Outriders

Outriders

AVERAGE FPS
94
good

This combination provides smooth gameplay with an average of 94 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 41 55 75
1440p QHD 57 78 104 144
1080p Full HD 90 124 154 173

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 75
3840x2160 Medium 55
3840x2160 High 41
3840x2160 Ultra 30
2560x1440 Low 144
2560x1440 Medium 104
2560x1440 High 78
2560x1440 Ultra 57
1920x1080 Low 173
1920x1080 Medium 154
1920x1080 High 124
1920x1080 Ultra 90

Outriders with AMD Ryzen 5 5600F + AMD Radeon RX 9060, In-Depth Analysis

The AMD Ryzen 5 5600F and AMD Radeon RX 9060 combination delivers a solid 1080p and 1440p experience in Outriders, with the data indicating a clear performance ceiling at 4K. The measured frames per second (FPS) across various settings and resolutions reveal a component pairing that is well-balanced for high-refresh-rate gaming at lower resolutions but becomes GPU-bound as pixel count increases. This analysis examines the specific benchmark results to determine the optimal settings and the role each component plays in this looter shooter.

FAQ

Q: What is the best resolution for this combo to achieve 60+ FPS?

A: The data shows that at 2560x1440 with High settings, the combo achieves an average of 78 FPS. At 1920x1080, all tested settings (Low, Medium, High, Ultra) yield average FPS well above 60, with the lowest being 90 FPS on Ultra. Therefore, 1440p is viable for a 60 FPS experience, while 1080p is the target for very high frame rates.

Q: How does the Ultra preset compare to High in terms of performance hit?

A: The performance cost of moving from High to Ultra is significant. At 1920x1080, the average FPS drops from 124 on High to 90 on Ultra, a decrease of 34 FPS. At 2560x1440, the drop is from 78 FPS on High to 57 FPS on Ultra, a difference of 21 FPS. At 3840x2160, the drop is from 41 FPS on High to 30 FPS on Ultra.

Q: Is the CPU or GPU more of a limiting factor at 1080p?

A: At 1920x1080, the frame rates are very high, with Low settings hitting 173 FPS and Medium at 154 FPS. The scaling from Low to Medium to High (173 to 154 to 124 FPS) suggests the system is still capable of high output, but the decreasing gains indicate that the GPU is starting to become the primary bottleneck as settings increase, rather than the CPU.

Q: What kind of frame rate can I expect at 4K with this setup?

A: The benchmark results show that 4K (3840x2160) is demanding for this combo. The highest average FPS at this resolution is 75 on Low settings. Medium settings yield 55 FPS, High drops to 41 FPS, and Ultra is at 30 FPS. This indicates 4K is only playable on Low settings for a smooth experience.

Q: How does this combo rank among all tested combinations for Outriders?

A: The combo ranks 1794 out of 2913 tested combinations. This places it in the middle of the pack, indicating that while it can run the game, many other hardware pairings deliver higher performance.

Q: What is the performance difference between the Low and Medium presets at 1440p?

A: At 2560x1440, the Low preset achieves an average of 144 FPS, while the Medium preset has an average of 104 FPS. This is a 40 FPS difference, suggesting that the Medium preset adds significant visual detail at a notable performance cost.

GPU Role

The AMD Radeon RX 9060 is the central component for rendering Outriders, and its memory configuration and clock speeds are key to its performance. The GPU features 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 288.0 GB/s. This memory size is adequate for 1080p and 1440p gaming, but the 3840x2160 results suggest it may be a limiting factor at higher resolutions and settings. The GPU's boost clock is listed at 2990 MHz, with a game clock of 2400 MHz, which helps drive the high frame rates seen at lower resolutions.

The benchmark data strongly indicates that the RX 9060 is the bottleneck in this system, particularly at higher resolutions. The FPS scaling from 1080p to 4K is dramatic. For instance, on High settings, the average FPS drops from 124 at 1920x1080 to 78 at 2560x1440, and finally to 41 at 3840x2160. This pattern shows a linear decline with increasing pixel count, a classic sign of GPU limitation. The GPU's benchmark scores, such as a Passmark G3D score of 17631, place it in the 59th percentile of all GPUs, and its nearest rivals include the NVIDIA GeForce RTX 3060 Ti, which it trails by 0.7%. This context suggests it is a capable mid-range card that can handle Outriders well at mainstream resolutions but is not designed for 4K ultra gaming.

