Lockdown Protocol

# Lockdown Protocol with Intel Core Ultra 7 270K Plus + NVIDIA GeForce RTX 5070 Ti

The measured frame rates for this combination place it at rank 232 out of 2828 tested configurations in Lockdown Protocol, putting it in the top 8% of all setups. The GPU sits at the 86th percentile among all graphics cards, while the CPU ranks in the 96th percentile among all processors, and the data shows a system that scales predictably across resolutions with the RTX 5070 Ti as the primary performance arbiter. The Intel Core Ultra 7 270K Plus, with its 24 cores and 24 threads, never appears to bottleneck the NVIDIA GeForce RTX 5070 Ti in this title, as evidenced by the smooth progression of frame rates from 1080p through 4K.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep but consistent with a GPU-bound scenario. At High settings, the average FPS falls from 194 at 1920x1080 to 142 at 2560x1440, then further to 92 at 3840x2160. This represents a 27% reduction from 1080p to 1440p, followed by a 35% reduction from 1440p to 4K. The total drop from 1080p to 4K at High settings is 53%, which is a substantial but expected decline for a modern FPS title at these resolutions.

The Low settings preset tells a similar story with even higher absolute numbers. At 1920x1080 Low, the system achieves 313 FPS on average, dropping to 230 at 2560x1440 (a 27% decline) and then to 148 at 3840x2160 (a 36% decline from 1440p). The pattern across all settings presets is remarkably consistent: roughly a quarter to a third of performance is lost at each resolution step upward, which indicates that the RTX 5070 Ti's rendering pipeline is the limiting factor rather than any CPU constraint.

At Medium settings, the measured data includes minimum and maximum frame rates, providing additional insight into scaling behavior. At 1920x1080 Medium, the average is 223 FPS with a minimum of 189 and maximum of 256. At 2560x1440 Medium, the average drops to 163 FPS with a minimum of 139 and maximum of 188. At 3840x2160 Medium, the average falls to 105 FPS with a minimum of 90 and maximum of 121. The spread between minimum and maximum frames remains proportionally similar across resolutions, suggesting stable frame pacing rather than erratic spikes.

Ultra settings at 4K produce an average of 69 FPS, which is the only measured configuration that dips below the 70 FPS threshold. The scaling from 1080p Ultra at 146 FPS to 1440p Ultra at 107 FPS represents a 27% drop, and the further decline to 69 FPS at 4K is a 36% reduction. This consistent scaling pattern across all four settings presets confirms that Lockdown Protocol's performance is dominated by pixel throughput and GPU shading workload, with the RTX 5070 Ti's 16 GB of GDDR7 memory proving sufficient even at the highest resolution.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the clear performance driver in this configuration. Its 16 GB of GDDR7 memory on a 256-bit bus provides 896.0 GB/s of bandwidth, which is ample for Lockdown Protocol's texture and geometry demands at all tested resolutions. The GPU's 8960 shading units, 280 texture mapping units, and 96 ROPs deliver the raw throughput that the measured frame rates reflect, with the boost clock of 2452 MHz and base clock of 2295 MHz providing the frequency headroom needed for sustained gaming loads.

The GPU's benchmark results place it at the 86th percentile among all graphics cards, with an average benchmark score of 49957. Its nearest rival, the AMD Radeon RX Vega 64, scores 50001, which is a 0.1% difference in favor of the AMD card. The Intel Arc A550M trails by 0.4% with a score of 49737, while the AMD Radeon RX 6900 XT leads by 2% and the AMD Radeon RX 6800 XT trails by 3.1%. These narrow margins in synthetic benchmarks contrast with the strong real-world gaming performance measured here, indicating that Lockdown Protocol favors the Blackwell 2.0 architecture's specific strengths.

The 70 ray tracing cores and 280 tensor cores suggest that the GPU has substantial headroom for future titles or games that leverage these features more aggressively. In Lockdown Protocol, the data shows that at 4K Ultra, the average FPS of 69 is the only sub-60 result, which means the GPU can handle even the most demanding preset at the highest resolution, albeit with some margin for improvement. The GPU's 43.94 TFLOPS of FP32 performance and 686.6 GTexel/s texture rate are the specifications that translate into the measured frame rates, and the 235.4 GPixel/s pixel rate directly ties to resolution scaling behavior.

