Minecraft

This analysis examines the measured performance of the Intel Core i5-11400F paired with the NVIDIA GeForce RTX 5070 Ti in Minecraft. The data reveals a configuration capable of extreme frame rates, even at high resolutions, with the CPU acting as the primary bottleneck only at the lowest settings. This report breaks down the scaling, ranking, and specific results to provide a clear picture of what this combo delivers.

Resolution Scaling

The performance landscape for this configuration in Minecraft is defined by how the frame rate responds to resolution changes across different quality presets. The most telling data point is the drop from 1080p to 4K at the Low preset. At 1920x1080 Low, the combo produces an average of 560 FPS. Moving to 3840x2160 Low, the average falls to 253 FPS. This represents a significant drop of approximately 55%, indicating that the GPU is being tasked more heavily at 4K, though the absolute numbers remain exceptionally high.

However, the scaling pattern shifts dramatically when the settings are increased. At the High preset, the frame rate goes from 474 FPS at 1080p down to 304 FPS at 1440p, and finally to 159 FPS at 4K. The percentage drop from 1080p to 4K here is about 66%, which is a steeper decline than what is seen at Low settings. This suggests that as visual fidelity increases, the workload shifts more decisively onto the GPU, making it the limiting factor for achieving the highest frame rates.

The Medium preset shows a similar trend, with an average of 515 FPS at 1080p, 383 FPS at 1440p, and 200 FPS at 4K. The drop from 1080p to 4K is approximately 61%. The Ultra preset tells a different story entirely. At 1080p, the average is 301 FPS. This drops to 190 FPS at 1440p and plummets to 99 FPS at 4K. The 4K Ultra result is the only configuration measured that dips below the 100 FPS mark, showing that the RTX 5070 Ti’s rendering load at this extreme setting is substantial.

The pattern across the presets indicates that the Intel Core i5-11400F is capable of feeding the GPU at 1080p, even on the Low preset where the frame rate peaks at 560 FPS. The fact that the Low preset at 1080p yields much higher frame rates than the High preset at the same resolution points to the GPU becoming a larger factor as the game’s shading and fill-rate requirements increase. The 4K results, especially at Medium and Ultra, show the GPU is the dominant constraint, with the CPU keeping pace enough to allow the GPU to work to its potential. The data suggests that at 1080p, this is a balanced combo, but at 4K with higher settings, the RTX 5070 Ti is the clear limiting component.

How This Combo Ranks

Within the context of all tested combinations, this specific pairing holds a notable position. The data shows a combo rank of 551 out of 3710 tested configurations. This places it within the top 15% of all tested combos for this game, indicating a strong overall performance tier.

This ranking is consistent with the high absolute frame rates observed. For example, achieving 304 FPS at 1440p High or 253 FPS at 4K Low are results that would place this combo ahead of many others. The rank of 551 reflects that while the CPU and GPU are both capable, they are not at the absolute top of the performance hierarchy when paired together in this specific title. The CPU itself sits at the 71st percentile against all CPUs, and the GPU is at the 86th percentile against all GPUs. The combo rank of 551 suggests that the pairing is efficient and that neither component is severely holding back the other in a way that would push the combination much lower in the standings.

The CPU’s nearest rivals in synthetic benchmarks, such as the AMD EPYC 7H12 with a delta of 0.3% and the Intel Core Ultra 7 164U with a delta of 0.6%, show that the i5-11400F’s processing power is competitive with a wide range of processors. While these are synthetic scores, they provide context for the CPU’s ability to handle the game’s physics and logic. The GPU’s nearest rivals, like the AMD Radeon RX 6900 XT with a delta of -2% and the AMD Radeon RX 6800 XT with a delta of 3.1%, underscore that the RTX 5070 Ti is in the high-end tier of graphics cards. The combination of a mid-to-high-tier CPU from a synthetic standpoint with a high-tier GPU results in a combo that performs admirably in Minecraft, justifying its strong ranking.

FAQ

Q: What is the highest average frame rate recorded for this combo?

A: The highest recorded average frame rate is 560 FPS, achieved at 1920x1080 resolution with the Low settings preset.

Q: Can this configuration handle 4K gaming in Minecraft?

A: Yes, it can handle 4K. The data shows an average of 159 FPS at 4K High and 253 FPS at 4K Low, both of which are very playable. Even at 4K Ultra, it maintains an average of 99 FPS.

Q: Is the CPU or GPU the main bottleneck at 1080p Low?

A: The data does not explicitly identify a bottleneck, but the 560 FPS result at 1080p Low is the maximum frame rate recorded. Since increasing the resolution to 1440p Low only decreases the frame rate to 480 FPS, the GPU is still capable of rendering frames very quickly. The CPU is likely the primary limiter at this low-setting, low-resolution scenario.

Q: How does the frame rate change from Medium to Ultra at 1440p?

