Minimum

The AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce RTX 4060 delivers a distinctive performance profile in Minimum, a 2014 third-person shooter. The data shows a system that scales in a predictable, resolution-dependent manner, with the CPU providing a robust foundation that allows the GPU's capabilities to be the primary differentiator across settings. This analysis examines the measured FPS across three resolutions and four quality presets, interpreting what the numbers reveal about the balance of this specific hardware combination.

Resolution Scaling

The measured FPS data reveals a clear and consistent pattern of performance degradation as resolution increases, indicating a shift in the system's bottleneck. At 1920x1080, the combination is exceptionally strong, with the Ultra preset achieving 99 FPS and the Low preset hitting 202 FPS. This suggests that at 1080p, the workload is light enough for both the CPU and GPU to operate without significant constraint, though the high frame rates on Low indicate the CPU is feeding frames efficiently.

Moving to 2560x1440, the data shows a substantial drop across all settings, with the Ultra preset falling from 99 FPS to 64 FPS, a 35 FPS reduction. The High preset sees a similar proportional decline, dropping from 130 FPS to 84 FPS. This scaling suggests that the GPU is becoming the primary limiting factor at this resolution, as the increased pixel count demands more from the RTX 4060's 8 GB of memory and 272.0 GB/s bandwidth. The Medium preset at 1440p shows a 100 FPS average with a minimum of 85 FPS, indicating that while the GPU is working harder, the frame pacing remains stable.

At 3840x2160, the performance envelope tightens considerably. The Ultra preset drops to 34 FPS, which is only 34% of the 1080p Ultra score, highlighting the immense pressure on the GPU. The Low preset at 4K achieves 70 FPS, which is still playable but represents a 132 FPS drop from the 1080p Low score of 202 FPS. This dramatic scaling from 1080p to 4K confirms that the RTX 4060, with its 128-bit memory bus, is the dominant constraint at higher resolutions. The CPU, with its 96 MB of shared L3 cache and 8 cores, appears to have ample headroom, as the frame rate drops are more closely tied to pixel throughput than to processor limitations.

The data implies that this combo is best suited for 1080p and 1440p gaming, where the CPU's strength can be fully utilized to achieve high frame rates. At 4K, the system struggles to maintain smooth performance on higher presets, suggesting that users would need to rely on the Low or Medium settings to achieve a playable experience, with the Medium preset showing a 54 FPS average and a 46 FPS minimum.

How This Combo Ranks

In the broader context of tested hardware combinations, this specific pairing holds a rank of 2000 out of 3712 combos for Minimum. This places it in the 54th percentile of all tested systems, indicating that while it is not a top-tier performer, it sits comfortably above the median. This ranking is a reflection of the balance between the CPU and GPU, where the Ryzen 7 5800X3D provides a strong single-threaded foundation, but the RTX 4060's mid-range positioning caps the overall potential.

The CPU itself ranks in the 80th percentile of all CPUs, with an average benchmark score of 27896. Its nearest rivals include the AMD Ryzen 7 6800U, which has a nearly identical average score of 27887 (0% delta), and the Intel Core i9-10900K, which scores 27872 (0.1% delta). This indicates that the 5800X3D's processing power is competitive with older high-end parts, providing a strong base for gaming workloads. The GPU, however, ranks in the 61st percentile of all GPUs, with an average benchmark score of 17639. Its nearest rivals, such as the AMD Radeon HD 7790 (17666, -0.2% delta), show that the RTX 4060 is positioned in the mid-range segment, which aligns with its measured performance in Minimum.

The disparity between the CPU's high percentile ranking and the GPU's more modest one suggests that the processor is not the limiting factor in this combo. The data implies that upgrading the GPU would yield a more significant improvement in Minimum than upgrading the CPU, as the current GPU is the bottleneck at higher resolutions. The combo's rank of 2000 out of 3712 is a direct consequence of this imbalance, where the CPU's potential is only partially realized due to the GPU's constraints.

FAQ

Q: What is the best resolution for this combo to maintain high frame rates?

A: The data indicates that 1920x1080 is the optimal resolution, with even the Ultra preset achieving 99 FPS. At 2560x1440, the High preset drops to 84 FPS, and at 3840x2160, the High preset falls to 45 FPS, showing a clear degradation as resolution increases.

Q: How does the CPU's performance compare to its rivals in this game?

A: The Ryzen 7 5800X3D has an average benchmark score of 27896, which is nearly identical to the AMD Ryzen 7 6800U (27887) and the Intel Core i9-10900K (27872), with deltas of 0% and 0.1% respectively. This suggests comparable processing power in synthetic tests, though gaming results may vary based on cache and architecture.

*Q: Is the RTX 4060's 8 GB of VRAM sufficient for Minimum at high settings?*

A: The measured FPS shows no signs of VRAM-related stuttering, with the Medium preset at 4K maintaining a 46 FPS minimum. However, the GPU's overall performance at 4K is limited, suggesting that while 8 GB is enough for this game, the memory bandwidth and bus width are more critical factors.

Q: What is the expected frame rate at 1440p with Medium settings?

A: The data shows a 100 FPS average for the Medium preset at 2560x1440, with a minimum of 85 FPS and a maximum of 115 FPS. This indicates stable performance that is well-suited for high-refresh-rate displays.

Q: How does this combo's ranking compare to other tested systems?

A: It ranks 2000 out of 3712 combos for Minimum, placing it in the 54th percentile. This is a mid-pack result, reflecting the GPU's mid-range position despite the CPU's high percentile ranking of 80.

Q: Does lowering settings from Ultra to Low have a linear impact on FPS?

