Lockdown Protocol

# Lockdown Protocol with Intel Core Ultra 7 270K Plus + NVIDIA GeForce RTX 4070 Ti

The benchmark data for Lockdown Protocol reveals a system pairing that delivers strong frame rates across all tested resolutions, but the scaling patterns expose an interesting dynamic between the Intel Core Ultra 7 270K Plus and the NVIDIA GeForce RTX 4070 Ti. At 1080p Low, this combo reaches 305 FPS average, while the same settings at 4K drop to 144 FPS — a 53% reduction that hints at where the performance bottleneck shifts as pixel count rises.

Resolution Scaling

The measured FPS rows across the three resolutions paint a clear picture of how this system scales with increasing pixel workloads. Moving from 1920x1080 to 2560x1440 at High settings, the average frame rate drops from 189 FPS to 139 FPS, a 26% reduction. The subsequent jump from 1440p to 3840x2160 at High brings the average down to 90 FPS, another 35% decline. This progressive scaling suggests that the graphics card becomes increasingly dominant as the resolution climbs, while the CPU maintains enough headroom to keep feeding frames.

At Low settings, the scaling curve is steeper in percentage terms. The 1080p Low result of 305 FPS falls to 224 FPS at 1440p (27% lower) and then to 144 FPS at 4K (36% lower than 1440p). The fact that 4K Low still delivers 144 FPS — identical to the 4K Medium minimum FPS of 87 being far below that — indicates that even at the highest resolution, the RTX 4070 Ti is not fully saturated until settings climb. The gap between 1080p Low and 1440p Low of 81 FPS is substantial, and it narrows slightly to 80 FPS between 1440p Low and 4K Low, suggesting a fairly linear scaling pattern that is characteristic of GPU-bound workloads.

The Ultra preset reveals the steepest drops. At 1080p Ultra, the system averages 142 FPS; at 1440p Ultra, that falls to 104 FPS (27% lower); and at 4K Ultra, it plummets to 67 FPS (36% lower than 1440p). This 4K Ultra result is the only measured configuration that dips below the 90 FPS threshold commonly cited for smooth competitive play, and it shows that the combination of 4K resolution and maximum settings pushes the graphics card to its limits. The consistent percentage drops across settings — roughly 26-27% from 1080p to 1440p and 35-36% from 1440p to 4K — indicate that the limiting component at these settings is the GPU, not the CPU. If the processor were the constraint, the scaling from 1440p to 4K would show smaller percentage reductions because the GPU would already be waiting on the CPU at lower resolutions.

GPU Role

The NVIDIA GeForce RTX 4070 Ti brings 12 GB of GDDR6X memory on a 192-bit bus, with a bandwidth of 504.2 GB/s. The memory clock runs at 1313 MHz, which translates to 21 Gbps effective. The GPU's boost clock of 2610 MHz and base clock of 2310 MHz place it in a performance tier that the benchmark results confirm: the card sits at the 84th percentile versus all GPUs, with an average benchmark score of 44795. Its nearest rivals in the database include the NVIDIA GeForce RTX 5090 Mobile (0.8% higher score), the AMD Radeon Pro 5500 XT (1.3% higher), and the Intel Arc A730M (1.7% higher), while the NVIDIA RTX A6000 trails by 1.6%.

In Lockdown Protocol, the GPU's 12 GB VRAM appears sufficient across all tested configurations, as no settings combination produced a min FPS collapse that would indicate memory capacity issues. The 4K Medium result shows a min FPS of 87 and max of 118, which suggests the card is managing memory allocation effectively even at the highest pixel counts. The 21 Gbps effective memory speed and 504.2 GB/s bandwidth provide the data throughput needed to sustain the texture and geometry loads that Lockdown Protocol's FPS gameplay demands.

The Ada Lovelace architecture, built on TSMC's 5 nm process with 35,800 million transistors on a 294 mm² die, delivers 40.09 TFLOPS of FP32 performance. This compute capability directly correlates with the frame rates observed: at 1080p High, the card produces 189 FPS, and at 4K High, it maintains 90 FPS. The RTX 4070 Ti's 60 RT cores and 240 tensor cores are present in the silicon, though Lockdown Protocol's benchmark rows do not specify whether ray tracing or DLSS features are active in the measured presets. The 80 ROPs and 240 TMUs contribute to the pixel and texture throughput rates of 208.8 GPixel/s and 626.4 GTexel/s, respectively.