A: At 2560x1440, the Medium preset provides an average of 383 FPS, while the Ultra preset provides an average of 190 FPS. This is a difference of 193 FPS, showing a significant performance cost for the highest visual quality settings.

Q: What is the minimum frame rate recorded for the 4K Medium preset?

A: The 4K Medium preset is the only 4K row with min/max data. It records a minimum FPS of 170 and a maximum of 230, with an average of 200 FPS.

Q: How does this combo rank against all other tested combos?

A: This combo ranks 551st out of 3710 total tested combos, placing it in a strong position within the top 15% of all configurations tested for this game.

Measured FPS Breakdown

This section provides the exact measured average frame rates for every tested configuration.

1920x1080

• Low: 560 FPS average
• Medium: 515 FPS average (min 438, max 592)
• High: 474 FPS average
• Ultra: 301 FPS average

At 1080p, the frame rates are exceptionally high across all presets. The jump from Low to Medium results in a 45 FPS drop, and from Medium to High a further 41 FPS drop. The most substantial decline is from High to Ultra, which costs 173 FPS, indicating that the Ultra preset introduces a significant rendering load even at this resolution.

2560x1440

• Low: 480 FPS average
• Medium: 383 FPS average (min 326, max 441)
• High: 304 FPS average
• Ultra: 190 FPS average

The 1440p results show a consistent scaling pattern. Each step up in settings from Low to High costs roughly 90-100 FPS. The Ultra preset is the most demanding, nearly halving the frame rate from the High preset.

3840x2160

• Low: 253 FPS average
• Medium: 200 FPS average (min 170, max 230)
• High: 159 FPS average
• Ultra: 99 FPS average

At 4K, the performance is still very strong for most presets. The Low preset maintains over 250 FPS, and even High stays above 150 FPS. The Ultra preset is the only one to fall below 100 FPS, producing an average of 99 FPS. The scaling from Low to Ultra at this resolution shows a total drop of 154 FPS, highlighting the GPU’s workload at 4K.

GPU Role

The NVIDIA GeForce RTX 5070 Ti plays a central role in determining the high frame rates seen in this data. Its memory configuration includes 16 GB of GDDR7 type memory on a 256-bit bus, providing a bandwidth of 896.0 GB/s. This large memory pool and high bandwidth are more than sufficient for Minecraft, even at 4K resolution with high-resolution textures, ensuring that texture streaming and data transfer are not bottlenecks.

The GPU’s clock speeds are listed as a base of 2295 MHz and a boost of 2452 MHz. These high clocks contribute directly to the impressive raw performance. The data shows that at 4K High, the combo achieves 159 FPS, a result that is heavily dependent on the GPU’s ability to process pixels and shading operations quickly. The GPU’s architecture, Blackwell 2.0, and its 8960 shading units provide the computational power needed to handle the game’s rendering pipeline.

The GPU’s impact is most evident when looking at the scaling from 1080p to 4K within the same settings. For instance, at the High preset, the frame rate drops from 474 FPS at 1080p to 159 FPS at 4K. This 66% reduction in performance is a direct consequence of the GPU having to render four times as many pixels. The fact that the card still manages to produce over 150 FPS at 4K High shows that it is a high-end part, but the data also shows that the Ultra preset at 4K brings it down to just under 100 FPS. This indicates that while the RTX 5070 Ti is powerful, the most extreme settings at maximum resolution will test its limits. The GPU’s benchmark scores, such as a Passmark G3D score of 32974 and a 3DMark Steel Nomad score of 6604, further corroborate its position as a high-performance part capable of delivering the frame rates observed.

Settings Recommendations

The measured data provides clear guidance on the optimal settings for different priorities. For players with a 1080p monitor seeking the absolute highest frame rates, the Low preset delivers an average of 560 FPS. However, the Medium preset at 515 FPS is a strong recommendation, as it likely provides a better visual experience while still maintaining an incredibly high frame rate that far exceeds the refresh rate of most displays.

At 1440p, the Medium preset is the best balance of visual quality and performance, offering an average of 383 FPS. The High preset is also an excellent choice at 304 FPS, providing a significant visual upgrade over Medium for a still very high frame rate. The Ultra preset, at 190 FPS, is for those who prioritize visual fidelity above all else and still offers a frame rate well above 144Hz.

For 4K gaming, the recommendations shift. The Low preset yields 253 FPS, which is excellent, but the Medium preset at 200 FPS is a better visual option. The High preset remains very playable at 159 FPS and is arguably the sweet spot for 4K, offering a substantial improvement in graphical detail over Medium while staying above the 144 FPS threshold. The Ultra preset, with an average of 99 FPS, is the only setting that dips below 100 FPS. This is still a playable frame rate for many, but for competitive or high-refresh-rate gaming, the High preset at 4K provides a better experience. The data suggests that the High preset is the best overall recommendation for this combo when gaming at 4K, as it balances the GPU’s capabilities with a high quality image.