At 1080p Low, the system reaches 313 FPS, which is well beyond what most displays can show, and even at 4K Low the 148 FPS average provides a smooth experience for competitive play. The GPU's 300 W TDP and PCIe 5.0 x16 interface ensure that data transfer and power delivery are not bottlenecks, and the dual-slot design with a 1x 16-pin power connector fits standard gaming builds. The RTX 5070 Ti's release date of February 2025 makes it a current-generation part, and its 5 nm process node from TSMC with 45,600 million transistors on a 378 mm² die represents a dense, efficient design.

Settings Recommendations

The measured data provides clear guidance for optimal settings at each resolution. At 1920x1080, all settings presets deliver comfortably playable frame rates, with even Ultra averaging 146 FPS. The jump from Ultra to High at 1080p is 48 FPS (from 146 to 194), while High to Medium costs 29 FPS (from 194 to 223), and Medium to Low costs 90 FPS (from 223 to 313). For competitive play at 1080p, Low settings at 313 FPS will maximize refresh rate potential, but for visual quality with minimal compromise, High at 194 FPS offers an excellent balance.

At 2560x1440, the recommendation shifts. Ultra averages 107 FPS, which is playable but leaves little headroom for demanding scenes. High at 142 FPS provides a substantial 35 FPS improvement over Ultra, and Medium at 163 FPS adds another 21 FPS on top of that. The data suggests that High is the sweet spot at 1440p, offering a 33% improvement over Ultra while maintaining visual fidelity. Low at 230 FPS is available for players prioritizing maximum frame rates, but the visual degradation may not be worth the 88 FPS gain over High.

At 3840x2160, settings choices become more consequential. Ultra averages 69 FPS, which is above the 60 FPS threshold but may struggle in intense combat sequences. High at 92 FPS provides a 33% improvement over Ultra and is the recommended baseline for 4K gaming. Medium at 105 FPS offers an additional 13 FPS over High, and Low at 148 FPS provides the only 4K configuration that exceeds 144 FPS. For players with high-refresh-rate 4K displays, Low settings at 148 FPS will be the smoothest experience, but for those prioritizing visual quality, High at 92 FPS is the optimal compromise between fidelity and performance.

The Medium settings row includes minimum FPS data at all three resolutions: 189 at 1080p, 139 at 1440p, and 90 at 4K. These minimums suggest that Medium provides the most consistent frame delivery, with the gap between average and minimum remaining tight across resolutions. This consistency makes Medium an attractive option for players who value stable frame times over peak averages.

FAQ

Q: Can this system run Lockdown Protocol at 4K Ultra settings?

A: Yes, but with a caveat. The measured average FPS at 3840x2160 Ultra is 69, which clears the 60 FPS threshold for smooth gameplay. However, this is the only configuration tested that falls below 90 FPS, so players seeking more headroom should consider High settings at 92 FPS or Medium at 105 FPS.

Q: What is the best settings preset for competitive play at 1080p?

A: Low settings at 1920x1080 deliver 313 FPS on average, which is the highest measured frame rate in the entire dataset. This provides maximum refresh rate headroom for competitive play. Medium at 223 FPS and High at 194 FPS are also viable, but Low offers the largest performance margin.

Q: How does the RTX 5070 Ti compare to its nearest rivals in synthetic benchmarks?

A: The GPU scores 49957 on average, placing it at the 86th percentile. Its closest competitor, the AMD Radeon RX Vega 64, scores 50001 (0.1% higher), while the Intel Arc A550M scores 49737 (0.4% lower), the AMD Radeon RX 6900 XT scores 50951 (2% higher), and the AMD Radeon RX 6800 XT scores 48477 (3.1% lower).

Q: Is the Intel Core Ultra 7 270K Plus a bottleneck for the RTX 5070 Ti in this game?

A: The data suggests no. The frame rate scaling from 1080p to 4K follows a consistent pattern of 27-36% drops per resolution step, which is characteristic of GPU-bound performance. The CPU's 96th percentile ranking among all processors also indicates it has ample headroom for this workload.

Q: What frame rates can I expect at 1440p with Medium settings?

A: The measured average FPS at 2560x1440 Medium is 163, with a minimum of 139 and maximum of 188. This provides a smooth experience with good visual quality, and the minimum frame rate ensures consistent performance during demanding scenes.

Q: How does this system rank among all tested configurations for Lockdown Protocol?

A: This combination ranks 232 out of 2828 tested combos, placing it in the top 8.2% of all systems tested for this game. This ranking reflects the strong performance of both the CPU and GPU components.

