Minimum

The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 5070 Ti combination delivers a distinct performance profile in Minimum, a 2014 third-person shooter. The measured data shows a system capable of high frame rates, but the scaling patterns across resolutions and settings reveal a clear division of labor between the CPU and GPU. At 1080p, the processor is the primary driver; at 4K, the graphics card takes over. This analysis breaks down the measured FPS data, examines the hardware roles, and provides settings recommendations based strictly on the observed benchmarks.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings, indicating a predictable shift in bottleneck. At Low settings, the average FPS falls from 340.1 at 1920x1080 to 116 at 3840x2160, a reduction of approximately 65.9%. At High settings, the drop is from 222.2 to 77.7, a 65.0% decrease. This consistent proportional decline suggests that the GPU is the limiting factor at higher resolutions, as the rendering workload scales with pixel count.

The data shows that the RTX 5070 Ti is fully utilized as resolution increases. The gap between Low and Ultra settings at 1080p is substantial — 340.1 versus 165.8 FPS — but at 4K, this gap narrows significantly to just 116 versus 60.1 FPS. This compression of the settings spread at 4K is a classic sign of GPU saturation. When the GPU is the bottleneck, lowering settings yields diminishing returns because the core rendering cost of each frame at 4K is already high. Conversely, at 1080p, the GPU is less stressed, and the CPU becomes more relevant, as evidenced by the massive frame rates that exceed typical display refresh rates.

FAQ

Q: What is the maximum average frame rate achieved by this combo?

A: The highest recorded average FPS is 340.1, achieved at 1920x1080 resolution with Low settings.

Q: How does the CPU compare to its closest rival in synthetic benchmarks?

A: The Ryzen 7 5800X3D has an average benchmark score of 26574, which is 0.1% higher than the Intel Core i9-11900K and 0.1% lower than the AMD EPYC 8024P, indicating near-identical synthetic performance.

Q: What is the GPU's performance ranking relative to all other graphics cards?

A: The RTX 5070 Ti sits in the 87th percentile among all GPUs, with an average benchmark score of 52086.

Q: Which settings preset provides the highest frame rate at 2560x1440?

A: The Low preset yields the highest average FPS at 2560x1440, with a measured 217.8 FPS.

Q: Is there a significant performance difference between the RTX 5070 Ti and the RTX 4080?

A: The data shows they are effectively tied. The RTX 5070 Ti has an average benchmark score of 52086, while the RTX 4080 scores 52085, resulting in a deltaPct of 0.0.

Q: Does the CPU's memory bandwidth play a role in this game's performance?

A: The CPU supports DDR4 memory with a bandwidth of 51.2 GB/s, which is a specification of the platform; the measured FPS data does not isolate the impact of memory bandwidth specifically.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the dominant component at higher resolutions. Its 16 GB of GDDR7 memory on a 256-bit bus provides a bandwidth of 896.0 GB/s, which is ample for the textures and assets in Minimum. The GPU's boost clock is 2452 MHz, and its base clock is 2295 MHz. These clocks, combined with the architecture's 8960 shading units, drive the raw rendering throughput.

The benchmark results show that the RTX 5070 Ti is the limiting factor at 4K. At 3840x2160, the average FPS ranges from 60.1 on Ultra to 116 on Low. The GPU's 87th percentile ranking among all GPUs and its near-identical score to the RTX 4080 (52086 vs. 52085) place it in the upper echelon of graphics hardware. However, even this level of performance cannot push Minimum past 120 FPS at 4K on Ultra settings. The data indicates that the GPU’s raw compute is the primary constraint at this resolution, as the performance gap between settings presets is relatively modest, suggesting the workload is already heavy regardless of quality level.

Measured FPS Breakdown

The measured data provides a clear matrix of performance across three resolutions and four settings presets.

At 1920x1080, the system is exceptionally fast. The Low preset produces 340.1 FPS, Medium 259.6 FPS, High 222.2 FPS, and Ultra 165.8 FPS. These numbers suggest that at this resolution, the combination of the 5800X3D and RTX 5070 Ti is capable of exceeding the refresh rates of most high-end monitors, even on the highest quality settings.

Moving to 2560x1440, the frame rates remain high but show a noticeable drop. The Low preset averages 217.8 FPS, Medium 166.1 FPS, High 143.4 FPS, and Ultra 109.5 FPS. The scaling from 1080p to 1440p shows a reduction of roughly 36% for Low settings (340.1 to 217.8) and 35% for High settings (222.2 to 143.4), indicating a proportional increase in GPU workload.

At 3840x2160, the performance becomes more demanding. The Low preset averages 116 FPS, Medium 92 FPS, High 77.7 FPS, and Ultra 60.1 FPS. The drop from 1440p to 4K is significant, with the High preset falling from 143.4 to 77.7 FPS, a 45.8% decrease. This demonstrates that 4K resolution is where the GPU’s limits are most apparent, with the Ultra preset barely maintaining a 60 FPS average.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on the target resolution and refresh rate.

For 1440p displays with a 144Hz refresh rate, the High preset at 2560x1440 provides an average of 143.4 FPS, which nearly saturates the display's capability. The Ultra preset at this resolution drops to 109.5 FPS, which is still playable but may not fully utilize a 144Hz panel. For users prioritizing smoothness over maximum visual fidelity, High is the recommended setting at 1440p, as it offers a better frame rate per the measured data.

At 1080p, the High preset provides 222.2 FPS, and Ultra provides 165.8 FPS. Both are well above 144Hz, so the choice between them is purely visual. The data suggests that Ultra is viable at 1080p without sacrificing competitive frame rates.

At 4K, the situation is more nuanced. The Ultra preset at 60.1 FPS is the only one that dips below the 60 FPS threshold, which may be a concern for some users. For a consistent 60+ FPS experience at 4K, the High preset, with an average of 77.7 FPS, is the safest choice. The Medium preset at 92 FPS offers a significant performance headroom if High is still too demanding for a particular scene.

CPU Role

The AMD Ryzen 7 5800X3D is a critical component for achieving the high frame rates seen at 1080p. With 8 cores and 16 threads based on the Zen 3 architecture, its boost clock is 4.50 GHz. The processor’s distinguishing feature is its large 96 MB of shared L3 cache, which helps reduce memory latency. Its benchmark scores are substantial: a Cinebench R23 multicore score of 24063 and a single-core score of 3397.

The CPU's role becomes apparent when analyzing the FPS data at 1080p. At this resolution, the GPU is not fully saturated, allowing the CPU to dictate the maximum frame rate. The jump from High (222.2 FPS) to Low (340.1 FPS) at 1080p is a 53% increase, which is a larger relative gain than the 49% increase seen at 1440p (143.4 to 217.8 FPS) or the 49% increase at 4K (77.7 to 116 FPS). This pattern suggests that at 1080p, the CPU is able to feed the GPU with enough data to hit very high frame rates, but its performance ceiling is still a factor in the overall result.

The 5800X3D's 83rd percentile ranking among all CPUs places it above the majority of processors. Its nearest rival, the Intel Core i9-11900K, has a nearly identical average benchmark score (26546 vs. 26574), confirming that the 5800X3D is a top-tier gaming CPU for this generation. The data indicates that while the GPU is the bottleneck for 4K performance, the 5800X3D provides a solid foundation for high-refresh-rate 1080p and 1440p gaming in Minimum.