Outriders

The AMD Ryzen 5 7600X and NVIDIA GeForce RTX 4090 combination delivers exceptional performance in Outriders, with the data showing this pairing ranks in the 96.5th percentile of all tested configurations, placing 131st out of 3,710 combos. The benchmark results indicate a system that is heavily GPU-bound at higher resolutions, but the CPU's strong single-thread performance ensures that even at 1080p, frame rates remain exceptionally high. This analysis breaks down the measured FPS data to show how resolution and settings impact the experience, what each component contributes, and how this specific pairing compares to the broader field.

Resolution Scaling

The FPS data reveals a clear pattern of performance scaling across resolutions, with the RTX 4090's immense rendering power being the primary driver of frame rates. At High settings, the average FPS drops from 204 at 1920x1080 to 165 at 2560x1440, a 19% reduction, and then further to 86 at 3840x2160, which represents a 58% drop from the 1080p figure. This steep decline from 1440p to 4K indicates that the GPU is the limiting factor at higher resolutions, as the workload on the rendering hardware increases significantly with pixel count.

The scaling behavior shifts when examining Low settings, where the average FPS goes from 255 at 1080p to 219 at 1440p and then to 158 at 4K. The 38% drop from 1080p to 4K at Low settings is less severe than the 58% drop seen at High settings, suggesting that at lower graphical loads, the CPU begins to play a more significant role in maintaining frame rates. This is particularly evident at 1080p Low, where the 255 FPS average approaches the limits of what the Ryzen 5 7600X's six cores can feed to the GPU.

Ultra settings show the most pronounced resolution scaling, with average FPS falling from 181 at 1080p to 119 at 1440p and then to 62 at 4K. The 66% reduction from 1080p to 4K at Ultra settings confirms that Outriders' highest quality presets place an enormous burden on the GPU, and the RTX 4090's 24 GB of GDDR6X memory and 1.01 TB/s bandwidth are essential for maintaining playable frame rates at this configuration. The data suggests that for 4K gaming, High settings offer the best balance, delivering 86 FPS average, while Ultra at 4K may require compromises for smoother gameplay.

FAQ

Q: What is the best resolution to play Outriders with this CPU and GPU combination?

A: The data shows that 2560x1440 at High settings delivers 165 FPS average, which is the sweet spot for high refresh rate monitors. At this resolution, the system maintains excellent frame rates across all settings, with even Ultra averaging 119 FPS. For 4K gaming, High settings at 86 FPS average provide a smooth experience, while Ultra at 62 FPS may be too demanding for competitive play.

Q: How does the RTX 4090's performance compare to its nearest rivals in this game?

A: The GPU's average benchmark score of 60,347 places it just 0.3% ahead of the AMD Radeon Pro Vega 48 and 0% ahead of the Intel Arc Pro A60. However, it is 2.5% behind the AMD Radeon Pro W6600M and 2.9% ahead of the AMD Radeon PRO V710. These deltas are minimal, indicating that the RTX 4090's raw compute power is well-matched with these professional-grade alternatives in synthetic tests, though in-game performance is driven by the measured FPS data.

Q: Is the Ryzen 5 7600X a bottleneck for the RTX 4090 in Outriders?

A: At 1080p with Low settings, the 255 FPS average suggests the CPU is reaching its limits, as lowering resolution further would not yield significantly higher frame rates. However, at higher resolutions like 1440p and 4K, the GPU becomes the primary bottleneck, with the CPU's 6 cores and 12 threads providing sufficient headroom. The CPU's single-thread score of 1,965 in Cinebench R23 indicates strong per-core performance that supports high FPS gaming.

Q: What settings provide the best FPS improvement at 4K resolution?

A: The data shows that dropping from Ultra to High at 3840x2160 increases average FPS from 62 to 86, a 39% improvement. Moving from High to Medium further increases FPS to 115, and Low settings push it to 158. The largest single-step gain is from Ultra to High, making High settings the most efficient choice for 4K gameplay.

Q: How does this combo rank among all tested configurations?

A: The Ryzen 5 7600X and RTX 4090 pairing ranks 131st out of 3,710 tested combos, placing it in the top 3.5% of all configurations. This high ranking reflects the combination of a top-tier GPU and a modern mid-range CPU that excels in gaming workloads.

Q: Does the RTX 4090's 24 GB VRAM matter for Outriders?

A: The 24 GB of GDDR6X memory is more than sufficient for Outriders, as the game's highest quality settings at 4K still average 62 FPS. The memory bandwidth of 1.01 TB/s ensures that texture streaming and high-resolution assets are handled without stuttering, and the GPU's 82.58 TFLOPS FP32 performance provides ample compute headroom for the looter shooter's effects.

GPU Role

The NVIDIA GeForce RTX 4090 is the dominant component in this pairing, driving frame rates across all tested resolutions and settings. The GPU's base clock of 2235 MHz and boost clock of 2520 MHz, combined with 16,384 shading units, deliver massive compute throughput that excels in Outriders' demanding scenes. The 128 RT cores and 512 tensor cores handle the game's ray-traced effects and DLSS processing, though the measured FPS data shows that even without these features, the card sustains high frame rates.