The 8 GB VRAM is a particular point of interest. In Outriders, a game with detailed environments and many on-screen effects, texture-heavy settings at 4K can exceed this memory capacity. The performance drop at 4K, especially from Medium (55 FPS) to High (41 FPS) and Ultra (30 FPS), could be partly attributed to the GPU struggling to manage memory bandwidth and capacity. The data doesn't isolate VRAM usage, but the pattern is consistent with a card that is overpowered by the demand at 4K Ultra.

Settings Recommendations

Based on the measured FPS, the optimal balance of visual quality and performance depends on the target resolution. For a 60 FPS target, the 2560x1440 High preset is the clear choice, delivering 78 FPS. This setting provides a significant visual upgrade over Medium while maintaining a comfortable frame rate margin above 60. Pushing to Ultra at this resolution drops the average to 57 FPS, which is below the 60 FPS threshold, so High is the recommended preset for a smooth 1440p experience.

At 1920x1080, the player has more freedom. The High preset at 124 FPS is ideal for high-refresh-rate monitors (120Hz+). The Ultra preset also offers a playable experience at 90 FPS, but the 34 FPS cost over High is substantial. For competitive play or maximum smoothness, the Medium preset at 154 FPS is also a strong option, though High offers better visuals for a 30 FPS trade-off. The Low preset at 173 FPS is only recommended for players seeking the absolute highest frame rates, as the visual fidelity will be noticeably reduced.

For 3840x2160, the situation is different. The only way to achieve a consistently playable frame rate is to use the Low preset, which averages 75 FPS. The Medium preset at 55 FPS is borderline, and the High (41 FPS) and Ultra (30 FPS) presets are not recommended for a smooth experience. The data suggests that 4K gaming with this combo requires significant compromises in visual settings, making 1440p the sweet spot for this hardware. The best experience is clearly at 1440p High, offering a high frame rate with good visual detail.

How This Combo Ranks

The combination of the Ryzen 5 5600F and the RX 9060 ranks 1794 out of 2913 tested combos for Outriders. This places it in the 62nd percentile, meaning it outperforms about 62% of all tested systems. This is a respectable ranking, indicating that the hardware is well-matched for the game's requirements, though it is not a top-tier performer. The rank reflects the GPU's position as a mid-range card; the RX 9060's benchmark scores place it in the 59th percentile of all GPUs, and it is slightly slower than the RTX 3060 Ti.

The CPU, however, ranks much higher. The Ryzen 5 5600F is in the 85th percentile of all CPUs, with an average benchmark score of 36945. This is nearly identical to its nearest rivals, such as the Intel Core Ultra 5 225 (36938) and the AMD Ryzen 5 5500X3D (37018), with performance deltas of 0% and -0.2%, respectively. This suggests that the CPU is not the limiting factor in this combo. The 1794 rank is therefore more indicative of the GPU's performance ceiling. In essence, this pairing is a strong mid-range system that will handle the game well at 1080p and 1440p, but the rank reflects that it is not competitive with high-end builds for 4K gaming.

The data implies that if a user were to upgrade the GPU while keeping the CPU, the combo's rank would improve significantly. The CPU has the headroom to support a more powerful graphics card, as its performance is not a bottleneck at the tested settings. The ranking is a useful metric to show where this system stands, but it is heavily weighted by the GPU's capabilities.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor from the 5000 series, based on the Zen 3 architecture. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz. Its 32 MB of shared L3 cache and 65W TDP are typical for a mid-range desktop CPU. In Outriders, a game that is not typically CPU-intensive, this processor provides a strong foundation. Its benchmark scores are excellent, with a Passmark multithread score of 19236 and a single-thread score of 2872. The CPU's 85th percentile ranking and its performance parity with rivals like the Intel Core i9-12900T (deltaPct of -0.5%) confirm that it is a high-performing part.

In this specific game, the CPU's role is to feed the GPU with data. The measured FPS at 1080p shows that the CPU is capable of handling high frame rates. At 1920x1080 Low, the system achieves 173 FPS, and at Medium it reaches 154 FPS. These high numbers suggest that the CPU is not a bottleneck at these settings. The CPU's 6 cores and 12 threads are sufficient for Outriders' engine, which is likely optimized for fewer threads.

