Outriders

Outriders

AVERAGE FPS
98
good

This combination provides smooth gameplay with an average of 98 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 41 55 75
1440p QHD 57 78 104 144
1080p Full HD 90 124 165 218

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 75
3840x2160 Medium 55
3840x2160 High 41
3840x2160 Ultra 30
2560x1440 Low 144
2560x1440 Medium 104
2560x1440 High 78
2560x1440 Ultra 57
1920x1080 Low 218
1920x1080 Medium 165
1920x1080 High 124
1920x1080 Ultra 90

Outriders with AMD Ryzen 7 5800XT + AMD Radeon RX 9060, In-Depth Analysis

The AMD Ryzen 7 5800XT paired with the AMD Radeon RX 9060 delivers a mid-range experience in Outriders, a looter shooter that scales predictably across resolutions and presets. The measured data shows a combination that is capable at 1080p and 1440p but struggles to maintain playable frame rates at 4K on higher settings. This analysis breaks down the resolution scaling, ranking position, and the specific roles of the CPU and GPU in shaping the final numbers.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent, revealing a GPU-bound scenario at higher resolutions. At Low settings, the average frame rate falls from 218 FPS at 1920x1080 to 144 FPS at 2560x1440, then to 75 FPS at 3840x2160. That is a 34% reduction moving from 1080p to 1440p, and a further 48% reduction from 1440p to 4K. The pattern indicates that the RX 9060’s rendering throughput is the limiting factor as pixel count increases.

At Medium settings, the same trend holds: 165 FPS at 1080p, 104 FPS at 1440p, and 55 FPS at 4K. The drops are proportionally similar to Low, suggesting that the GPU’s fill rate and shading capacity are being saturated rather than any CPU bottleneck. At High settings, the numbers are 124 FPS, 78 FPS, and 41 FPS respectively. The gap between 1080p and 1440p widens slightly, but the 4K figure falls below the 60 FPS threshold, making that resolution impractical for smooth gameplay on High.

Ultra settings amplify the issue. The average at 1080p is 90 FPS, dropping to 57 FPS at 1440p and just 30 FPS at 4K. The 4K Ultra result is half the 1080p Ultra frame rate, which is a clear sign that the GPU is overwhelmed by the combination of high resolution and maximum graphical features. The data shows no evidence of a CPU limitation in these scaling tests; if the CPU were the bottleneck, the FPS would remain flat across resolutions, but instead it falls sharply, confirming that the RX 9060 is the primary constraint.

The scaling curve also indicates that the 8 GB VRAM on the GPU may be a factor at 4K, though the measured FPS alone does not isolate memory capacity from raw compute. The fact that even Low settings at 4K only reach 75 FPS, while 1080p Low hits 218 FPS, suggests that memory bandwidth and the 128-bit bus are struggling with the higher pixel throughput. The GPU’s 288.0 GB/s bandwidth is modest for 4K workloads, and the data reflects that limitation.

How This Combo Ranks

The combination of the Ryzen 7 5800XT and the RX 9060 ranks 2118 out of 3710 tested combos in Outriders, placing it in the lower-middle portion of the database. That rank of 2118 means roughly 57% of tested combinations perform better in this specific game, while 43% perform worse. The percentile position is not flattering, but it is consistent with the GPU’s overall standing: the RX 9060 sits at the 59th percentile among all GPUs, while the CPU sits at the 81st percentile. The combo rank is dragged down by the GPU, which is the weaker component in this pairing.

Looking at the GPU’s nearest rivals clarifies the situation. The RX 9060 has an average benchmark score of 16014, which is 0.7% lower than the NVIDIA GeForce RTX 3060 Ti (score 16129). It is 1% higher than the AMD Radeon R9 370X (score 15862) and 1% higher than the AMD Radeon RX 7700 (score 15852). The RX 9060 also sits 2.1% above the AMD Radeon Pro W5500 (score 15679). These small deltas mean that in Outriders, the combo’s performance will be effectively indistinguishable from those rival GPU pairings, barring other system differences.

For the CPU, the Ryzen 7 5800XT has an average benchmark score of 29879, which is essentially tied with the AMD Ryzen 7 7840H (score 29868, delta 0%). It is 0.3% lower than the AMD Ryzen 7 8845HS and the AMD Ryzen 7 7840HS (both score 29955), and 0.6% higher than the AMD Ryzen 5 9600X (score 29713). Since the CPU percentile is high and the GPU percentile is moderate, the combo rank reflects the GPU’s mid-tier position. In a game like Outriders, where resolution scaling shows a GPU bottleneck, the CPU’s high rank does not translate into a high combo rank because the frame rate is capped by the graphics card.

The rank of 2118 out of 3710 is a useful benchmark for potential buyers: this combo will handle 1080p and 1440p well, but it is not a top-tier performer for high-refresh 4K gaming. The data shows that the limiting factor is clearly the RX 9060, not the 5800XT.

FAQ

Q: What is the best resolution for this combo in Outriders?

A: The measured data shows the strongest results at 1920x1080, where even Ultra settings achieve 90 FPS average. At 2560x1440, High settings reach 78 FPS, which is playable, but 3840x2160 only exceeds 60 FPS on Low settings (75 FPS), making 4K viable only for lower presets.