The 24 GB of GDDR6X memory on a 384-bit bus provides a bandwidth of 1.01 TB/s, which is critical for maintaining smooth performance at 4K Ultra settings. The benchmark results show that at 3840x2160 Ultra, the average FPS drops to 62, indicating that the GPU's memory bandwidth and compute resources are being fully utilized. The GPU's 88th percentile ranking among all GPUs, with an average benchmark score of 60,347, places it among the top-tier graphics cards, and its nearest rivals in synthetic tests show deltas of less than 3%, confirming its position.

The RTX 4090's 450 W TDP and triple-slot design are necessary to sustain these performance levels, with the 16-pin power connector requiring an 850 W suggested PSU. The data shows that the GPU's performance scales predictably with resolution, with the largest FPS drops occurring between 1440p and 4K. At 1080p, the GPU is often underutilized, as frame rates exceed 200 FPS at High settings, but at 4K, the card's full capabilities are brought to bear.

How This Combo Ranks

The combination of the AMD Ryzen 5 7600X and NVIDIA GeForce RTX 4090 ranks 131st out of 3,710 tested combos in Outriders, placing it in the top 3.5% of all configurations tested. This high ranking is primarily driven by the GPU's exceptional performance, as the RTX 4090's benchmark scores place it in the 88th percentile of all GPUs. The CPU's 79th percentile ranking among all processors is respectable, but the combo's overall rank is elevated by the GPU's dominance.

The data shows that this pairing outperforms the vast majority of tested combos, with only 130 configurations achieving higher frame rates in Outriders. The combo's rank is particularly impressive given that the Ryzen 5 7600X is a mid-range CPU, suggesting that the GPU is the primary driver of the high ranking. The CPU's nearest rivals, such as the AMD Ryzen 7 5700X and Intel Core i5-12600K, have average scores within 0.2% of the 7600X, indicating that the CPU is not a limiting factor in this pairing.

The ranking also reflects the balance between the two components. While the CPU's multi-threaded performance (15,236 in Cinebench R23) is solid, it is the GPU's 82.58 TFLOPS of FP32 compute that pushes the combo to the top tier. This suggests that for Outriders, a high-end GPU paired with a capable mid-range CPU is a more effective combination than a top-tier CPU with a mid-range GPU.

CPU Role

The AMD Ryzen 5 7600X provides the processing foundation for this combo, with 6 cores and 12 threads based on the Zen 4 architecture. The CPU's base clock of 4.70 GHz and boost clock of 5.30 GHz deliver strong single-thread performance, as evidenced by its Cinebench R23 single-core score of 1,965 and Geekbench single-core score of 2,603. This per-core strength is crucial for Outriders, which benefits from high single-thread performance in many game scenarios.

The CPU's 32 MB of shared L3 cache and 64 KB of L1 cache per core help reduce memory latency, while the dual-channel DDR5 memory support with 83.2 GB/s bandwidth ensures data flows efficiently to the GPU. The 5 nm process node and 6,570 million transistors on a 71 mm² die allow for high clock speeds while maintaining a 105 W TDP. The CPU's benchmark scores show a 79th percentile ranking among all processors, with an average benchmark score of 27,636.

In Outriders, the CPU's role becomes more apparent at lower resolutions and settings. At 1080p Low, the 255 FPS average suggests the CPU is approaching its limit, as the GPU has more than enough headroom to render more frames. The CPU's 3DMark single-thread score of 1,060 and multi-thread score of 6,879 indicate that it can handle the game's physics and AI workloads without bottlenecking the GPU, but at 1080p, the CPU is the more significant constraint. At higher resolutions, the GPU becomes the bottleneck, and the CPU's performance is more than adequate.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four settings presets. At 1920x1080, the average FPS ranges from 181 at Ultra settings to 255 at Low settings, with High at 204 and Medium at 227. The Medium preset shows a minimum FPS of 193 and a maximum of 261, indicating some frame time variance, but the overall averages are exceptionally high. This resolution is ideal for high refresh rate monitors, as even Ultra settings exceed 180 FPS.

At 2560x1440, the average FPS drops to 119 at Ultra, 165 at High, 194 at Medium, and 219 at Low. The Medium preset exhibits a minimum of 165 and a maximum of 224, showing a wider range than at 1080p. The 1440p resolution provides a good balance between visual fidelity and frame rate, with High settings delivering 165 FPS average, which is suitable for 144Hz and 165Hz displays.

At 3840x2160, the average FPS falls to 62 at Ultra, 86 at High, 115 at Medium, and 158 at Low. The Medium preset at 4K has a minimum of 97 and a maximum of 132, showing that even the lowest frame rates remain above 60 FPS. The 4K Ultra setting is the most demanding, with an average of 62 FPS, while High settings at 86 FPS provide a smoother experience. The data shows that the RTX 4090 can handle 4K gaming with ease, but players seeking higher frame rates should consider High or Medium settings.