Outriders
This combination provides smooth gameplay with an average of 107 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 33 | 48 | 63 | 90 |
| 1440p QHD | 66 | 96 | 126 | 155 |
| 1080p Full HD | 108 | 146 | 165 | 186 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Outriders with AMD Ryzen 7 5700X3D + NVIDIA GeForce RTX 3070, In-Depth Analysis
Resolution Scaling
The measured FPS data for Outriders with the AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 3070 shows a clear pattern of resolution-dependent scaling. At 1080p High settings, the combo delivers 146.1 FPS, which drops to 95.8 FPS at 1440p High — a reduction of roughly 34% — and further down to 48.4 FPS at 4K High, representing a 67% drop from the 1080p figure. This scaling behavior indicates that the GPU becomes the primary limiting factor as resolution increases, with the RTX 3070's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth being exercised more heavily at higher pixel counts.
The gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the spread from Low (185.7 FPS) to Ultra (107.6 FPS) is 78.1 FPS. At 1440p, that spread grows to 89.0 FPS (155.3 Low vs 66.3 Ultra). At 4K, the spread reaches 56.3 FPS (89.7 Low vs 33.4 Ultra), but the proportional difference is more telling: Ultra at 4K runs at just 37% of the Low setting's frame rate. This suggests that the Ultra preset's additional rendering demands—likely heavier shading and post-processing—interact with the GPU's 20.31 TFLOPS of FP32 compute in ways that become prohibitive at 4K.
The data also reveals that the CPU is not the bottleneck at lower resolutions. At 1080p Low, the combo reaches 185.7 FPS, which is well above typical monitor refresh rates and demonstrates that the Ryzen 7 5700X3D's 8 cores and 16 threads, boosted by a 96 MB shared L3 cache, can feed the RTX 3070 adequately. However, the 5700X3D's boost clock of 4.10 GHz and base clock of 3.00 GHz are modest for a 5000-series part, and the 1080p Ultra result of 107.6 FPS suggests that the CPU's single-thread performance—scoring 3157 in Cinebench R23 single-core—is sufficient but not exceptional for Outriders' engine.
How This Combo Ranks
The combination of the Ryzen 7 5700X3D and RTX 3070 ranks 853rd out of 1693 tested combos in Outriders, placing it in the upper-middle tier of all configurations. This percentile position—roughly the 50th percentile—is consistent with the measured FPS data showing strong 1080p performance but more modest 4K results. The CPU's percentileVsAllCpus of 82 indicates it outperforms 82% of all CPUs in general benchmarks, while the GPU's percentileVsAllGpus of 72 shows it beats 72% of all GPUs. The combo's mid-pack ranking in this specific game therefore reflects the GPU's relative weakness at 4K rather than any CPU limitation.
The CPU's nearest rivals in general benchmarks provide context: the Intel Core i7-1360P scores 24627 (0.2% higher), the AMD Ryzen 5 7600X3D scores 24605 (0.3% higher), and the Intel Core i5-11600 scores 24559 (0.5% higher). The AMD Ryzen AI Max 385 scores 24811 (-0.6% relative to the 5700X3D's 24673 average). These tight deltas—all within 1.1%—indicate that the 5700X3D's general compute performance is well-matched to its peers, though none of these rivals are direct gaming comparisons in this data.
For the GPU, the RTX 3070's nearest rivals show a different picture. The AMD FirePro S7150 scores 28409 (-0.6%), the AMD Radeon RX 6600 XT scores 27985 (0.9%), the NVIDIA GeForce GTX 980 Ti scores 27956 (1.0%), and the AMD Radeon R9 M295X scores 28541 (-1.1%). The 3070's average benchmark score of 28238 places it in a cluster where the RX 6600 XT is within 0.9% and the GTX 980 Ti within 1.0%—but those older cards would likely fare worse in Outriders specifically due to architectural differences in DirectX 12 Ultimate support.
