Minimum

The AMD Ryzen 5 5500X3D and Intel Arc B570 combination delivers a mid-range experience in Minimum, a third-person shooter from 2014. The data shows this pairing is firmly positioned for 1080p and 1440p gaming, with 4K proving to be a significant challenge. The measured FPS figures reveal a system where the GPU is the primary bottleneck at higher resolutions, while the CPU’s strengths are more apparent at lower settings and resolutions.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor based on the Zen 3 architecture, specifically the Vermeer codename. It operates with a base clock of 3.00 GHz and a boost clock of 4.00 GHz, all within a 105 W TDP. This processor sits on the AMD Socket AM4 platform and supports DDR4 memory in a dual-channel configuration, providing 51.2 GB/s of memory bandwidth. The most notable feature is its substantial 96 MB of shared L3 cache, which is a key characteristic of the X3D series.

In the context of Minimum, the CPU’s role is most clearly defined when looking at the lower-resolution benchmarks. At 1080p with Low settings, the system achieves 145 FPS. This high frame rate, compared to the 4K Low result of 50 FPS, suggests that the CPU has ample headroom to feed frames when the graphical load is light. The 6-core and 12-thread configuration is more than sufficient for a game of this era, meaning the processor is unlikely to be the limiting factor in most scenarios. The data implies that the large L3 cache helps maintain consistent performance, though the game’s age means it likely does not heavily utilize the cache's full potential.

The CPU’s benchmark scores further contextualize its performance. In the Passmark suite, it scores 20,363 in multithreaded tests and 2,941 in single-threaded tests. Its average benchmark score is 37,018, placing it in the 85th percentile of all CPUs. This indicates a strong, capable processor for general and gaming tasks. The nearest rivals show a tight grouping: the AMD Ryzen 5 5600F scores 36,945 (0.2% higher), the AMD Ryzen AI 7 PRO 450 scores 37,093 (0.2% lower), and the Intel Core Ultra 5 225 scores 36,938 (0.2% higher). This suggests the 5500X3D is right at the expected performance level for its class, with no significant advantage or disadvantage compared to its direct competition. When the resolution increases and the frame rate drops, it is not due to CPU limitations but rather the GPU's inability to keep up.

Settings Recommendations — which preset gives the best experience per the measured rows

Analyzing the measured FPS data across different settings presets reveals a clear hierarchy. At 1080p, the Low preset yields an average of 145 FPS, which is the highest measured. The Medium preset drops to 111 FPS, High to 93 FPS, and Ultra to 71 FPS. For players with high refresh rate monitors, the Low preset is the only option that comes close to maximizing the display's potential. However, the jump from Low to Medium is a 34 FPS difference, which is substantial.

The data suggests that the Medium preset offers the best balance for a smooth experience at 1080p. It provides a 111 FPS average, well above the 60 FPS threshold, and the measured minimum of 95 FPS ensures that frame pacing remains consistent. This is a more stable experience than the Low preset, which has no measured minimum but is likely to have more variance. The High preset at 93 FPS is also playable, but the Ultra preset at 71 FPS, while still above 60, is where the system starts to feel less fluid. At 1440p, the pattern is similar. The Low preset achieves 94 FPS, while Medium drops to 72 FPS. The High preset hits exactly 60 FPS, and Ultra falls to 46 FPS, which is below the 60 FPS target. For a consistent 60+ FPS experience at 1440p, the Medium preset is the highest quality option that maintains this performance level. The data indicates that choosing Medium over High at 1440p is a worthwhile trade-off for a 12 FPS gain. At 4K, no preset achieves a playable 60 FPS, with the Low preset reaching only 50 FPS. Therefore, the recommendation is to use the Medium preset for 1080p and 1440p gaming, as it provides a superior balance of visual quality and frame rate stability compared to the other options.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The FPS scaling across resolutions paints a definitive picture of the system's bottleneck. At Low settings, the average FPS drops from 145 at 1080p to 94 at 1440p, a 35% reduction, and then to 50 at 4K, a 47% reduction from 1440p. This steep decline is characteristic of a GPU-bound scenario. As the resolution increases, the number of pixels the Intel Arc B570 must render grows exponentially, and its performance degrades accordingly.

The story is the same at Medium settings. The average FPS is 111 at 1080p, 72 at 1440p, and 39 at 4K. The High preset shows 93 FPS at 1080p, 60 FPS at 1440p, and 32 FPS at 4K. In each case, the frame rate drops by roughly 35-45% when moving from 1080p to 1440p, and then by a similar margin again when moving to 4K. This consistent, dramatic scaling with resolution is the classic signature of a GPU-limited system. If the CPU were the bottleneck, the frame rates would remain relatively flat across resolutions, as the CPU's workload would not change significantly.

