Archeage

The AMD Ryzen 5 5600F and AMD Radeon RX 9060 combination delivers a playable but not flawless experience in Archeage, with performance that scales predictably across resolutions and settings. The data shows a system that is well-balanced for 1080p and 1440p gaming, but which struggles to maintain high frame rates at 4K, particularly at higher presets.

Resolution Scaling

The measured frame rates reveal a clear and significant impact from resolution scaling. At 1080p with High settings, the combo achieves an average of 86 FPS. Moving to 1440p at the same High preset drops performance to 58 FPS, a reduction of approximately 33%. The jump to 4K at High settings further reduces the average to 33 FPS, which is a 62% decrease from the 1080p result. This pattern indicates that the GPU is the primary limiting factor at higher resolutions, as the workload on the render pipeline increases dramatically.

The scaling from 1440p to 4K is particularly steep. At Medium settings, the average frame rate falls from 85 FPS at 1440p to 49 FPS at 4K, a drop of 42%. Even at Low settings, where the CPU typically plays a larger role, the transition from 1440p (95 FPS) to 4K (55 FPS) represents a 42% loss. This suggests that the RX 9060’s 8 GB of VRAM and 128-bit memory bus become bottlenecks when pushing the higher pixel counts, as the data shows the card cannot sustain the same throughput at 4K.

Interestingly, the gap between Low and Ultra settings widens as resolution increases. At 1080p, Low yields 142 FPS while Ultra yields 58 FPS, a difference of 84 FPS. At 4K, Low yields 55 FPS while Ultra yields 23 FPS, a difference of only 32 FPS. This compression of the settings range at 4K implies that the GPU is so heavily loaded that even reducing graphical fidelity cannot fully compensate for the raw pixel throughput required, leading to a situation where the frame rate is capped by the hardware’s memory bandwidth and pixel rate rather than by the preset’s complexity.

The 1440p data points show a more balanced behaviour. The difference between Medium (85 FPS) and High (58 FPS) is 27 FPS, while the difference between High and Ultra (39 FPS) is 19 FPS. This suggests that at 1440p, the system has enough headroom to respond to settings changes, but the Ultra preset still demands a significant performance cost that pushes the experience below the 60 FPS threshold.

Settings Recommendations

For the best balance of visual fidelity and performance, the Medium preset at 1440p stands out as the optimal choice. The measured 85 FPS average with a minimum of 72 FPS and a maximum of 98 FPS indicates a smooth and consistent experience that stays comfortably above the 60 FPS target for most gameplay. This is a 46% improvement over High settings at the same resolution, making it a clear winner for players who prioritize frame rate stability.

At 1080p, the Medium preset also delivers excellent results with an average of 126 FPS, a minimum of 107 FPS, and a maximum of 145 FPS. This makes it the highest-performing preset that still maintains a minimum frame rate above 100 FPS, ensuring no noticeable hitches in crowded MMORPG environments. The High preset at 1080p, with its 86 FPS average, is acceptable but leaves performance on the table compared to Medium.

The Ultra preset is not recommended for any resolution. At 1080p it drops to 58 FPS, at 1440p it falls to 39 FPS, and at 4K it becomes nearly unplayable at 23 FPS. The data shows that the jump from High to Ultra carries a substantial performance penalty of 28 FPS at 1080p and 19 FPS at 1440p, without any indication of a proportional visual gain in the benchmark results. Players should avoid Ultra unless they accept a sub-60 FPS experience.

For 4K gaming, the Low preset is the only viable option, yielding an average of 55 FPS. While this is playable, it is not ideal for a competitive or visually demanding MMORPG. The Medium preset at 4K drops to 49 FPS with a minimum of 41 FPS, which risks noticeable stuttering during large-scale battles. The data suggests that 4K is not a strong use case for this combo, and players should either lower expectations to Low settings or step down to 1440p Medium for a superior experience.

How This Combo Ranks

The combination of the Ryzen 5 5600F and the RX 9060 ranks at position 2174 out of 3708 tested combinations in Archeage. This places it in the 41st percentile of all combos, meaning it outperforms roughly 41% of tested systems while being outperformed by the majority. This mid-pack ranking is consistent with a hardware pairing that is competent but not top-tier, reflecting the GPU’s 59th percentile ranking among all GPUs and the CPU’s 85th percentile ranking among all CPUs.

The rank suggests that while the CPU is a strong performer, the GPU holds the combo back from reaching higher positions. The RX 9060’s nearest rivals include the NVIDIA GeForce RTX 3060 Ti with a deltaPct of -0.7, meaning the RTX 3060 Ti scores 0.7% lower on average, and the AMD Radeon RX 7700 with a deltaPct of 1, meaning the RX 9060 scores 1% higher. This tight grouping indicates that the RX 9060 is competitive with these cards, but none of them are high-end solutions, which explains the combo’s overall mid-tier placement.

The CPU’s nearest rivals show a similarly tight cluster. The Intel Core Ultra 5 225 scores 0% different, the AMD Ryzen 5 5500X3D scores -0.2% lower, and the AMD Ryzen AI 7 PRO 450 scores -0.4% lower. This suggests that the 5600F is performing exactly as expected for its class, and the combo’s rank is not being dragged down by any CPU deficiency. Instead, the data indicates that the limiting factor is the GPU’s ability to handle the game’s rendering demands at higher resolutions.

FAQ

Q: What is the highest average frame rate this combo achieves in Archeage?