How This Combo Ranks

The combination of the Intel Core Ultra 7 270K Plus and the NVIDIA GeForce RTX 4070 Ti ranks 295th out of 2828 tested combos in Lockdown Protocol, placing it in the top 10.4% of all system pairings in the database. This percentile position reflects the strength of both components: the CPU holds the 96th percentile versus all CPUs with an average benchmark score of 93785, while the GPU sits at the 84th percentile. The system's ranking suggests that Lockdown Protocol is well-optimized for this hardware pairing, extracting performance that aligns with the individual component standings.

The CPU's nearest rivals in the overall benchmark database are all server-class processors: the Intel Xeon 6520P matches the Ultra 7 270K Plus exactly with a 0% delta, while the AMD EPYC 4564P scores 1.5% higher, the AMD EPYC 9175F scores 1.9% higher, and the AMD EPYC 4565P scores 2.1% higher. This clustering indicates that the Ultra 7 270K Plus delivers desktop-class performance that rivals enterprise silicon in synthetic workloads. For the GPU, the nearest rivals are a mix of mobile and professional parts, with the RTX 5090 Mobile edging out the 4070 Ti by 0.8% and the RTX A6000 trailing by 1.6%.

The combo rank of 295 out of 2828 means that 2533 other combinations in the database produce lower frame rates in Lockdown Protocol. This system outperforms the majority of tested configurations, though the presence of 294 combos ahead of it suggests there are faster pairings available, likely involving higher-tier GPUs or CPUs. The measured FPS data shows that this combo can exceed 300 FPS at 1080p Low, which positions it well for competitive play at standard refresh rates, while the 4K Ultra result of 67 FPS indicates that maximum visual fidelity at 4K will require compromises.

Settings Recommendations

Based on the measured FPS rows, the optimal settings balance depends on the target resolution and refresh rate. At 1920x1080, every preset delivers playable frame rates: Low averages 305 FPS, Medium averages 217 FPS, High averages 189 FPS, and Ultra averages 142 FPS. For a 144 Hz monitor at 1080p, the High preset offers a substantial visual upgrade over Low while still maintaining 189 FPS, leaving headroom above the refresh rate. The Ultra preset at 1080p, at 142 FPS, falls just short of 144 Hz, so users with 144 Hz displays would need to choose High to stay above the refresh threshold.

At 2560x1440, the Medium preset delivers 159 FPS with a min of 135 and max of 183, which comfortably exceeds 144 Hz. The High preset at 139 FPS is close to 144 Hz but does not guarantee sustained performance above it. For 1440p users with 144 Hz displays, Medium provides the best experience per the measured data: it maintains an average above the refresh rate while offering better visual quality than Low, which hits 224 FPS but with minimal graphical fidelity. The Ultra preset at 1440p, at 104 FPS, is suitable for 100 Hz displays but would be limiting for higher refresh rates.

At 3840x2160, the situation changes significantly. The Low preset averages 144 FPS, which is excellent for 4K, but the visual quality trade-off is substantial. The Medium preset at 103 FPS (min 87, max 118) provides a more balanced experience for 4K displays with 100 Hz refresh rates. The High preset at 90 FPS is playable but may feel less smooth on 120 Hz or 144 Hz 4K panels. The Ultra preset at 67 FPS is the only configuration that dips below 90 FPS, making it borderline for fast-paced FPS gameplay. For 4K, Medium appears to be the sweet spot: it delivers 103 FPS average while offering better visuals than Low, and the min FPS of 87 indicates that brief dips remain playable.

FAQ

Q: What is the highest average FPS this combo achieves in Lockdown Protocol?

A: The highest measured average is 305 FPS at 1920x1080 with Low settings. The next highest is 224 FPS at 2560x1440 Low.

Q: Can this system handle 4K gaming in Lockdown Protocol?

A: Yes, at 4K the combo averages 144 FPS on Low, 103 FPS on Medium, 90 FPS on High, and 67 FPS on Ultra. The Medium preset provides the best balance with an average above 100 FPS.

Q: How does the CPU's benchmark performance compare to its nearest rivals?

A: The Intel Core Ultra 7 270K Plus scores 93785 on average, with a 0% delta versus the Intel Xeon 6520P. The AMD EPYC 4564P scores 1.5% higher, the AMD EPYC 9175F scores 1.9% higher, and the AMD EPYC 4565P scores 2.1% higher.

Q: What is the GPU's percentile ranking among all tested graphics cards?

A: The NVIDIA GeForce RTX 4070 Ti sits at the 84th percentile versus all GPUs, with an average benchmark score of 44795. Its closest rival, the RTX 5090 Mobile, scores 0.8% higher.

Q: Is there a settings preset that provides a consistent frame rate above 144 FPS at 1440p?

A: Yes, the Medium preset at 2560x1440 averages 159 FPS with a min of 135 and max of 183. The Low preset averages 224 FPS, but Medium offers better visuals while still exceeding 144 FPS on average.

