Outriders

The AMD Ryzen 5 7600X paired with the NVIDIA GeForce RTX 5090 D delivers a commanding performance profile in Outriders, placing this combination in the top 2.3% of all tested configurations. The data reveals a system that is heavily GPU-bound at higher resolutions, yet demonstrates surprising headroom at 1080p where the CPU begins to assert its influence. Across the board, this combo provides a smooth experience, though the scaling patterns expose distinct bottlenecks depending on the resolution target.

Resolution Scaling

The performance trajectory from 1080p to 4K in Outriders is steep, but the shape of that curve is revealing. At 1080p with High settings, the combo produces 204 FPS. Moving to 1440p drops that to 175 FPS, a 14% reduction, while 4K High falls to 94 FPS, a 54% decrease from the 1080p figure. This pattern is characteristic of a GPU-limited scenario at higher resolutions; the RTX 5090 D is the primary constraint once pixel count rises.

However, the low settings data tells a different story about the CPU’s role. At 1080p Low, the system hits 255 FPS, which is only 25% higher than the 1080p High result. This relatively modest gain from reducing graphics load indicates that the Ryzen 5 7600X is beginning to cap frame rates even at 1080p. The 6-core, 12-thread processor with a 4.70 GHz base and 5.30 GHz boost clock provides enough throughput to drive very high frame rates, but the ceiling is visible. At 1440p Low, the system reaches 219 FPS, and at 4K Low it still manages 172 FPS, showing that the GPU can maintain high performance when graphical demands are low.

The medium settings results provide the most complete picture with min and max frame data. At 1080p Medium, the average is 227 FPS with a minimum of 193 FPS and maximum of 261 FPS. The 68 FPS spread between min and max indicates frame time variance that is more pronounced than at higher resolutions. At 1440p Medium, the average drops to 194 FPS with a min of 165 and max of 224 FPS. At 4K Medium, the average falls to 125 FPS with a min of 106 and max of 144 FPS. The narrowing gap between min and max at higher resolutions—from 68 FPS at 1080p to 38 FPS at 4K—suggests that the GPU becomes the consistent limiting factor, reducing the CPU-induced frame spikes.

Ultra settings represent the heaviest load and the clearest GPU bottleneck. At 1080p Ultra, the combo produces 181 FPS, which is only 11% lower than High settings. At 1440p Ultra, it drops to 130 FPS, and at 4K Ultra, the system manages 68 FPS. The scaling from 1080p Ultra to 4K Ultra shows a 62% performance loss, which is the steepest drop across all settings levels. This confirms that at Ultra quality, the RTX 5090 D’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are being fully exercised, and the resolution increase directly translates to proportional frame rate declines.

The overall pattern indicates that for 1080p and 1440p gaming, this combo has substantial headroom, with the CPU occasionally limiting performance at the lowest settings. At 4K, the GPU is unambiguously the bottleneck, and the frame rates, while playable at High and Medium, show that even this flagship GPU cannot maintain triple-digit averages at Ultra quality.

GPU Role

The NVIDIA GeForce RTX 5090 D is the dominant component in this pairing, and its specifications explain the measured results. The GPU operates with a base clock of 2017 MHz and a boost clock of 2407 MHz, which are the frequencies that drive the 104.8 TFLOPS of FP32 compute. The 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is critical for Outriders’ texture-heavy environments at 4K resolution.

The benchmark data shows that this GPU sits in the 92nd percentile of all GPUs, with an average benchmark score of 77712. Its nearest rivals include the AMD Radeon RX 6850M XT, which scores 78940 (1.6% higher), and the NVIDIA Tesla P100 PCIe 16 GB at 79605 (2.4% higher). This positioning indicates that the RTX 5090 D is near the top of the performance hierarchy, though not the absolute fastest in synthetic tests. In Outriders specifically, the GPU’s capability translates to 94 FPS at 4K High, which is a strong result for a demanding resolution.

The 4K Medium result of 125 FPS with a minimum of 106 FPS shows that the GPU can maintain a smooth experience when settings are moderated. The VRAM allocation is unlikely to be a limiting factor in this game, as 32 GB is exceptionally generous for a 2021 title. The 176 ROPs and 680 TMUs handle the rasterization workload efficiently, and the 170 RT cores, while not heavily utilized in this non-ray-traced game, contribute to the overall architecture’s capability.

The GPU’s role becomes most apparent when comparing Low and High settings at the same resolution. At 4K, Low produces 172 FPS while High produces 94 FPS, a 45% performance difference. This is a substantial gap that reflects the increased shading and texture work required at High settings. The GPU’s 423.6 GPixel/s pixel rate and 1,636.8 GTexel/s texture rate are the physical limits that determine these frame rates, and the data shows that the RTX 5090 D is being fully utilized at 4K High and Ultra.

FAQ

Q: Is the Ryzen 5 7600X + RTX 5090 D combo capable of 4K gaming in Outriders?

A: Yes, the data shows playable frame rates at 4K. The combo achieves 94 FPS at High settings, 125 FPS at Medium, and 172 FPS at Low. However, at 4K Ultra, it drops to 68 FPS, which is below the 94 FPS High result and may feel less smooth.

Q: How does the CPU performance compare to its nearest rivals?

A: The Ryzen 5 7600X has an average benchmark score of 27636, which puts it 0.2% ahead of the AMD Ryzen 7 5700X and Intel Core i5-12600K, both scoring 27578. It is 0.4% ahead of the AMD Ryzen 7 5800 at 27535, but 0.3% behind the AMD Ryzen 5 8500GE at 27712.

Q: What frame rates can be expected at 1440p with this setup?

A: At 1440p, the combo delivers 175 FPS at High, 194 FPS at Medium, 219 FPS at Low, and 130 FPS at Ultra. The Medium settings show a minimum of 165 FPS and a maximum of 224 FPS, indicating consistent performance.

