Outriders

The AMD Ryzen 7 5800X and NVIDIA GeForce RTX 5060 combination delivers a highly capable 1080p and 1440p experience in Outriders, with 4K reserved for lower presets. The measured data shows a clear performance hierarchy across the four settings tiers, making the choice of preset almost as impactful as the resolution itself. This analysis breaks down the optimal settings, the GPU's role, and how this specific pairing stacks up against the broader test pool.

Settings Recommendations

The benchmark results indicate that the High preset offers the best balance of visual fidelity and performance for this hardware combination. At 1920x1080, the High preset achieves an average of 141.3 FPS, which is more than sufficient for a smooth looter-shooter experience. Moving up to the Ultra preset at the same resolution drops the average to 103 FPS, a significant 27% reduction in frame rate for what is typically a marginal visual gain in a game like Outriders. The data suggests that the performance cost of Ultra is steep, while the Medium preset, at 189.1 FPS, leaves substantial performance on the table that could be better used for higher graphical fidelity.

For users with 1440p monitors, the High preset remains the recommended choice. It delivers an average of 89.3 FPS, which is ideal for high-refresh-rate gaming. The Medium preset at this resolution provides 118.3 FPS, but again, the jump to High is a better use of the available headroom. The Ultra preset at 2560x1440 falls to 64.4 FPS, which, while playable, introduces a noticeable dip in fluidity that may not be worth the visual upgrade.

At 3840x2160, the story changes dramatically. The High preset manages only 46.7 FPS, which is below the 60 FPS target most gamers prefer. The only viable options for 4K are the Medium and Low presets, which deliver 61 FPS and 83.3 FPS respectively. Given the choice, the Medium preset at 4K is the optimal compromise, as it is the only setting that provides a playable frame rate while retaining a reasonable level of graphical detail. The Low preset, while faster, sacrifices too much visual quality for the modest gain from 61 to 83.3 FPS.

GPU Role

The NVIDIA GeForce RTX 5060 is the clear performance driver in this pairing. Its 8 GB of GDDR7 memory on a 128-bit bus provides a memory bandwidth of 448.0 GB/s, which is sufficient for the texture loads at 1080p and 1440p. However, the data suggests that the 8 GB capacity becomes a limiting factor at higher resolutions. The substantial drop in average FPS from 1440p High (89.3 FPS) to 4K High (46.7 FPS) is a 48% reduction, indicating that the card is struggling with the increased memory pressure and pixel throughput demands of 4K.

The GPU's clock speeds are also relevant to the performance scaling. With a base clock of 2280 MHz and a boost clock of 2497 MHz, the RTX 5060 has a relatively high operating frequency. This helps explain why the card performs admirably at lower resolutions where it is not memory-bandwidth constrained. The FP32 performance of 19.18 TFLOPS is substantial, but the 128-bit memory bus is a bottleneck that prevents the card from maintaining high frame rates as the resolution scales. The benchmark results show that the RTX 5060 is a capable 1080p and 1440p card, but it is not designed for native 4K gaming at high settings.

FAQ

*Q: Can this CPU and GPU combination handle 4K gaming in Outriders?*

A: Yes, but only at lower settings. The measured data shows that at 3840x2160, the High preset yields 46.7 FPS, while the Medium preset achieves 61 FPS and the Low preset reaches 83.3 FPS. The Ultra preset is not viable at this resolution, producing only 35.3 FPS.

Q: What is the best settings preset for a 144Hz monitor at 1440p?

A: The High preset is the recommended choice. It delivers an average of 89.3 FPS, which is suitable for a high-refresh-rate experience. The Ultra preset drops to 64.4 FPS, and the Medium preset, while faster at 118.3 FPS, does not offer the same visual quality as High.

Q: How does the RTX 5060's memory configuration affect performance?

A: The 8 GB of GDDR7 memory on a 128-bit bus provides a bandwidth of 448.0 GB/s. This is adequate for 1080p and 1440p, but the data indicates that the card becomes constrained at 4K, where the performance drop from High settings is severe.

Q: Is the Ultra preset ever worth using with this hardware?

A: At 1920x1080, the Ultra preset produces 103 FPS, which is still playable. However, it represents a 27% performance loss compared to High (141.3 FPS). Unless visual fidelity is the absolute priority, High is the more sensible choice.

Q: What is the average FPS at 1080p with Medium settings?

A: The measured average frame rate is 189.1 FPS. This is a very high frame rate, suggesting that the CPU-GPU combination is not heavily taxed at this resolution and settings level.

Q: How does the combo rank compared to other tested systems?

A: This specific configuration ranks 801st out of 1693 tested combos, placing it in the upper-middle portion of the database. This indicates that while it is not a top-tier enthusiast setup, it outperforms a majority of tested systems.

Measured FPS Breakdown

The following data represents the measured average FPS for the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 5060 in Outriders.

1920x1080:

• Low: 214.3 FPS
• Medium: 189.1 FPS
• High: 141.3 FPS
• Ultra: 103 FPS

2560x1440:

• Low: 160.8 FPS
• Medium: 118.3 FPS
• High: 89.3 FPS
• Ultra: 64.4 FPS

3840x2160:

• Low: 83.3 FPS
• Medium: 61 FPS
• High: 46.7 FPS
• Ultra: 35.3 FPS

The scaling pattern is consistent across resolutions. The difference between Low and Medium is significant, averaging around 15-25% performance loss. The gap between Medium and High is also pronounced, with High being roughly 25-30% slower. The most severe penalty comes from the High to Ultra transition, which costs an additional 27% to 32% of performance. This data suggests that the Ultra preset is heavily demanding and not optimized for this class of GPU.

How This Combo Ranks

Within the benchmark database, this combination of the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 5060 holds a rank of 801 out of 1693 tested combos. This places it in the 47th percentile of all systems tested for Outriders, meaning it outperforms slightly less than half of the tested configurations. The data indicates that this is a solid mid-range pairing that can handle the game well at mainstream resolutions.

The CPU itself, the AMD Ryzen 7 5800X, has an average benchmark score of 27606, placing it at the 84th percentile among all CPUs. Its nearest rival is the AMD Ryzen 7 5800, which scores 27535, a negligible 0.3% difference. This suggests the CPU is not a bottleneck in this configuration. The GPU, the RTX 5060, has an average score of 30109 and sits at the 73rd percentile among all GPUs. Its closest competitor is the AMD Radeon RX 7700 XT, which scores 30097, a 0% difference, indicating they are essentially tied in synthetic benchmarks.

The system's overall rank of 801 suggests that the GPU's mid-range standing holds back the CPU's high-end performance. The CPU is capable of feeding frames faster than the GPU can render them at higher settings, as evidenced by the large FPS gaps between Low and Ultra presets. The data confirms that this is a balanced combo for 1080p and 1440p gaming, but it falls short of being a high-end performer due to the GPU's limitations at 4K and the demanding Ultra preset.