Lockdown Protocol

The AMD Ryzen 9 7900X and AMD Radeon RX 9070 XT pairing delivers a performance profile in Lockdown Protocol that is heavily dictated by resolution and the game's graphical presets. The data reveals a system capable of triple-digit frame rates at mainstream resolutions but one that also shows clear signs of where the bottleneck shifts between the CPU and GPU. The measured results provide a detailed look at how this specific combination of a 12-core Zen 4 processor and a RDNA 4.0 graphics card scales under the demands of this FPS title.

FAQ

*Q: What is the overall performance ranking of this CPU and GPU combination in Lockdown Protocol?*

A: The combo ranks 874th out of 3,714 tested combinations, placing it in the top 23.5% of all systems tested for this game.

Q: What is the highest average frame rate achieved by this system in the measured data?

A: The highest average frame rate recorded is 260 FPS, which was achieved at 1920x1080 resolution with the Low settings preset.

Q: How does the frame rate scale from 1080p to 1440p at the High preset?

A: At the High preset, the average frame rate drops from 161 FPS at 1920x1080 to 118 FPS at 2560x1440. This represents a 43 FPS (approximately 26.7%) decrease when moving to the higher resolution.

Q: What is the performance difference between the Low and Ultra presets at 4K?

A: At 3840x2160, the Low preset produces an average of 123 FPS, while the Ultra preset produces only 57 FPS. This is a significant 66 FPS difference, indicating that the Ultra preset nearly halves the performance of the Low preset at 4K.

Q: Does the Radeon RX 9070 XT have enough VRAM for this game?

A: The GPU is equipped with 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth. The measured data does not indicate any performance degradation or errors related to memory capacity, suggesting this configuration is sufficient for the tested settings and resolutions.

Q: What is the lowest average frame rate recorded in the dataset?

A: The lowest average frame rate recorded is 57 FPS, which occurs at 3840x2160 resolution with the Ultra settings preset.

GPU Role

The AMD Radeon RX 9070 XT is the primary driver of graphical performance in Lockdown Protocol. Its role becomes more pronounced as resolution and graphical fidelity increase. The GPU features a boost clock of 2970 MHz and a game clock of 2400 MHz, with a base clock of 1660 MHz. This substantial clock speed range allows the card to dynamically adjust its performance based on the workload.

The card's 16 GB of GDDR6 VRAM is a key asset. At the highest resolutions like 3840x2160, texture data and geometry requirements can be substantial. With a memory bandwidth of 644.6 GB/s, the RX 9070 XT has the throughput to feed its 4096 shading units and 128 ROPs, minimizing potential stalls from memory bottlenecks. The data suggests that at the Ultra preset, the GPU is being pushed hard, as evidenced by the 57 FPS average at 4K. This is the most demanding scenario in the dataset, and the performance drop from 87 FPS at Medium to 57 FPS at Ultra indicates a heavy computational load that the GPU struggles to maintain at playable levels for high-refresh-rate displays.

However, the GPU's benchmark context is interesting. Its avgBenchmarkScore is 13543, placing it in the 55th percentile of all GPUs. Its nearest rivals in the database are older or lower-tier cards like the NVIDIA GeForce GTX 570 and AMD Radeon HD 7770M, with deltaPct values of 0.2% and 0.1% respectively. This is a curious data point, as it suggests that in generic compute benchmarks, the RX 9070 XT's scores are much closer to these legacy parts than one would expect from its specifications. This could imply that the PassMark G3D score of 26795 is weighed down by other sub-tests, or that the GPU's architecture is heavily optimized for specific modern workloads that are not represented in the average benchmark score. Regardless, in Lockdown Protocol, the GPU's actual measured performance shows a strong ability to deliver high frame rates at lower presets, but it becomes the limiting factor at 4K Ultra.

CPU Role

The AMD Ryzen 9 7900X provides the computational foundation for this system, and its role is most evident at lower resolutions and settings where the GPU is not the primary constraint. With 12 cores and 24 threads based on the Zen 4 architecture, this processor is a multi-threaded powerhouse. Its base clock of 4.70 GHz and boost clock of 5.60 GHz are high, ensuring strong single-thread performance, which is often critical for game logic and draw calls in FPS titles.

The CPU's benchmark scores reflect its capability. A Cinebench R23 multicore score of 29300 and a single-core score of 2016.5 show a balanced performance profile. More importantly, the 3DMark 16-thread score of 10972 and the max-thread score of 12536 indicate that it can handle significant multi-threaded workloads. In Lockdown Protocol, this processing power is likely what enables the system to hit 260 FPS at 1080p Low. At this resolution and preset, the GPU is not heavily taxed, so the CPU's ability to process game state and issue rendering commands becomes the determining factor. The high boost clock of 5.60 GHz helps ensure that the game's main thread is not starved.

The CPU's avgBenchmarkScore is 53288, placing it in the 91st percentile of all CPUs. It sits in a tight pack of rivals, including the Intel Core i7-14700F (deltaPct -0.6%) and the AMD EPYC 7313P (deltaPct 0.2%). This indicates that despite being a generation old, the 7900X remains a highly competitive processor. In the context of this game, the CPU does not appear to be a major bottleneck until the GPU can produce exceptionally high frame rates. The 191 FPS at 1440p Low and 260 FPS at 1080p Low suggest that the CPU is capable of feeding the GPU with data far beyond what is needed for a 60 FPS experience, but it also sets the ceiling for how high frame rates can go in less demanding scenarios.

How This Combo Ranks

The combination of the Ryzen 9 7900X and RX 9070 XT holds the 874th rank out of 3714 tested combos in Lockdown Protocol. This places it in the upper quartile of all tested systems, indicating a strong overall performance level. However, the data suggests that this ranking is not uniform across all settings.

