Minecraft

# Minecraft with AMD Ryzen 5 5600GT + NVIDIA GeForce RTX 2060 SUPER

This combination of AMD's 6-core Ryzen 5 5600GT and NVIDIA's RTX 2060 SUPER produces a remarkably fluid Minecraft experience across all tested resolutions, with the data showing triple-digit frame rates at 1080p and 1440p in most settings, while 4K remains playable at High settings. The benchmark results place this combo at rank 2556 out of 3710 tested combinations, which puts it in the upper third of all systems tested for this title. The pairing demonstrates a well-balanced profile where the CPU's strong single-thread performance complements the GPU's capable Turing-based architecture, though the scaling patterns reveal that different settings presets shift the bottleneck between the two components.

Resolution Scaling

The measured FPS data reveals a clear and predictable scaling pattern as resolution increases, though the magnitude of the drop varies substantially by settings preset. At Low settings, the average frame rate falls from 389 FPS at 1920x1080 to 246 FPS at 2560x1440, a reduction of 143 FPS, and then to 128 FPS at 3840x2160, representing a total drop of 261 FPS from 1080p to 4K. This steep decline indicates that at Low settings, the GPU becomes the limiting factor as resolution increases, since the CPU has ample headroom with such light rendering demands.

The Medium preset shows a similar but slightly less dramatic scaling pattern, with average FPS moving from 308 at 1080p to 195 at 1440p and then to 102 at 4K. The High preset follows with 245 FPS at 1080p, 154 at 1440p, and 81 at 4K. Ultra settings exhibit the most constrained scaling, starting at 153 FPS at 1080p, dropping to 97 at 1440p, and reaching only 50 FPS at 4K—a 103 FPS reduction from the lowest to highest resolution.

The percentage drops between resolutions are telling. From 1080p to 1440p, the decline ranges from 36.6% at Low settings to 36.6% at Medium, 37.1% at High, and 36.6% at Ultra. The 1440p to 4K transition is steeper across the board: 47.9% for Low, 47.7% for Medium, 47.4% for High, and 48.5% for Ultra. This near-uniform scaling percentage across all presets suggests that the RTX 2060 SUPER's 8 GB GDDR6 memory and 256-bit bus are handling the increased pixel count consistently, with the 448.0 GB/s bandwidth proving sufficient at every step.

At 4K Ultra, the 50 FPS average indicates the GPU is heavily loaded, while at 1080p Low, the 389 FPS result suggests the CPU's ceiling is being approached. The data shows that Minecraft at this combination behaves as a GPU-bound title at higher resolutions and settings, but at 1080p Low, the Ryzen 5 5600GT's capabilities become more relevant. The 154 FPS at 1440p High versus 245 FPS at 1080p High demonstrates that even moderately demanding settings keep the GPU as the primary constraint.

CPU Role

The AMD Ryzen 5 5600GT brings six cores and twelve threads based on the Zen 3 architecture, with a base clock of 3.60 GHz and a boost clock of 4.60 GHz. This 5000-series processor, built on TSMC's 7 nm process, delivers strong single-thread performance that matters significantly for Minecraft. The Cinebench R23 single-core score of 2438 and multi-core score of 17272 indicate a processor that excels at both lightly-threaded and moderately-parallel workloads, which suits Minecraft's typical usage patterns.

The 16 MB of L3 cache and 64 KB L1 cache per core provide the low-latency memory access that benefits game logic and world generation tasks. The processor's 51.2 GB/s memory bandwidth over dual-channel DDR4 is adequate for feeding the GPU, and the PCIe Gen 3 x16 interface provides sufficient bandwidth for the RTX 2060 SUPER. The PassMark single-thread score of 3348 and multithread score of 20325 place this CPU in the 74th percentile of all processors, with benchmark results showing it within 0.5% of rivals like the Intel Core i5-12490F and Intel Xeon 6325P.