GPU Role
The RTX 3070's specifications directly explain its behavior in Outriders. The GPU's 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is adequate for 1080p and 1440p but becomes strained at 4K Ultra where the 33.4 FPS result indicates memory capacity or bandwidth limitations. The core clock runs at 1500 MHz base and 1725 MHz boost, with memory clocked at 1750 MHz (14 Gbps effective), producing a pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s.
The 3070's 5888 shading units, 184 TMUs, and 96 ROPs deliver 20.31 TFLOPS of FP32 compute. At 4K High (48.4 FPS), the GPU is clearly the limiting factor—the CPU could theoretically push more frames, but the GPU's compute and memory subsystem cap the output. The drop from 4K Medium (63.4 FPS) to 4K Ultra (33.4 FPS) is a 47% reduction, suggesting that the Ultra preset likely enables effects that disproportionately tax the 3070's resources, possibly ray-traced elements or high-resolution shadows given the 46 RT cores and 184 tensor cores present on the GA104 chip.
The GPU's 72nd percentile ranking among all GPUs, combined with its benchmark scores—22214 in Passmark G3D and 11195 in Passmark GPU Compute—positions it as a capable mid-high tier card. Its 3DMark Steel Nomad DX12 score of 3162 indicates solid DirectX 12 performance, which is relevant for Outriders given its engine's reliance on modern APIs. The 3070's end-of-life production status and 2020 release date mean it lacks some newer optimizations, but its 8 nm Samsung process and 17,400 million transistors on a 392 mm² die provide substantial raw capability.
FAQ
Q: What is the best resolution for this combo in Outriders?
A: The data shows 1440p High delivers 95.8 FPS, which is well above playable thresholds while maintaining visual quality. At 4K High, the frame rate drops to 48.4 FPS, making 1440p the practical ceiling for smooth gameplay.
Q: How does Ultra settings affect performance compared to High?
A: At 1080p, Ultra runs at 107.6 FPS versus 146.1 FPS on High—a 26% reduction. At 4K, Ultra drops to 33.4 FPS versus 48.4 FPS on High, a 31% reduction. The Ultra preset imposes a consistent performance penalty across resolutions.
Q: Is the CPU or GPU the bottleneck at 1080p?
A: At 1080p Low, the combo reaches 185.7 FPS, indicating the GPU is still the primary limiter even at low settings. The Ryzen 7 5700X3D's 8 cores and 16 threads with 96 MB L3 cache are sufficient to avoid CPU bottlenecks at this resolution.
Q: What are the measured FPS at 1440p Medium?
A: At 2560x1440 with Medium settings, the combo achieves 126.4 FPS average. This is between the Low result of 155.3 FPS and High result of 95.8 FPS, showing a linear scaling with settings.
Q: How does the RTX 3070 compare to its nearest rivals in general benchmarks?
A: The RTX 3070's average benchmark score of 28238 is 0.9% higher than the AMD Radeon RX 6600 XT and 1.0% higher than the NVIDIA GeForce GTX 980 Ti, while being 0.6% lower than the AMD FirePro S7150 and 1.1% lower than the AMD Radeon R9 M295X.
Q: Does the combo rank higher in Outriders than in general benchmarks?
A: The combo ranks 853rd of 1693 combos in Outriders, which is roughly the 50th percentile. The CPU ranks in the 82nd percentile and the GPU in the 72nd percentile generally, so the game-specific ranking is lower than the component-level percentiles suggest.
Measured FPS Breakdown
At 1920x1080, the combo's performance spans a wide range. Low settings produce 185.7 FPS, Medium reaches 164.7 FPS, High delivers 146.1 FPS, and Ultra drops to 107.6 FPS. The step from Medium to High is a 11.3% reduction, while High to Ultra is a 26.4% reduction, indicating that the Ultra preset's additional effects are particularly demanding at this resolution.