A: The highest measured average frame rate is 142 FPS, achieved at 1920x1080 resolution with Low settings. The Medium preset at the same resolution yields 126 FPS, which is the highest average for a preset that maintains a minimum frame rate above 100 FPS.

Q: Can this system handle 4K gaming in Archeage?

A: The data shows that 4K gaming is possible but not ideal. At Low settings, the average frame rate is 55 FPS, which is playable. However, at Medium settings, the average drops to 49 FPS with a minimum of 41 FPS, and at High settings, it falls to 33 FPS. The Ultra preset is not playable at 23 FPS.

Q: How does the RX 9060 compare to its nearest rival, the RTX 3060 Ti?

A: The RX 9060 has an average benchmark score of 16014, while the RTX 3060 Ti has an average score of 16129. This gives a deltaPct of -0.7, meaning the RX 9060 performs 0.7% lower than the RTX 3060 Ti in synthetic benchmarks. In practical terms, the two cards are nearly identical in raw performance.

Q: Is the Ryzen 5 5600F a bottleneck for the RX 9060 in this game?

A: The benchmark data does not suggest a CPU bottleneck. The CPU ranks in the 85th percentile of all CPUs, and its nearest rivals show deltaPct values between -0.5% and 0%. The frame rate drops from 1080p to 4K are consistent with GPU limitations, indicating the CPU is not the primary constraint.

Q: What is the best settings preset for a 60 FPS experience at 1440p?

A: The Medium preset at 1440p delivers an average of 85 FPS with a minimum of 72 FPS, which is the only preset that maintains a minimum above 60 FPS at this resolution. The High preset averages 58 FPS, which falls below the 60 FPS target.

Q: How does the combo rank among all tested systems in Archeage?

A: The combo ranks 2174 out of 3708 tested combinations. This places it in the 41st percentile, meaning it performs better than 41% of all tested combos but worse than the majority.

GPU Role

The AMD Radeon RX 9060 is built on the RDNA 4.0 architecture and features 8 GB of GDDR6 memory on a 128-bit bus, providing a memory bandwidth of 288.0 GB/s. The GPU has a base clock of 1700 MHz, a game clock of 2400 MHz, and a boost clock of 2990 MHz, with a memory clock of 2250 MHz (18 Gbps effective). These specifications position the card as a mid-range solution, and the benchmark data confirms this assessment.

The GPU’s 8 GB VRAM is a critical factor in Archeage’s performance. At 4K resolution, the card’s average frame rate drops to 33 FPS at High settings, and even at Low settings, it only reaches 55 FPS. This suggests that the memory capacity and bandwidth are insufficient for the higher pixel workloads, as the card cannot maintain the same throughput as it does at lower resolutions. The 128-bit bus width, which is narrower than many competing cards, likely contributes to this limitation.

The card’s 64 ROPs and 112 TMUs provide a texture rate of 334.9 GTexel/s and a pixel rate of 191.4 GPixel/s. These figures are modest for modern standards, and the data shows that the card’s performance in Archeage is consistent with its synthetic benchmark scores. The GPU ranks in the 59th percentile of all GPUs, with an average benchmark score of 16014, placing it just below the RTX 3060 Ti and just above the RX 7700. This mid-tier positioning explains why the combo struggles at 4K Ultra, where the 23 FPS average indicates the card is heavily overburdened.

The 21.43 TFLOPS FP32 performance and the 1:1 FP16 ratio show that the card has decent compute capabilities, but these are not leveraged significantly in this MMORPG, which is more dependent on rasterization and memory throughput. The card’s PCIe 5.0 x16 interface ensures it can communicate with the CPU without bandwidth limitations, but the bottleneck remains the GPU’s own memory subsystem.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 65 W TDP. The CPU features 32 MB of shared L3 cache, 512 KB of L2 cache per core, and 64 KB of L1 cache per core. This configuration is typical for a mid-range desktop processor, and its performance in Archeage reflects this.

The CPU’s benchmark scores show strong single-thread and multi-thread performance. It achieves a passmark single-thread score of 2872 and a passmark multi-thread score of 19236, with an average benchmark score of 36945. This places the CPU in the 85th percentile of all CPUs, indicating it is a capable processor for gaming workloads. In Archeage, which is an older MMORPG that may not utilize many cores, the single-thread performance is particularly important, and the 5600F’s 2872 score suggests it can handle the game’s main thread efficiently.

The CPU’s nearest rivals include the Intel Core Ultra 5 225 with a deltaPct of 0%, the AMD Ryzen 5 5500X3D with a deltaPct of -0.2%, and the AMD Ryzen AI 7 PRO 450 with a deltaPct of -0.4%. This tight grouping indicates that the 5600F is performing exactly as expected for its class, with no anomalous behavior. The CPU’s 6 cores and 12 threads are sufficient for the game, and the data does not show any CPU-related frame rate drops in the measured results.

The CPU’s memory support is DDR4 with a dual-channel bus and a memory bandwidth of 51.2 GB/s. This is a standard configuration for the AM4 platform, and the data suggests it is not a limiting factor in this game. The CPU’s PCIe Gen 4 support with 20 lanes ensures that the RX 9060 can run at full bandwidth, but the benchmark results indicate that the GPU is the primary constraint at higher resolutions. At 1080p Low, the 142 FPS average shows the CPU can keep up with the GPU’s output, but at 4K, the frame rates are dictated by the GPU’s rendering capabilities rather than the CPU’s processing power.