Q: How does this combo rank among all tested system pairings in Lockdown Protocol?

A: The combo ranks 295th out of 2828 tested combinations, placing it in the top 10.4% of all systems benchmarked in this game.

CPU Role

The Intel Core Ultra 7 270K Plus features 24 cores and 24 threads, with a base clock of 3.70 GHz and a boost clock of 5.50 GHz. This Arrow Lake Refresh processor, built on TSMC's 3 nm process with 17,800 million transistors, carries 36 MB of shared L3 cache alongside 192 KB of L1 and 3 MB of L2 per core. The CPU holds the 96th percentile versus all CPUs with an average benchmark score of 93785, placing it among the top desktop processors in the database.

In Lockdown Protocol, the CPU's role becomes evident when examining the FPS scaling across resolutions. At 1080p Low, the system hits 305 FPS — a frame rate that requires substantial CPU throughput to feed the GPU. The 24 cores and 24 threads, combined with the 5.50 GHz boost clock, provide the single-thread performance necessary for high-FPS FPS gameplay. The Cinebench R23 multi-core score of 44253 and single-core score of 2439 reflect strong overall processing capability, though the game's FPS mode likely benefits more from the single-core performance than the multi-core throughput.

The PassMark single-thread score of 5068 and multi-thread score of 68574 further confirm the CPU's balanced capabilities. The data compression score of 804322 and encryption score of 59097 indicate robust general-purpose performance, but for Lockdown Protocol specifically, the key metric is the processor's ability to maintain high frame pacing at low resolutions where the GPU is not the bottleneck. The fact that 1080p Low reaches 305 FPS while 4K Low drops to 144 FPS suggests that at 1080p, the CPU is contributing meaningfully to the frame rate ceiling. The 24 threads provide ample parallelism for background tasks and game logic, while the 5.50 GHz boost clock ensures responsive single-threaded performance for the game's main render thread.

The CPU's nearest rivals in the overall database are all EPYC server processors, which highlights its strong multi-threaded showing. However, in a game like Lockdown Protocol, the comparison to server chips is less relevant than the CPU's own internal balance: 24 cores at 125 W TDP with DDR5 memory support via dual-channel at 115.2 GB/s bandwidth. The 36 MB L3 cache supports game asset streaming, and the PCIe Gen 5 lanes (20 from the CPU) provide ample bandwidth for the RTX 4070 Ti's PCIe 4.0 x16 interface. The integrated Arc Xe-LPG Graphics 64EU is present but not utilized in this discrete GPU configuration.

Measured FPS Breakdown

The complete measured FPS dataset for Lockdown Protocol with this combo spans 12 configurations across three resolutions and four settings presets.

At 3840x2160, the Low preset averages 144 FPS with no min or max reported. The Medium preset averages 103 FPS with a min of 87 and max of 118, providing the only complete min/max data at 4K. The High preset averages 90 FPS with no min or max reported, while the Ultra preset averages 67 FPS with no min or max reported. The spread from Low to Ultra at 4K is 77 FPS, from 144 down to 67, showing a 53% reduction in frame rate when moving from the lowest to highest quality settings.

At 2560x1440, the Low preset averages 224 FPS with no min or max reported. The Medium preset averages 159 FPS with a min of 135 and max of 183, again providing the only complete min/max data at this resolution. The High preset averages 139 FPS with no min or max reported, while the Ultra preset averages 104 FPS with no min or max reported. The spread from Low to Ultra at 1440p is 120 FPS, from 224 down to 104, a 54% reduction.

At 1920x1080, the Low preset averages 305 FPS with no min or max reported. The Medium preset averages 217 FPS with a min of 184 and max of 249, representing the highest min FPS across all measured configurations. The High preset averages 189 FPS with no min or max reported, while the Ultra preset averages 142 FPS with no min or max reported. The spread from Low to Ultra at 1080p is 163 FPS, from 305 down to 142, a 53% reduction.

The Medium preset at each resolution is the only setting with complete min/max data, offering insight into frame pacing. At 1080p Medium, the min of 184 and max of 249 show a 65 FPS range, indicating solid consistency. At 1440p Medium, the range narrows to 48 FPS (135 to 183), while at 4K Medium, the range broadens to 31 FPS (87 to 118). This pattern suggests that as resolution increases, the frame rate becomes more stable relative to the average, which is consistent with GPU-bound behavior where the graphics card maintains a more consistent workload. The 4K Medium min of 87 FPS is the only measured minimum below 100 FPS, indicating that even the slowest frames at 4K Medium remain playable for most users.