In Minecraft specifically, the CPU role becomes evident when examining the difference between Low and Ultra settings at the same resolution. At 1080p, Low yields 389 FPS while Ultra yields 153 FPS—a 236 FPS gap that cannot be attributed to CPU performance alone, since both settings run on the same processor. The CPU's contribution is more visible in the fact that 1080p Low produces nearly three times the frame rate of 4K Ultra, indicating that when the GPU is less burdened, the processor can push frame rates far beyond what most displays can show.

The 3DMark scores further characterize this CPU: 913 in single-thread, 5523 in 16-thread, and 5554 in max-thread tests. These results suggest that while the processor has solid multi-threading capability, its single-thread performance is what makes it particularly suitable for a game like Minecraft, where the main game loop and physics calculations frequently depend on single-core speed. The Geekbench single-core score of 1843 and multi-core score of 7986 corroborate this profile.

FAQ

Q: What is the best resolution to use with this combo for competitive play?

A: At 1920x1080 with Low settings, the system delivers 389 FPS average, which is the highest measured frame rate in the dataset. For maximum responsiveness in competitive scenarios, this combination of resolution and settings provides the most headroom above typical high-refresh-rate display capabilities.

Q: Can this system handle 4K gaming in Minecraft?

A: Yes, at 3840x2160 with High settings, the average FPS is 81, and at Medium settings it reaches 102 FPS with a minimum of 86 FPS. However, at Ultra settings, the average drops to 50 FPS, which may be below the threshold for smooth gameplay on high-refresh-rate 4K displays.

Q: How does the RTX 2060 SUPER compare to its closest rivals in overall GPU benchmarks?

A: The RTX 2060 SUPER has an average benchmark score of 18093, placing it in the 62nd percentile of all GPUs. It sits within 1.6% of the NVIDIA GeForce RTX 3060 Mobile, AMD Radeon Pro 5700, AMD Radeon RX 460, and Intel Arc A770M, with delta percentages ranging from -0.4% to -1.6%.

Q: Is the Ryzen 5 5600GT a strong processor for gaming workloads?

A: The processor ranks in the 74th percentile of all CPUs with an average benchmark score of 20733. It trails the Intel Core i5-12490F by only 0.3%, and its single-thread performance, measured at 2438 in Cinebench R23 single-core, is well-suited for games that rely on per-core performance.

Q: What frame rates can I expect at 1440p with medium settings?

A: At 2560x1440 with Medium settings, the system averages 195 FPS with a minimum of 165 FPS and maximum of 224 FPS. This provides a comfortable experience for 144 Hz monitors, with the minimum FPS still above the refresh rate threshold.

Q: How significant is the FPS difference between Low and Ultra settings?

A: The gap is substantial. At 1080p, Low settings produce 389 FPS while Ultra produces 153 FPS, a difference of 236 FPS. At 1440p, the difference is 149 FPS (246 vs 97), and at 4K it is 78 FPS (128 vs 50). The scaling suggests that Ultra settings impose roughly 60-61% performance penalty compared to Low across all resolutions.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings produce an average of 389 FPS, Medium settings reach 308 FPS with a minimum of 262 FPS and maximum of 355 FPS, High settings achieve 245 FPS, and Ultra settings drop to 153 FPS. The 1080p results span a wide range from 153 to 389 FPS, giving users significant flexibility depending on whether they prioritize visual fidelity or raw frame rate.

Moving to 2560x1440, the average FPS values step down predictably. Low settings yield 246 FPS, Medium settings deliver 195 FPS with a minimum of 165 and maximum of 224, High settings produce 154 FPS, and Ultra settings fall to 97 FPS. The 1440p Medium result is particularly noteworthy because the minimum FPS of 165 remains above the 144 Hz refresh rate common on many gaming monitors, ensuring consistent smoothness.

