Barony

The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 4060 combination delivers remarkably high frame rates in Barony, positioning itself in the top 58% of tested configurations. The data reveals a system where the GPU becomes the primary scaling factor at higher resolutions, while the CPU's strengths are fully exposed only at 1080p.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent across all settings presets, indicating that the RTX 4060 is the limiting component at higher resolutions. At Low settings, the average frame rate falls from 340.1 FPS at 1920x1080 to 216.3 FPS at 2560x1440, a reduction of 123.8 FPS, before settling at 110.2 FPS at 3840x2160. This represents a 67.6% decrease from 1080p to 4K at Low settings.

The scaling pattern becomes more pronounced at higher quality presets. With High settings, the drop from 216.5 FPS at 1080p to 138.3 FPS at 1440p is 78.2 FPS, and further declines to 71.8 FPS at 4K. Ultra settings show the most dramatic falloff: 154.2 FPS at 1080p, 99 FPS at 1440p, and only 48.6 FPS at 4K. This translates to a 68.5% reduction from 1080p to 4K at Ultra, suggesting that the GPU's pixel throughput capacity is heavily taxed by the combination of high resolution and intensive settings.

The 1440p to 4K transition is particularly punishing. At Medium settings, the drop from 160.4 FPS to 82.8 FPS represents a 48.4% loss. At High settings, the loss is 48.1%. This consistency across presets points to pure resolution overhead rather than settings-driven complexity. The data indicates that 1080p is firmly CPU-bound territory, while 4K is almost entirely GPU-limited. The 5800X3D's 8 cores and 16 threads appear sufficient to feed the RTX 4060 at lower resolutions, but the GPU's 8 GB memory and 128-bit bus become the bottleneck as pixel count rises.

GPU Role

The RTX 4060's specifications directly explain its behavior in Barony. With 3072 shading units, 96 texture mapping units, and 48 raster output units, the card is a mid-range part that must work harder as resolution increases. Its boost clock of 2460 MHz provides the raw compute headroom for the exceptional 1080p results, where the card achieves 340.1 FPS at Low settings. The 8 GB of GDDR6 memory on a 128-bit bus delivers 272.0 GB/s of bandwidth, which becomes a limiting factor at 4K Ultra where frame rates dip to 48.6 FPS.

The GPU's benchmark scores reinforce its performance tier. With a PassMark G3D score of 19545 and an average benchmark score of 23181, the RTX 4060 sits at the 66th percentile among all GPUs. Its nearest rivals include the AMD Radeon RX 6600M, which scores 23321 (0.6% higher), and the Intel Arc B580 at 23021 (0.7% lower). This competitive positioning explains why the card delivers playable but not exceptional 4K performance in Barony, while excelling at 1080p.

The card's DirectX 12 Ultimate support (12_2) and DirectX 12 PassMark score of 76 indicate modern API readiness, though Barony's roguelike nature likely favors simpler rendering paths. The 15.11 TFLOPS FP32 throughput is adequate for the game's visual demands, but the 48.6 FPS at 4K Ultra suggests the card is hitting architectural limits rather than driver or API inefficiencies. The 115 W TDP and 300 W suggested PSU rating indicate a power-efficient design that does not throttle under sustained load.

CPU Role

The AMD Ryzen 7 5800X3D brings substantial processing power to this pairing, and its influence is most visible at 1080p where frame rates exceed 300 FPS. With 8 cores and 16 threads based on Zen 3 architecture, the CPU's 96 MB of shared L3 cache is a standout feature for gaming workloads. The base clock of 3.40 GHz boosts to 4.50 GHz, providing the single-thread performance that Barony's roguelike simulation logic likely requires.

The CPU's benchmark results place it in the 83rd percentile among all processors, with an average benchmark score of 26574. Its Cinebench R23 multicore score of 24063 and single-core score of 3397 demonstrate balanced performance across both heavily threaded and lightly threaded workloads. The 3DMark results show strong scaling: 7299 at 16 threads, 5906 at 8 threads, 3392 at 4 threads, and 884 at single thread. This scaling pattern suggests the CPU can handle Barony's multi-threaded game logic without bottlenecking the GPU.

In the nearest rival comparison, the 5800X3D trades blows with the Intel Core i9-11900K (deltaPct of 0.1% in both directions) and the AMD Ryzen 5 7600 (0.2% faster). The AMD EPYC 8024P also matches within 0.1%. This clustering indicates that the 5800X3D's performance is not exceptional but is competitive with modern mid-range and previous-generation high-end parts. For Barony specifically, the CPU's 16 threads ensure that the game's background simulation, pathfinding, and procedural generation tasks do not starve the rendering pipeline, even at 340.1 FPS at 1080p Low.

Settings Recommendations

The measured data strongly favors Medium settings as the best balance of visual quality and frame rate. At 1080p, Medium delivers 250.8 FPS, which is 90.1 FPS below Low but 96.6 FPS above High's 216.5 FPS. The jump from Medium to High costs 34.3 FPS, while the jump from Low to Medium costs 89.3 FPS. This suggests that Medium captures most of the visual improvements over Low without incurring the steep penalty that High introduces.