Q: How does the RX 9060 compare to its nearest rival, the RTX 3060 Ti?

A: The RX 9060 has an average benchmark score of 16014, which is 0.7% lower than the RTX 3060 Ti’s score of 16129. In practical terms, the two GPUs are nearly identical in performance, so the FPS numbers in Outriders would be similar with either card.

Q: Is the Ryzen 7 5800XT a bottleneck for the RX 9060 in this game?

A: No. The resolution scaling data shows FPS dropping consistently from 1080p to 4K, which indicates a GPU bottleneck. The CPU’s 8 cores and 16 threads are more than sufficient for Outriders, as evidenced by the CPU’s 81st percentile ranking among all CPUs.

Q: What preset should I use for 1440p gaming?

A: At 2560x1440, Medium settings deliver 104 FPS average with a minimum of 89 FPS, while High settings drop to 78 FPS. For a smoother experience with fewer frame dips, Medium is the better choice, as the minimum FPS stays above 60.

Q: Can this combo handle 4K at all?

A: Yes, but only at Low settings, where the average FPS is 75. Medium settings at 4K drop to 55 FPS, and High falls to 41 FPS, which is below the 60 FPS target for most gamers. Ultra at 4K is not recommended, as it averages just 30 FPS.

Q: How does the combo rank compare to other tested systems?

A: This combo ranks 2118 out of 3710 tested combinations in Outriders. That places it in the lower-middle range, meaning about 57% of tested combos perform better, while 43% perform worse.

Settings Recommendations

Based on the measured FPS rows, the optimal settings depend on the target resolution. At 1920x1080, the data shows that High settings provide 124 FPS average, which is smooth for most displays. Medium settings push that to 165 FPS, and Low reaches 218 FPS. For competitive play or high-refresh monitors, Low or Medium are better, but for visual quality with still-solid frame rates, High is the sweet spot. Ultra at 1080p yields 90 FPS, which is acceptable but offers diminishing returns over High given the performance cost.

At 2560x1440, the choice narrows. Medium settings deliver 104 FPS average with a minimum of 89 FPS, which keeps the experience fluid. High settings drop to 78 FPS, which is playable but leaves less headroom for demanding scenes. Low settings hit 144 FPS, which is excellent for 144Hz monitors, but the visual trade-off is significant. Given the data, Medium is the recommended preset for 1440p because it balances frame rate stability (min 89 FPS) with visual fidelity. Ultra at 1440p falls to 57 FPS, which is below the 60 FPS threshold and should be avoided.

At 3840x2160, the options are limited. Low settings achieve 75 FPS average, which is the only preset that clears 60 FPS. Medium drops to 55 FPS, High to 41 FPS, and Ultra to 30 FPS. For 4K gaming, Low is the only viable preset, and even then, the minimum FPS is not recorded, so there is some risk of dips. The data suggests that this combo is not well-suited for 4K beyond the lowest settings, and users with 4K displays should consider lowering resolution or upgrading the GPU.

The best overall experience per the measured rows is at 1920x1080 with High settings: 124 FPS average, which is well above playable thresholds and retains good visual quality. For users prioritizing frame rate over visuals, 1080p Low at 218 FPS is the maximum performance the combo can deliver. In all cases, the data shows that Medium settings provide the most consistent frame pacing, as evidenced by the recorded minimum FPS values of 89 at 1440p and 141 at 1080p.

Measured FPS Breakdown

The measured data covers four presets (Low, Medium, High, Ultra) across three resolutions. At 1920x1080, the average FPS values are as follows: Low 218, Medium 165 (with a minimum of 141 and maximum of 190), High 124, and Ultra 90. The Medium preset is the only one with recorded min/max values, showing a spread of 49 FPS between the lowest and highest frames. This indicates moderate frame pacing variance at that setting.

At 2560x1440, the averages are: Low 144, Medium 104 (min 89, max 120), High 78, and Ultra 57. The Medium preset’s max of 120 FPS and min of 89 FPS show a 31 FPS range, which is tighter than at 1080p. This suggests that the GPU is working harder at 1440p, but the frame delivery remains consistent. The jump from Medium to High is a 26 FPS drop, while the drop from High to Ultra is 21 FPS, indicating that each preset tier has a significant cost.

At 3840x2160, the averages are: Low 75, Medium 55 (min 46, max 63), High 41, and Ultra 30. The Medium preset’s min of 46 FPS is notable, as it falls below the 60 FPS threshold, meaning there are moments of noticeable stutter even on a preset that averages 55 FPS. The Ultra preset at 30 FPS is at the edge of playability, and the data shows that 4K is only truly smooth on Low settings.

Comparing across resolutions, the same preset shows consistent scaling. For example, High settings go from 124 FPS at 1080p to 78 FPS at 1440p (a 37% drop) to 41 FPS at 4K (a 47% drop from 1440p). Low settings go from 218 to 144 to 75, with similar percentage drops. This uniformity confirms that the GPU is the limiting factor at all resolutions, and there is no CPU-induced plateau.

