPS at 2560x1440 ranges from 175 at Low to 69 at Ultra. This represents a 106 FPS difference, or roughly a 60.6% reduction in performance when moving from the lowest to the highest quality preset. The trade-off is significant, with Ultra providing better visuals at a substantial cost to frame rate.

Q: Does the 8 GB VRAM cause issues at 4K?

A: While the data does not directly measure VRAM usage, the performance drop at 3840x2160 suggests the 8 GB memory may be a contributing factor. The RTX 3070 has a 256-bit memory bus and 448.0 GB/s bandwidth, but the high-resolution textures likely push the memory capacity. The result is a noticeable frame rate reduction, particularly at Ultra settings where the average drops to 36 FPS.

Q: How does the combo rank relative to other tested systems?

A: The combination ranks 1413 out of 3710 tested combos, placing it in the top 38.1% of all systems. This indicates that it performs better than the majority of configurations, though it is not at the very top tier. The rank reflects a balanced setup that handles most resolutions well, with limitations only at 4K Ultra.

GPU Role

The NVIDIA GeForce RTX 3070 is the central component in determining Outriders' performance, particularly at higher resolutions. This GPU features 5888 shading units, 184 texture mapping units, and 96 raster output units, all built on the Ampere architecture with an 8 nm process. Its boost clock of 1725 MHz and base clock of 1500 MHz provide the computational throughput needed for demanding scenes. The memory subsystem consists of 8 GB of GDDR6 on a 256-bit bus, delivering 448.0 GB/s of bandwidth, which is critical for loading textures and geometry at 4K resolution.

The GPU's benchmark results show a Passmark G3D score of 22214 and a Passmark GPU Compute score of 11195, placing it in the 61st percentile among all GPUs. Its nearest rivals include the AMD Radeon RX 7600 XT (with a deltaPct of 0.7%), the NVIDIA GeForce GTX 690 (1.0%), and the AMD Radeon HD 7970M (1.1%). These comparisons suggest the RTX 3070 is competitive with modern mid-range cards, though it is not a top-tier performer. The GPU's average benchmark score of 17208 further confirms its position in the market.

In Outriders, the GPU's role becomes more evident as resolution increases. At 1080p, the card can push frame rates well above 200 FPS at Low settings, showing that it is not the limiting factor. However, at 4K, the average FPS drops to 92 at Low, 67 at Medium, and 50 at High, with Ultra falling to 36 FPS. This pattern indicates that the 8 GB VRAM and memory bandwidth are being taxed heavily at 3840x2160. The 14 Gbps effective memory speed helps, but the capacity becomes a constraint with higher quality textures.

The data also shows that the RTX 3070's performance scales predictably with settings. The difference between Low and Ultra at each resolution is substantial: 109 FPS at 1080p (218 vs 109), 106 FPS at 1440p (175 vs 69), and 56 FPS at 4K (92 vs 36). This scaling suggests that the GPU has enough compute power to handle the game at lower settings, but the memory and bandwidth limitations become apparent at maximum quality. The card's 20.31 TFLOPS FP32 performance is adequate for most scenarios, yet the 4K Ultra result shows the hardware is stretched beyond its comfortable operating range.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings produce an average of 218 FPS, Medium settings achieve 194 FPS with a minimum of 165 and maximum of 223, High settings average 152 FPS, and Ultra settings maintain 109 FPS. These numbers indicate that the combination is highly capable at Full HD, with even the most demanding preset exceeding 100 FPS. The 24 FPS difference between Low and Medium is modest, while the jump to High costs 42 FPS, and Ultra reduces performance by another 43 FPS.

Moving to 2560x1440, the frame rates remain strong but show a clear step down. Low settings average 175 FPS, Medium settings drop to 128 FPS (minimum 108, maximum 147), High settings reach 96 FPS, and Ultra settings fall to 69 FPS. The gap between Low and Medium is 47 FPS, while High and Ultra are separated by 27 FPS. The minimum FPS at Medium settings of 108 suggests that even the lowest frame times are well above playable thresholds. This resolution offers a good balance, with High settings providing a smooth 96 FPS experience.

At 3840x2160, performance becomes more variable. Low settings average 92 FPS, which is still playable, but Medium settings drop to 67 FPS (minimum 57, maximum 77), High settings fall to 50 FPS, and Ultra settings plummet to 36 FPS. The 4K results show a significant performance penalty, with the difference between Low and Ultra being 56 FPS. The minimum FPS at Medium settings of 57 is just below the 60 FPS target, indicating that frame pacing can suffer during intense scenes. High and Ultra settings at 4K are not recommended for a smooth experience, as the average frame rates are too low for fast-paced action.

The data reveals a consistent pattern: the system excels at 1080p and 1440p, but struggles at 4K with higher quality presets. The measured FPS values show that the RTX 3070 is the primary bottleneck at 4K, with the CPU's performance becoming less relevant as resolution increases. The medium settings at 1440p offer a good middle ground, providing 128 FPS average with a reasonable minimum of 108 FPS.

How This Combo Ranks

The combination of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3070 ranks 1413 out of 3710 tested combos in Outriders. This places the system in the top 38.1% of all configurations, indicating that it outperforms the majority of systems tested. The rank reflects a balanced setup that handles most gaming scenarios well, though it does not reach the top tier of performance.