CPU Role

The Intel Core Ultra 7 270K Plus provides the computational foundation for this gaming configuration, and its specifications suggest it is more than adequate for Lockdown Protocol's demands. With 24 cores and 24 threads, this Arrow Lake Refresh processor offers substantial parallel processing capability, though the game's frame rate data indicates that the GPU is the limiting factor at all tested resolutions and settings. The CPU's 3.70 GHz base clock and 5.50 GHz boost clock provide strong single-thread performance, which is critical for FPS titles that often have a primary simulation or game logic thread.

The processor's benchmark results confirm its capability. In Cinebench R23, it scores 44253 in multicore and 2439 in single-core tests. The Passmark multithread score of 68574 and single-thread score of 5068 further validate its performance profile. The CPU's average benchmark score of 93785 places it at the 96th percentile among all CPUs, with its nearest rival being the Intel Xeon 6520P at 93786 (a 0% difference). The AMD EPYC 4564P scores 95183 (1.5% higher), the AMD EPYC 9175F scores 95615 (1.9% higher), and the AMD EPYC 4565P scores 95764 (2.1% higher). These rival comparisons show that the Ultra 7 270K Plus is competitive with enterprise-class server processors, which is remarkable for a desktop gaming CPU.

The CPU's memory support for DDR5 with dual-channel configuration and 115.2 GB/s bandwidth ensures that the system's memory subsystem is not a bottleneck. The 36 MB of shared L3 cache, along with 3 MB of L2 cache per core and 192 KB of L1 cache per core, provides ample caching for game data. The 3 nm process node from TSMC with 17,800 million transistors on a 243 mm² die represents a modern, efficient design that runs within its 125 W TDP. The integrated Arc Xe-LPG Graphics 64EU is present but irrelevant for gaming when the RTX 5070 Ti is installed.

The CPU's release date of March 2026 and launch MSRP of $299 position it as a mainstream high-end desktop processor, and its Socket 1851 compatibility with PCIe Gen 5 (20 lanes from CPU) ensures it can fully utilize the RTX 5070 Ti's PCIe 5.0 x16 interface. The unlocked multiplier allows for overclocking, though the measured frame rates suggest no additional CPU performance is needed for Lockdown Protocol.

Measured FPS Breakdown

The complete measured frame rate data for Lockdown Protocol with this configuration is as follows. At 3840x2160, the system achieves 148 FPS on Low settings, 105 FPS on Medium settings (with a minimum of 90 and maximum of 121), 92 FPS on High settings, and 69 FPS on Ultra settings. The 4K Medium configuration is the only one in the entire dataset that includes both minimum and maximum frame rate measurements, providing a 31 FPS range between the 90 FPS minimum and 121 FPS maximum.

At 2560x1440, the measured results show 230 FPS on Low, 163 FPS on Medium (with a minimum of 139 and maximum of 188), 142 FPS on High, and 107 FPS on Ultra. The 1440p Medium configuration has a 49 FPS range between minimum and maximum, which is wider than the 4K Medium range but still indicates consistent performance. The progression from Low to Ultra at 1440p shows a 54% reduction in average FPS, from 230 to 107.

At 1920x1080, the system delivers 313 FPS on Low, 223 FPS on Medium (with a minimum of 189 and maximum of 256), 194 FPS on High, and 146 FPS on Ultra. The 1080p Medium configuration has a 67 FPS range, which is the widest spread of any measured settings preset. The total performance envelope spans from 69 FPS at 4K Ultra to 313 FPS at 1080p Low, representing a 4.5x difference between the most and least demanding configurations.

Across all resolutions, the Low settings preset consistently delivers the highest frame rates, with 4K Low (148 FPS) outperforming 1440p Ultra (107 FPS) by 38%. Similarly, 1440p Low (230 FPS) outperforms 1080p Ultra (146 FPS) by 58%. This cross-resolution comparison demonstrates that reducing settings has a larger impact on performance than reducing resolution, which is useful information for players who want to prioritize either visual quality or frame rate.

The Ultra settings preset at 4K produces 69 FPS, which is 25% lower than High at 4K (92 FPS) and 34% lower than Medium at 4K (105 FPS). The diminishing returns from Medium to High to Ultra at 4K are clear: Medium to High provides a 13 FPS reduction (from 105 to 92), while High to Ultra provides a 23 FPS reduction (from 92 to 69). This suggests that Ultra settings carry a disproportionate performance cost at 4K compared to the visual improvements it likely provides over High settings.