The minimum FPS data, available only for Medium settings, shows that 1080p Medium has a min of 141 FPS, 1440p Medium has a min of 89 FPS, and 4K Medium has a min of 46 FPS. These minimums are critical for understanding real-world smoothness. At 1440p, the min of 89 FPS is comfortable for most users, but at 4K, the min of 46 FPS would be noticeable during intense combat scenes. The maximum FPS values follow the same trend: 190 at 1080p, 120 at 1440p, and 63 at 4K.

CPU Role

The AMD Ryzen 7 5800XT is an 8-core, 16-thread processor based on the Zen 3 architecture, with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. It has 32 MB of shared L3 cache and supports DDR4 memory with a dual-channel bus. The CPU’s benchmark scores are strong: a Cinebench R23 multi-core score of 23794 and a single-core score of 3359, along with a 3DMark 16-thread score of 7683. These numbers place the CPU at the 81st percentile among all CPUs, indicating that it is well above average for gaming workloads.

In Outriders, the CPU’s role is to feed the GPU with draw calls and game logic. The resolution scaling data shows that the FPS drops uniformly as resolution increases, which would not happen if the CPU were the bottleneck. If the CPU were limiting, the FPS would stay roughly constant across resolutions because the CPU workload does not scale with pixel count. Instead, the FPS drops from 218 at 1080p Low to 75 at 4K Low, proving that the GPU is the constraint.

The 8 cores and 16 threads are more than sufficient for a looter shooter like Outriders, which typically uses fewer than 8 threads. The CPU’s single-thread performance, as measured by a 3DMark single-thread score of 959 and a Cinebench R23 single-core score of 3359, is also strong, ensuring that the main game thread does not become a limiting factor. The CPU’s 105 W TDP and 7 nm process node are not directly relevant to game performance, but they indicate that the processor runs efficiently under load.

The nearest CPU rivals, such as the AMD Ryzen 7 7840H (average score 29868) and the AMD Ryzen 5 9600X (score 29713), have nearly identical average benchmark scores, with deltas of 0% and 0.6% respectively. This means that swapping the 5800XT for any of those CPUs would not change the FPS in Outriders, as the GPU would still be the limiting factor. The data supports the conclusion that the CPU is not a bottleneck in this combo.

GPU Role

The AMD Radeon RX 9060 is a mid-range GPU based on the RDNA 4.0 architecture, with a boost clock of 2990 MHz and a game clock of 2400 MHz. It has 8 GB of GDDR6 memory on a 128-bit bus, providing 288.0 GB/s of bandwidth. The GPU’s compute power is rated at 21.43 TFLOPS for FP32, with 1792 shading units and 64 ROPs. These specifications position the GPU at the 59th percentile among all GPUs, with an average benchmark score of 16014.

In Outriders, the GPU’s performance is the primary driver of the measured FPS. The 8 GB VRAM is sufficient for 1080p and 1440p at most settings, but at 4K, the memory capacity and bandwidth become limiting. The 128-bit bus and 288.0 GB/s bandwidth are modest for 4K workloads, which require high bandwidth to move textures and frame buffers. This explains why even Low settings at 4K only reach 75 FPS, while the same preset at 1080p hits 218 FPS.

The GPU’s nearest rival, the NVIDIA GeForce RTX 3060 Ti, has an average score of 16129, which is 0.7% higher than the RX 9060’s 16014. In Outriders, this difference would translate to a sub-1% FPS difference, meaning the two cards are effectively interchangeable in this game. The other rivals, such as the AMD Radeon RX 7700 (score 15852, delta 1%) and the AMD Radeon R9 370X (score 15862, delta 1%), are also within a couple of percent, so the RX 9060’s performance is firmly in the mid-range tier.

The GPU’s boost clock of 2990 MHz is high, and the game clock of 2400 MHz suggests that under sustained load, the card will settle near that figure. The 4 nm process node and 132 W TDP indicate a power-efficient design, but the measured FPS shows that the GPU is not capable of high-refresh 4K gaming. The Ultra preset at 4K yields just 30 FPS, which is below the 30 FPS minimum for many games, making it unplayable for most users. The data clearly shows that the RX 9060 is the component that determines the combo’s rank of 2118 out of 3710 in Outriders.

Hardware Specifications

AMD Ryzen 7 5800XT

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4800 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2990 MHz MHz
TDP 132 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800XT + AMD Radeon RX 9060 in Outriders

Resolution Settings Avg FPS
3840x2160 Low 75.0
3840x2160 Medium 55.0
3840x2160 High 41.0
3840x2160 Ultra 30.0
2560x1440 Low 144.0
2560x1440 Medium 104.0
2560x1440 High 78.0
2560x1440 Ultra 57.0
1920x1080 Low 218.0
1920x1080 Medium 165.0
1920x1080 High 124.0
1920x1080 Ultra 90.0

Outriders with Ryzen 7 5800XT + Other GPUs

See how Outriders performs with the same CPU but different graphics cards.

Outriders with RX 9060 + Other CPUs

See how Outriders performs with the same GPU but different processors.

Other Games with Ryzen 7 5800XT + RX 9060

Explore FPS benchmarks for other games using this same hardware combination.