At 1440p, Medium's 160.4 FPS remains well above the 144 Hz refresh rate that many monitors support, while High's 138.3 FPS is still playable but closer to the edge. At 4K, Medium's 82.8 FPS is the highest preset that maintains a stable 60 FPS experience, while High's 71.8 FPS is borderline and Ultra's 48.6 FPS drops below the 60 FPS threshold. For players prioritizing smoothness at 4K, Low at 110.2 FPS is the only preset that offers substantial headroom.

Ultra settings are difficult to justify given the data. At every resolution, Ultra delivers the lowest frame rates: 154.2 FPS at 1080p, 99 FPS at 1440p, and 48.6 FPS at 4K. The gap between High and Ultra is consistent (62.3 FPS at 1080p, 39.3 FPS at 1440p, 23.2 FPS at 4K), indicating that Ultra's additional effects carry a heavy cost that may not be visually justified. Medium is the recommended preset for most users, with High serving as a viable option for those with 1080p or 1440p displays who prefer maximum visual fidelity.

FAQ

Q: What frame rate can I expect at 1080p with Medium settings?

A: The measured average frame rate is 250.8 FPS, which is 89.3 FPS higher than Low and 34.3 FPS lower than High, making it the strongest balance of performance and quality.

Q: Is 4K gaming viable with this combination?

A: Yes, but only at Low or Medium settings. Low delivers 110.2 FPS, Medium delivers 82.8 FPS, and High drops to 71.8 FPS. Ultra at 48.6 FPS falls below the 60 FPS playability threshold.

Q: How does the RTX 4060 compare to its nearest rival, the Intel Arc B580?

A: The RTX 4060's average benchmark score is 23181, while the Arc B580 scores 23021. This puts the RTX 4060 0.7% ahead of the Arc B580 in synthetic benchmarks.

Q: What is the CPU's single-thread performance, and why does it matter for Barony?

A: The 5800X3D scores 3397 in Cinebench R23 single-core and 884 in 3DMark single-thread. These scores indicate strong per-core performance that supports the 340.1 FPS observed at 1080p Low, where CPU speed is the primary limiter.

Q: Does the 5800X3D bottleneck the RTX 4060 at any resolution?

A: At 1080p, the CPU appears to be the limiting factor, as frame rates exceed 216 FPS even at High settings. At 1440p and 4K, the GPU becomes the bottleneck, with the 8 GB memory and 128-bit bus constraining performance.

Q: What is the performance difference between High and Ultra settings at 1440p?

A: High averages 138.3 FPS, while Ultra averages 99 FPS, a difference of 39.3 FPS. This indicates that Ultra's visual enhancements carry a 28.4% performance penalty over High at this resolution.

Measured FPS Breakdown

At 1920x1080, the full range of settings shows the CPU's dominance. Low settings achieve 340.1 FPS, Medium reaches 250.8 FPS, High delivers 216.5 FPS, and Ultra drops to 154.2 FPS. The spread from Low to Ultra is 185.9 FPS, demonstrating that settings have a massive impact on performance at this resolution.

The 2560x1440 results show a compressed but still substantial spread. Low averages 216.3 FPS, Medium 160.4 FPS, High 138.3 FPS, and Ultra 99 FPS. The difference between Low and Ultra is 117.3 FPS, and notably, the gap between High and Ultra (39.3 FPS) is larger than the gap between Medium and High (22.1 FPS), suggesting that Ultra's incremental effects are disproportionately expensive.

At 3840x2160, the GPU's limits are fully exposed. Low delivers 110.2 FPS, Medium 82.8 FPS, High 71.8 FPS, and Ultra 48.6 FPS. The total spread narrows to 61.6 FPS, and the difference between Medium and High is only 11 FPS, while the drop from High to Ultra is 23.2 FPS. This pattern indicates that at 4K, the GPU's pixel throughput is the dominant constraint, and settings changes have diminishing returns as resolution increases.

How This Combo Ranks

The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 4060 combination ranks 994th out of 1702 tested combos in Barony, placing it in the top 58.4% of all configurations. This mid-tier ranking is somewhat surprising given the high absolute frame rates, but it reflects that Barony is a lightweight game where many high-end combinations achieve even higher performance.

The ranking suggests that while this combo delivers excellent playable frame rates at all resolutions, it does not stand out among the more powerful configurations tested. The 5800X3D's 83rd percentile CPU ranking and the RTX 4060's 66th percentile GPU ranking combine to create a system that is capable but not elite. The data indicates that the RTX 4060's 8 GB memory capacity and 128-bit bus are the primary limiting factors preventing this combo from achieving a higher rank, particularly at 4K where the GPU's memory bandwidth of 272.0 GB/s becomes a bottleneck.

For a roguelike title like Barony, the ranking reflects that the game's visual complexity is modest, and even mid-range hardware can exceed 100 FPS at 4K with appropriate settings. The combo's rank of 994 out of 1702 underscores that users seeking maximum frame rates would need a more powerful GPU, but for standard 1080p and 1440p gaming, this pairing delivers well above the 60 FPS threshold across all settings.