A: No, the impact is not linear. At 1080p, dropping from Ultra (99 FPS) to Low (202 FPS) more than doubles the frame rate, while at 4K, the same change goes from 34 FPS to 70 FPS, also a doubling but with a smaller absolute difference.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system's capabilities across different settings and resolutions. At 1920x1080, the performance is consistently high, with the Low preset achieving an average of 202 FPS. The Medium preset shows a 155 FPS average with a minimum of 131 FPS and a maximum of 178 FPS, indicating stable frame times. The High preset reaches 130 FPS, while the Ultra preset drops to 99 FPS, showing a 103 FPS difference between the lowest and highest quality settings.

At 2560x1440, the performance scales down proportionally. The Low preset maintains a high 130 FPS average, while the Medium preset shows a 100 FPS average with a minimum of 85 FPS and a maximum of 115 FPS. The High preset drops to 84 FPS, and the Ultra preset falls to 64 FPS. This represents a 66 FPS difference between Low and Ultra at this resolution, showing that the GPU is beginning to feel the pressure of increased pixel count.

At 3840x2160, the system's limits become evident. The Low preset achieves 70 FPS, which is the only setting that remains comfortably playable. The Medium preset shows a 54 FPS average with a minimum of 46 FPS and a maximum of 62 FPS, which is borderline for smooth gameplay. The High preset drops to 45 FPS, and the Ultra preset falls to 34 FPS, making these settings less suitable for a responsive experience. The data shows a clear trend: as resolution increases, the gap between settings narrows in relative terms, but the absolute frame rates drop significantly, emphasizing the GPU's role as the bottleneck.

Settings Recommendations

The measured FPS data suggests that the ideal settings depend heavily on the target resolution and desired frame rate. For 1080p, the Ultra preset at 99 FPS is the best choice for users with high-refresh-rate monitors, as it provides the best visual quality without sacrificing playability. The High preset at 130 FPS is also viable for those seeking higher frame rates, while the Low preset at 202 FPS is excessive unless competitive play demands maximum refresh rates.

At 1440p, the Medium preset offers the best balance, with a 100 FPS average and a 85 FPS minimum that ensures smooth gameplay. The High preset at 84 FPS is also acceptable, but the Ultra preset at 64 FPS may introduce noticeable frame drops in fast-paced scenes. For a more consistent experience, the Low preset at 130 FPS provides ample headroom, though it sacrifices visual fidelity.

At 4K, the Low preset at 70 FPS is the only setting that provides a consistently playable experience. The Medium preset at 54 FPS with a 46 FPS minimum may be tolerable for slower gameplay, but the High and Ultra presets, at 45 FPS and 34 FPS respectively, are not recommended for a third-person shooter where responsiveness is key. The data implies that users targeting 4K should accept the Low preset or consider lowering the resolution to 1440p to unlock higher quality settings.

CPU Role

The AMD Ryzen 7 5800X3D is a 5000-series processor with 8 cores and 16 threads, based on the Zen 3 architecture with a 7 nm process node. Its base clock is 3.40 GHz, boosting to 4.50 GHz, and it features a substantial 96 MB of shared L3 cache, which is a key differentiator for gaming performance. The CPU's TDP is 105 W, and it supports DDR4 memory with a dual-channel bus, providing a memory bandwidth of 51.2 GB/s.

In Minimum, the CPU's role is to feed the GPU with frame data, and the benchmark results indicate it does this effectively. The 3DMark 16-thread score of 7299 and the max-thread score of 7285 show strong multi-threaded performance, while the single-thread score of 884 is solid for older games that may rely on fewer cores. The Cinebench R23 multicore score of 14317 and single-core score of 1452 further confirm the CPU's capability to handle the game's logic and physics.

The data suggests that the CPU is not the limiting factor in this combo, as evidenced by the high frame rates at 1080p, where the processor's cache and clock speeds allow the GPU to run at its full potential. The CPU's 80th percentile ranking among all CPUs, with an average benchmark score of 27896, places it in a strong position relative to its rivals, including the Intel Core i9-10900K (27872) and the AMD Ryzen 7 6800U (27887). This indicates that the 5800X3D provides a solid foundation for Minimum, and any performance limitations at higher resolutions are attributable to the GPU rather than the processor.

GPU Role

The NVIDIA GeForce RTX 4060 is a GeForce 40-series GPU based on the Ada Lovelace architecture, manufactured on a 5 nm process. It features 3072 shading units, 96 TMUs, and 48 ROPs, with a base clock of 1830 MHz and a boost clock of 2460 MHz. The GPU has 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 272.0 GB/s. Its TDP is 115 W, and it uses a PCIe 4.0 x8 interface.

In Minimum, the GPU is the primary determinant of performance at higher resolutions. The data shows that at 1080p, the GPU can deliver high frame rates, with the Low preset reaching 202 FPS, but as resolution increases, the GPU's limitations become apparent. The 128-bit memory bus and 8 GB of VRAM are sufficient for this game, but the pixel fill rate and texture rate, at 118.1 GPixel/s and 236.2 GTexel/s respectively, contribute to the frame rate drops observed at 1440p and 4K.

The GPU's benchmark scores, such as the Passmark G3D score of 19545 and the 3DMark Steel Nomad DX12 score of 2302, place it in the 61st percentile of all GPUs, with an average score of 17639. Its nearest rivals, including the AMD Radeon HD 7790 (17666) and the AMD Radeon 780M (17588), show that the RTX 4060 is a mid-range part. This positioning is reflected in the 4K performance, where the High preset struggles to maintain 45 FPS, indicating that the GPU is not designed for high-resolution gaming on demanding settings. The data implies that for Minimum, the RTX 4060 is best utilized at 1080p or 1440p, where it can deliver smooth frame rates without being overwhelmed by pixel throughput demands.