At 3840x2160, the RTX 2060 SUPER begins to show its limits under heavy load. Low settings still manage a strong 128 FPS average, Medium settings reach 102 FPS with a minimum of 86 and maximum of 117, High settings maintain 81 FPS, and Ultra settings drop to 50 FPS. The 4K Ultra result represents the only setting in the entire dataset where the average FPS falls below 60, indicating that this preset pushes the GPU beyond its comfortable operating range.

The Medium preset at each resolution provides the only complete min/max data in the dataset. At 1080p, the 262-355 FPS range shows tight frame pacing; at 1440p, the 165-224 FPS range maintains consistency; and at 4K, the 86-117 FPS range demonstrates that even at higher resolutions, the system avoids severe frame time spikes. This consistency across resolutions suggests that the combination handles varying loads without significant stuttering.

How This Combo Ranks

The combination of AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 2060 SUPER achieves rank 2556 out of 3710 tested combos in Minecraft, placing it in the 31st percentile of all tested systems. This ranking reflects the overall capability of the pairing relative to other CPU-GPU combinations tested in this game, and it indicates that while this system is not at the top tier, it outperforms a substantial majority of alternatives.

The ranking is influenced by both components' individual standings. The CPU sits in the 74th percentile of all processors, while the GPU ranks in the 62nd percentile of all GPUs. The combo rank being lower than either individual component percentile suggests that Minecraft's specific performance characteristics—likely its dependency on single-thread CPU performance combined with GPU fill rate—create a scenario where the pairing's combined strengths do not fully translate to a top-tier ranking.

When contextualizing this rank, it is important to note that Minecraft is a game where the difference between rank 2556 and higher ranks may be driven by systems with significantly more powerful GPUs or CPUs. The measured FPS data shows that at 1080p, even Ultra settings maintain 153 FPS, which is already a very playable experience. The ranking thus reflects headroom for higher refresh rates or higher resolutions rather than a fundamental inadequacy.

The delta percentages for the CPU's nearest rivals show that the Ryzen 5 5600GT is essentially tied with the Intel Core i5-12490F (-0.3%), Intel Xeon 6325P (-0.4%), Intel Core Ultra 5 125U (-0.4%), and AMD EPYC 7J13 (-0.5%) in average benchmark scores. This tight grouping means that swapping to any of these alternatives would likely produce nearly identical Minecraft performance, making the combo's rank more dependent on GPU choice than CPU selection within this performance tier.

Settings Recommendations

For users with 1080p displays, the High preset at 245 FPS provides an excellent balance between visual quality and performance, offering nearly 2.5 times the refresh rate of a standard 60 Hz monitor and well above 144 Hz displays. Users with 240 Hz monitors may prefer Medium settings, which deliver 308 FPS, ensuring that even the minimum frame rate of 262 FPS stays above the display's refresh rate.

At 1440p resolution, Medium settings at 195 FPS with a 165 FPS minimum are the recommended choice for 144 Hz monitors, as the worst-case frame rate still exceeds the refresh threshold. High settings at 154 FPS also work well for 144 Hz displays, though the margin above 144 FPS is narrower. Users with 60 Hz displays can comfortably select Ultra settings at 97 FPS, which provides substantial headroom for smooth gameplay.

For 4K displays, High settings at 81 FPS deliver a smooth experience on 60 Hz monitors, and Medium settings at 102 FPS offer additional headroom. The Ultra preset at 50 FPS falls below the 60 FPS threshold and may result in perceptible judder on standard refresh rate displays, making it the least recommended option unless visual fidelity takes absolute priority over smoothness.

Across all resolutions, the Medium preset demonstrates the most consistent frame pacing with complete min/max data available, showing tight ranges that indicate stable performance. The data suggests that Medium settings provide the best overall experience for users who want a blend of visual quality and performance headroom, while High settings offer the best compromise for those prioritizing visual fidelity without sacrificing playability. Low settings should be reserved for competitive scenarios where maximum frame rate is the primary objective, as the visual degradation is significant but the performance gain is substantial.