The data strongly indicates that the Intel Arc B570 is the definitive limiting component in this configuration. Its 10 GB of GDDR6 memory and 160-bit bus, providing 380.0 GB/s of bandwidth, are simply insufficient to maintain high frame rates at 4K. The GPU's 11.52 TFLOPS of FP32 compute power is also a limiting factor. The CPU, with its high single-thread score and large cache, is not being fully utilized at higher resolutions because the GPU cannot deliver frames fast enough. This is a clear case where the CPU has more than enough power for the game, but the GPU's performance ceiling is reached relatively quickly as resolution increases.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 5500X3D and Intel Arc B570 ranks 2,336 out of 2,939 tested combos in Minimum. This places it in the 21st percentile of all tested systems, meaning that roughly 79% of the tested combinations perform better. This ranking is a direct consequence of the GPU's limitations at higher resolutions, which significantly drags down the overall average performance.

This ranking is somewhat surprising given the CPU's strong 85th percentile standing. The data implies that the GPU is holding the combo back. The CPU is a high-performing part, but the Arc B570 is a mid-range GPU, and its performance in this title is not sufficient to boost the combo's ranking. The fact that the CPU's nearest rivals all score within 0.3% of each other suggests that swapping the 5500X3D for a similar processor would not change this combo's rank. The performance is dictated by the GPU. To improve this combo's rank, a more powerful GPU would be necessary. The data shows that the CPU is not the issue; it is the GPU that is failing to deliver the frame rates needed to compete with higher-ranked systems. The 2,336 rank is a clear indicator that this is a mid-range setup, best suited for 1080p and 1440p gaming, with significant compromises required at 4K.

GPU Role — VRAM, clocks, and how they relate to this game's results

The Intel Arc B570 is built on the Xe2-HPG architecture and is part of the Battlemage generation. It features a base and boost clock of 2500 MHz and has 2,304 shading units. The GPU is equipped with 10 GB of GDDR6 memory on a 160-bit bus, which provides a bandwidth of 380.0 GB/s. Its 150 W TDP and dual-slot design place it as a mainstream desktop component. The GPU's compute capabilities are rated at 11.52 TFLOPS for FP32 operations.

In Minimum, the GPU's role is the dominant factor in determining overall performance. Its 10 GB VRAM is not a constraint at any of the tested settings, as the game is from 2014 and likely uses less than 6 GB even at 4K. The bottleneck is the raw processing power and memory bandwidth. The 380.0 GB/s bandwidth is insufficient for 4K, which requires moving a massive amount of pixel data. The GPU's Passmark G3D score is 14,195, and its average benchmark score is 20,556, placing it in the 65th percentile of all GPUs. This is a mid-pack score, and the measured FPS reflects this.

The GPU's nearest rivals in benchmark scores are the NVIDIA GeForce RTX 3070 Mobile (20,534, 0.1% higher), Intel Arc A750 (20,582, 0.1% lower), and AMD Radeon R9 M390X (20,662, 0.5% lower). These are all comparable in raw compute, but the Arc B570's performance in Minimum is what matters. The data shows that at 1080p, it can deliver high frame rates, but it struggles to maintain 60 FPS at 4K. The GPU is the sole reason the combo rank is so low, as it simply cannot process the game at higher resolutions fast enough to keep up with the CPU.

FAQ

Q: What is the highest average FPS achievable with this CPU and GPU combo at 1080p?

A: The highest measured average FPS is 145, which is achieved at 1080p with the Low settings preset.

Q: Can this system maintain a 60 FPS average at 1440p?

A: Yes, the data shows that at 1440p, the High preset achieves an average of 60 FPS, and the Medium preset reaches 72 FPS.

Q: Is the CPU or GPU the primary bottleneck at 4K resolution?

A: The GPU is the primary bottleneck. The frame rate drops dramatically at 4K (e.g., 32 FPS on High), while the CPU has sufficient power, as evidenced by its high 1080p frame rates.

Q: How does the AMD Ryzen 5 5500X3D's benchmark score compare to its nearest rival, the AMD Ryzen 5 5600F?

A: The Ryzen 5 5500X3D has an average benchmark score of 37,018, which is 0.2% lower than the Ryzen 5 5600F's score of 36,945.

*Q: What is the combo's rank among all tested systems in Minimum?*

A: The combo ranks 2,336 out of 2,939 tested combos, placing it in the lower 21st percentile of performance.

Q: What is the average FPS at 4K with the Medium settings preset?

A: The average FPS at 4K with the Medium preset is 39, with a measured minimum of 33 FPS and a maximum of 44 FPS.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The following data represents the measured average FPS, along with minimum and maximum values where available, for the AMD Ryzen 5 5500X3D and Intel Arc B570 combination in Minimum.

3840x2160 (4K)

• Ultra: Average 25 FPS.
• High: Average 32 FPS.
• Medium: Average 39 FPS, with a minimum of 33 FPS and a maximum of 44 FPS.
• Low: Average 50 FPS.

2560x1440 (1440p)

• Ultra: Average 46 FPS.
• High: Average 60 FPS.
• Medium: Average 72 FPS, with a minimum of 61 FPS and a maximum of 82 FPS.
• Low: Average 94 FPS.

1920x1080 (1080p)

• Ultra: Average 71 FPS.
• High: Average 93 FPS.
• Medium: Average 111 FPS, with a minimum of 95 FPS and a maximum of 128 FPS.
• Low: Average 145 FPS.