Q: Does the RTX 5090 D outperform its nearest GPU rivals?

A: The RTX 5090 D’s average benchmark score is 77712, which is 1.1% higher than the AMD Radeon RX 6650M XT at 76904. However, it trails the AMD Radeon RX 6850M XT by 1.6% (78940) and the NVIDIA Tesla P100 PCIe 12 GB by 2.1% (79396).

Q: Is the CPU a bottleneck at 1080p?

A: The evidence suggests partial CPU limitation at 1080p Low. The frame rate of 255 FPS at 1080p Low is only 25% higher than the 204 FPS at 1080p High, which is a smaller improvement than expected if the GPU were the sole constraint. The CPU’s 6 cores and 12 threads at 5.30 GHz boost are sufficient for high frame rates, but they cap the maximum output.

Q: What is the performance difference between Low and Ultra at 4K?

A: At 4K, Low settings produce 172 FPS while Ultra produces 68 FPS, a difference of 104 FPS or 60% lower performance. This large gap highlights the GPU’s workload sensitivity to settings, with Ultra placing a significantly heavier load on the 32 GB GDDR7 memory and 104.8 TFLOPS compute.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across all settings and resolutions. At 1920x1080, the combo achieves 204 FPS at High, 255 FPS at Low, 227 FPS at Medium, and 181 FPS at Ultra. The Medium setting includes a minimum of 193 FPS and a maximum of 261 FPS, showing a 68 FPS variance that indicates some frame pacing instability at this resolution.

Moving to 2560x1440, the frame rates remain high but show the expected decline. High settings produce 175 FPS, Low produces 219 FPS, Medium produces 194 FPS, and Ultra produces 130 FPS. The Medium setting’s minimum of 165 FPS and maximum of 224 FPS represent a 59 FPS spread, which is slightly tighter than at 1080p.

At 3840x2160, the GPU becomes the clear bottleneck. High settings deliver 94 FPS, Low delivers 172 FPS, Medium delivers 125 FPS, and Ultra delivers 68 FPS. The Medium setting shows a minimum of 106 FPS and a maximum of 144 FPS, a 38 FPS spread that is the tightest across all resolutions, indicating more consistent frame delivery when the GPU is fully loaded.

The progression from 1080p to 4K at each settings level is consistent. At High, the drop from 204 FPS to 94 FPS represents a 54% reduction. At Medium, the drop from 227 FPS to 125 FPS is a 45% reduction. At Low, the drop from 255 FPS to 172 FPS is a 33% reduction. At Ultra, the drop from 181 FPS to 68 FPS is a 62% reduction. These percentages show that Ultra settings are the most sensitive to resolution scaling, while Low settings are the least sensitive, because the CPU becomes relatively more important at lower graphical loads.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 7600X and NVIDIA GeForce RTX 5090 D ranks 86th out of 3710 tested combos in Outriders. This puts it in the top 2.3% of all configurations, a position that reflects the high-end nature of both components. The rank indicates that this combo outperforms the vast majority of systems tested, though there are 85 other combinations that achieve higher frame rates in this game.

The ranking is likely driven by the GPU’s strong performance, as the RTX 5090 D sits in the 92nd percentile of all GPUs. The CPU’s 79th percentile ranking is lower, suggesting that the processor is not the primary driver of this combo’s high placement. The 86th rank out of 3710 combos means that this system is in the top tier, but not at the absolute top, which would require an even more powerful CPU to complement the GPU.

In practical terms, this rank means the combo is well-suited for Outriders at all but the most extreme settings. The 94 FPS at 4K High is a strong result that places this system ahead of most configurations, and the 125 FPS at 4K Medium provides a comfortable margin for smooth gameplay. The rank also indicates that the system has headroom for other demanding titles, as its performance in Outriders is not marginal.

CPU Role

The AMD Ryzen 5 7600X plays a supporting but essential role in this combo, and its specifications show why. This 6-core, 12-thread processor from the 7000 series operates at a base clock of 4.70 GHz and a boost clock of 5.30 GHz, built on the Zen 4 Raphael architecture using a 5 nm process. The 32 MB of shared L3 cache and 83.2 GB/s of dual-channel DDR5 memory bandwidth provide adequate data throughput for Outriders’ game logic and physics.

The CPU’s benchmark results place it in the 79th percentile of all CPUs, with an average score of 27636. Its nearest rival, the AMD Ryzen 7 5700X, scores 27578, a 0.2% difference. The Intel Core i5-12600K also scores 27578, while the AMD Ryzen 7 5800 scores 27535 and the AMD Ryzen 5 8500GE scores 27712. These close scores indicate that the 7600X is in a tightly contested performance tier, with no significant advantage or disadvantage over its direct competitors.

In Outriders, the CPU’s role is most evident at lower resolutions and settings. At 1080p Low, the 255 FPS result suggests that the CPU is approaching its limit, as reducing graphical load does not yield a proportional frame rate increase. The 3DMark single-thread score of 1060 and multi-thread score of 6845 indicate strong per-core performance, which is beneficial for a game that relies on a few primary threads. The Cinebench R23 single-core score of 1965 and multi-core score of 15236 further confirm the CPU’s capability.

However, at 4K, the CPU’s impact diminishes significantly. The difference between 4K Low (172 FPS) and 4K High (94 FPS) is driven by the GPU, not the CPU, as the processor has ample headroom to feed the RTX 5090 D. The CPU’s 6 cores are sufficient for Outriders’ workload, as the game does not appear to scale beyond 12 threads in a way that would bottleneck this processor. The result is a balanced system where the CPU provides enough throughput for high frame rates at 1080p, while the GPU takes over as the limiting factor at higher resolutions.