At 2560x1440, the frame rates remain strong but show more sensitivity to settings. Low achieves 155.3 FPS, Medium runs at 126.4 FPS, High produces 95.8 FPS, and Ultra drops to 66.3 FPS. The Medium to High drop is 24.2%, and High to Ultra is 30.8%, showing that each settings tier imposes a larger relative penalty at 1440p than at 1080p.
At 3840x2160, the GPU's limitations become pronounced. Low runs at 89.7 FPS, Medium at 63.4 FPS, High at 48.4 FPS, and Ultra at 33.4 FPS. The Low to Medium drop is 29.3%, Medium to High is 23.7%, and High to Ultra is 31.0%. The 4K Ultra result of 33.4 FPS is the lowest measured value and represents a 82% reduction from the 1080p Low peak, highlighting the RTX 3070's 8 GB memory capacity as a key constraint at this resolution.
CPU Role
The AMD Ryzen 7 5700X3D's specifications show why it does not bottleneck the RTX 3070 in Outriders. The 8-core, 16-thread configuration based on Zen 3 architecture (Vermeer codename) runs at base 3.00 GHz and boost 4.10 GHz on 7 nm TSMC process. The 96 MB shared L3 cache is the standout feature, providing substantial on-die storage that benefits game workloads with high data locality. The CPU's Cinebench R23 multicore score of 22366 and single-core score of 3157 indicate balanced performance, while the Passmark multithread score of 26318 and single-thread score of 2970 reinforce this picture.
The CPU's 3DMark scores show scaling from 1575 (2 threads) to 6764 (16 threads), demonstrating effective multi-threading. The 16-thread score of 6764 is nearly identical to the max-thread score of 6755, suggesting that the CPU reaches its full throughput with 16 threads and gains nothing from additional parallelism. This is relevant for Outriders, which is unlikely to use more than 8-16 threads effectively.
The 5700X3D's 82nd percentile ranking among all CPUs, with an average benchmark score of 24673, places it above the Intel Core i7-1360P (24627, 0.2% higher), AMD Ryzen 5 7600X3D (24605, 0.3% higher), and Intel Core i5-11600 (24559, 0.5% higher). The AMD Ryzen AI Max 385 (24811) is 0.6% higher. These small deltas suggest the 5700X3D is well-positioned in its class, and the 105 W TDP with a 74 mm² die size indicates efficient power delivery for sustained gaming loads.
In Outriders specifically, the CPU's role is most evident at 1080p Low where the combo reaches 185.7 FPS. This high frame rate indicates the CPU can feed the GPU with sufficient draw calls and game logic updates. At 4K, the CPU's contribution is less visible because the GPU becomes the constraint, but the 5700X3D's strong multi-threaded performance ensures that frame pacing remains consistent even when GPU load is high. The 8 cores and 16 threads provide headroom for background tasks, and the 96 MB L3 cache reduces memory latency for game data, which is particularly beneficial in looter shooter titles where many objects and entities are tracked.
Hardware Specifications
AMD Ryzen 7 5700X3D
NVIDIA GeForce RTX 3070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700X3D + NVIDIA GeForce RTX 3070 in Outriders
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 89.7 |
| 3840x2160 | Medium | 63.4 |
| 3840x2160 | High | 48.4 |
| 3840x2160 | Ultra | 33.4 |
| 2560x1440 | Low | 155.3 |
| 2560x1440 | Medium | 126.4 |
| 2560x1440 | High | 95.8 |
| 2560x1440 | Ultra | 66.3 |
| 1920x1080 | Low | 185.7 |
| 1920x1080 | Medium | 164.7 |
| 1920x1080 | High | 146.1 |
| 1920x1080 | Ultra | 107.6 |
Outriders with Ryzen 7 5700X3D + Other GPUs
See how Outriders performs with the same CPU but different graphics cards.
Outriders with RTX 3070 + Other CPUs
See how Outriders performs with the same GPU but different processors.
Other Games with Ryzen 7 5700X3D + RTX 3070
Explore FPS benchmarks for other games using this same hardware combination.