This ranking is consistent with the individual component benchmarks. The CPU has an average benchmark score of 29879 and is in the 81st percentile among all CPUs, while the GPU has an average score of 17208 and is in the 61st percentile. The CPU's higher percentile suggests it is a stronger component relative to its peers, which helps maintain high frame rates at lower resolutions where the processor matters more. The GPU's lower percentile explains the performance drop at 4K, where its limitations become apparent.

The combo's rank of 1413 indicates that there are 1412 systems that perform better, likely featuring higher-end GPUs or newer CPU models. However, the combination still outperforms 2297 other tested configurations. The data shows that this setup is well-suited for 1080p and 1440p gaming, with performance that is competitive with many modern systems. The rank also suggests that the RTX 3070, despite being an older card, still holds its own in this game, particularly when paired with a capable 8-core processor.

The deltaPct values for the CPU's nearest rivals show minimal performance differences, with the Ryzen 7 7840H matching the 5800XT's average score, and the Ryzen 5 9600X being 0.6% ahead. This indicates that the CPU is not a significant differentiator in this combo's ranking. The GPU's nearest rivals, such as the RX 7600 XT (0.7% ahead), show that the RTX 3070 is closely matched with modern alternatives, reinforcing its position in the ranking.

CPU Role

The AMD Ryzen 7 5800XT is a significant contributor to the system's performance in Outriders, particularly at lower resolutions. This 8-core, 16-thread processor is based on the Zen 3 architecture and is manufactured on a 7 nm process by TSMC. It has a base clock of 3.80 GHz and a boost clock of 4.80 GHz, with a TDP of 105 W. The CPU features 32 MB of shared L3 cache and supports DDR4 memory in a dual-channel configuration, providing 51.2 GB/s of memory bandwidth.

The CPU's benchmark results demonstrate its capabilities. It scores 23794 in Cinebench R23 multicore and 3359 in single-core, with a 3DMark max threads score of 7680. In Passmark tests, it achieves a multithread score of 28053 and a single thread score of 3535. These numbers place the CPU in the 81st percentile among all CPUs, with an average benchmark score of 29879. Its nearest rivals include the AMD Ryzen 7 7840H (deltaPct of 0%), the AMD Ryzen 7 8845HS (-0.3%), and the AMD Ryzen 5 9600X (0.6%), showing that the 5800XT is competitive with newer mobile and desktop processors.

In Outriders, the CPU's role is most evident at 1080p resolution. The high frame rates at Low settings (218 FPS) and even Ultra settings (109 FPS) indicate that the processor is not a bottleneck at this resolution. The 8 cores and 16 threads provide sufficient parallelism for the game's engine, allowing the GPU to operate at full capacity. The CPU's single-thread performance, as shown by the Cinebench R23 score of 3359, is also important for maintaining consistent frame times.

At 1440p, the CPU's influence diminishes slightly as the GPU takes on more of the workload. However, the frame rates remain high, with Low settings averaging 175 FPS and Ultra settings at 69 FPS. The CPU's performance is still sufficient to feed the GPU, as evidenced by the lack of a significant drop in performance relative to 1080p. At 4K, the CPU's role becomes minimal, as the GPU is clearly the limiting factor. The frame rates at 4K are much lower across all settings, indicating that the processor has ample headroom to handle the game's logic and physics calculations.

The CPU's memory support and cache configuration also play a role in the game's performance. The 32 MB L3 cache helps reduce memory latency, which is beneficial for game workloads that frequently access data. The DDR4 memory support with 51.2 GB/s bandwidth is adequate for the game's requirements. The CPU's PCIe Gen 4 support with 20 lanes ensures that the GPU can communicate at full speed, minimizing any potential interface bottlenecks.

Settings Recommendations

The measured FPS data provides clear guidance for optimizing the Outriders experience with this hardware. For players targeting 60 FPS or higher, the best settings depend on the resolution. At 1920x1080, all settings presets deliver above 100 FPS on average, with Ultra settings providing the best visual quality at 109 FPS. This makes 1080p Ultra the recommended choice for maximum fidelity without sacrificing smoothness.

For 2560x1440, the High settings preset is the optimal balance. It achieves an average of 96 FPS, which is well above the 60 FPS threshold, while providing significantly better visuals than Medium (128 FPS) or Low (175 FPS). The Ultra preset at 1440p averages 69 FPS, which is still playable but offers diminishing returns in visual quality for the 27 FPS performance loss compared to High. Players prioritizing higher frame rates could use Medium settings, which deliver 128 FPS and a minimum of 108 FPS.

At 3840x2160, the recommendation is more nuanced. The Medium settings preset averages 67 FPS, which is just above the 60 FPS target, but the minimum FPS of 57 suggests occasional dips below 60. For a consistently smooth experience, Low settings at 92 FPS is the safest choice. High settings at 50 FPS and Ultra at 36 FPS are not recommended for competitive or fast-paced gameplay, as the frame rates are too low. The data indicates that 4K gaming is possible with this combo, but it requires accepting lower quality settings to maintain acceptable performance.

The overall recommendation is to use 1440p High settings for the best combination of visual quality and performance. This preset provides a 96 FPS average, which is smooth for most players, and the minimum FPS is not reported, but the average suggests stable performance. For players with 1080p monitors, Ultra settings are the clear choice, as they deliver 109 FPS without any compromises. The data shows that this system is versatile, capable of handling Outriders across a range of resolutions and settings, with the only significant limitation being 4K Ultra.