The data points to the GPU being the primary constraint. As resolution increases from 1080p to 4K, the FPS drops, but this is due to the GPU's rendering load, not the CPU. The CPU's performance metrics, such as its Passmark physics score of 1043, indicate it can handle the game's physics and AI calculations without issue. The Ryzen 5 5600F is a capable partner for the RX 9060, ensuring that the GPU is the limiting factor. This is a healthy balance for a gaming system, as it allows the user to upgrade the GPU later without needing to change the CPU for this game.

Measured FPS Breakdown

The measured FPS data provides a detailed look at performance across all settings and resolutions. At 1920x1080, the results are as follows:

  • Low: 173 FPS average
  • Medium: 154 FPS average (min 131, max 177)
  • High: 124 FPS average
  • Ultra: 90 FPS average

At 2560x1440, the performance scales down:

  • Low: 144 FPS average
  • Medium: 104 FPS average (min 89, max 120)
  • High: 78 FPS average
  • Ultra: 57 FPS average

At 3840x2160, the GPU is heavily taxed:

  • Low: 75 FPS average
  • Medium: 55 FPS average (min 46, max 63)
  • High: 41 FPS average
  • Ultra: 30 FPS average

These numbers show a consistent pattern. The difference between Low and Medium is significant at all resolutions (19 FPS at 1080p, 40 FPS at 1440p, and 20 FPS at 4K). The jump from Medium to High is also steep, particularly at 1080p (30 FPS drop). The step from High to Ultra is the most punishing, with a 34 FPS drop at 1080p and a 21 FPS drop at 1440p. The data shows that the Ultra preset is designed for high-end hardware and is not well-suited for this GPU, especially at higher resolutions.

The minimum FPS values provided for the Medium preset show some frame time variance. At 1080p, the minimum is 131 FPS, which is still very smooth. At 1440p, the minimum is 89 FPS, which is close to the 90 FPS average of the 1080p Ultra setting. At 4K, the minimum is 46 FPS, which can lead to noticeable stutters. This variance is important for understanding the gameplay experience, as average FPS can mask occasional drops.

Resolution Scaling

The FPS scaling from 1080p to 4K clearly identifies the GPU as the limiting component. Moving from 1920x1080 to 2560x1440 on High settings, the FPS drops from 124 to 78, a reduction of 37%. Moving from 1440p to 4K (3840x2160) on the same settings, the FPS drops from 78 to 41, a reduction of 47%. This non-linear drop is expected, as the pixel count increases by 78% from 1080p to 1440p and by another 125% from 1440p to 4K.

The data shows that the CPU is not the bottleneck because the FPS scales with resolution. If the CPU were the limiting factor, the FPS would remain similar across resolutions. Instead, the FPS drops dramatically, which is the signature of a GPU-bound scenario. The RX 9060's memory bandwidth of 288.0 GB/s and 8 GB VRAM are likely the key constraints at higher resolutions.

The scaling also shows that the gap between Low and Ultra settings widens at higher resolutions. At 1080p, the difference between Low and Ultra is 83 FPS (173 vs 90). At 1440p, the difference is 87 FPS (144 vs 57). At 4K, the difference is 45 FPS (75 vs 30). This suggests that at 4K, the GPU is so overloaded that the settings have a relatively smaller impact on the absolute FPS, as the card is near its limits. The data implies that for the best experience, users should stick to 1440p or 1080p, where the GPU has enough headroom to show meaningful differences between settings. At 4K, the GPU is simply overwhelmed, and even the Low preset yields a lower FPS than the Ultra preset does at 1440p. This confirms that the RX 9060 is not a 4K gaming card for this title.

Hardware Specifications

AMD Ryzen 5 5600F

Cores / Threads 6 / 12
Base Clock 3000 MHz
Boost Clock 4000 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2990 MHz MHz
TDP 132 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5600F + AMD Radeon RX 9060 in Outriders

Resolution Settings Avg FPS
3840x2160 Low 75.0
3840x2160 Medium 55.0
3840x2160 High 41.0
3840x2160 Ultra 30.0
2560x1440 Low 144.0
2560x1440 Medium 104.0
2560x1440 High 78.0
2560x1440 Ultra 57.0
1920x1080 Low 173.0
1920x1080 Medium 154.0
1920x1080 High 124.0
1920x1080 Ultra 90.0

Outriders with Ryzen 5 5600F + Other GPUs

See how Outriders performs with the same CPU but different graphics cards.

Outriders with RX 9060 + Other CPUs

See how Outriders performs with the same GPU but different processors.

Other Games with Ryzen 5 5600F + RX 9060

Explore FPS benchmarks for other games using this same hardware combination.