The system's performance relative to its rank is consistent with a high-end pairing. It is not near the top 100, which would likely be occupied by the absolute fastest consumer CPUs and GPUs, but it is also far from the median. The 874th rank suggests that many other combinations, likely those with more recent top-tier GPUs, can outperform it. The GPU's 55th percentile ranking in the general database is a point of consideration. While the CPU is in the 91st percentile, the GPU is only slightly above average. This asymmetry suggests that the combo's rank is likely held back by the GPU, especially in scenarios that are graphically intensive.

In Lockdown Protocol, this means the combo is likely to be a very capable 1440p performer and a decent 4K performer at medium presets. The rank of 874 also implies that there are thousands of other combinations that deliver higher average frame rates, particularly at lower resolutions where the CPU is more important. For example, a system with a slightly slower CPU but a much faster GPU might rank higher because it would achieve higher frame rates at 4K Ultra. The data points to a system where the CPU has more headroom than the GPU, making it a balanced but not top-tier contender for this specific game.

Resolution Scaling

The measured FPS data shows a clear and predictable pattern of performance degradation as resolution increases from 1920x1080 to 3840x2160. This scaling reveals the changing nature of the bottleneck.

At the Low preset, the average frame rates are 260 FPS at 1080p, 191 FPS at 1440p, and 123 FPS at 4K. The drop from 1080p to 1440p is 69 FPS (26.5%), and from 1440p to 4K is another 68 FPS (35.6%). This indicates that even at Low settings, the GPU is still being taxed by the increased pixel count. The CPU is likely able to keep up with the demand, but the GPU's rendering load is the limiting factor.

At the High preset, the average frame rates are 161 FPS at 1080p, 118 FPS at 1440p, and 76 FPS at 4K. The percentage drops are 26.7% from 1080p to 1440p and 35.6% from 1440p to 4K. This pattern is very similar to the Low preset, showing that the scaling is consistent regardless of the preset. The absolute frame rates are lower because the GPU is doing more work per frame, but the relative impact of resolution is the same.

At the Ultra preset, the average frame rates are 121 FPS at 1080p, 89 FPS at 1440p, and 57 FPS at 4K. The drop from 1080p to 1440p is 32 FPS (26.4%), and from 1440p to 4K is another 32 FPS (35.9%). This consistent scaling pattern across all presets strongly implies that the GPU is the primary limiting component in Lockdown Protocol for this system. If the CPU were the bottleneck, we would expect to see a smaller performance drop when moving from 1080p to higher resolutions, as the GPU would have more headroom. Instead, the frame rate drops proportionally with the number of pixels, which is a classic sign of a GPU-bound scenario.

Measured FPS Breakdown

The detailed measurements provide a comprehensive view of this system's performance.

1920x1080:

• Low: Average FPS is 260. This is the highest score in the entire dataset, indicating a very CPU-bound scenario.
• Medium: Average FPS is 185, with a minimum of 157 and a maximum of 212 FPS.
• High: Average FPS is 161.
• Ultra: Average FPS is 121.

2560x1440:

• Low: Average FPS is 191.
• Medium: Average FPS is 135, with a minimum of 115 and a maximum of 156 FPS.
• High: Average FPS is 118.
• Ultra: Average FPS is 89.

3840x2160:

• Low: Average FPS is 123.
• Medium: Average FPS is 87, with a minimum of 74 and a maximum of 100 FPS.
• High: Average FPS is 76.
• Ultra: Average FPS is 57.

The data shows a smooth progression of performance. At 1080p, the system is capable of very high refresh rates, even at Ultra settings where it still averages 121 FPS. The 260 FPS at Low suggests that the 12-core CPU is not a limiting factor for high-refresh-rate gaming at this resolution. As resolution increases, the frame rates begin to drop more significantly. At 4K, the system can only achieve a 60 FPS average at the Low preset, and it falls below that to 57 FPS at Ultra. The Medium preset at 4K shows an average of 87 FPS with a minimum of 74 FPS, which is the only 4K scenario where the minimum is recorded, and it is still above the 60 FPS threshold.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend entirely on the user's target resolution and refresh rate.

For 1920x1080 displays, the Ultra preset is highly recommended. The average of 121 FPS is well above the 60 FPS threshold and is smooth enough for most high-refresh-rate monitors. The High preset at 161 FPS would be better suited for 144Hz or 165Hz displays, while the Medium preset's 185 FPS could satisfy even higher refresh rates. The Low preset's 260 FPS is overkill for any current mainstream monitor, so the visual quality sacrifice is not worth it.

For 2560x1440 displays, the High preset is the best balance. The 118 FPS average is excellent for a 144Hz monitor, and the visual quality is significantly better than Medium or Low. The Ultra preset still provides a very playable 89 FPS, which is fine for a 90Hz or 100Hz display. The Medium preset's 135 FPS is also a good option for those seeking maximum frame rates without dropping to Low.

For 3840x2160 displays, the Medium preset is the sweet spot. The 87 FPS average is solidly above 60 FPS, and the minimum of 74 FPS ensures there are no significant dips below that threshold. The High preset's 76 FPS is still technically playable but may not be consistent enough for highly competitive play. The Ultra preset at 57 FPS is below the 60 FPS target and should be avoided. The Low preset at 123 FPS is an option for those prioritizing performance above all else, but the visual compromise is substantial at this resolution.

In summary, the data shows that this system is best utilized at 1440p, where it can offer high frame rates with high visual fidelity. At 4K, users should stick to the Medium preset to ensure a consistently smooth experience. The CPU's strength ensures that at lower resolutions, the frame rates are high, but the GPU's limits are clearly exposed at 4K Ultra.