Archeage

Settings Recommendations

The measured frame data for ArcheAge with the AMD Ryzen 9 7900X and AMD Radeon RX 9070 XT reveals a clear hierarchy across the four available presets. At 1920x1080, the Low preset delivers an average of 212.4 FPS, which is the highest measured value in the entire dataset. Medium follows at 186.5 FPS, High at 129.9 FPS, and Ultra drops to 89.2 FPS. The gap between Low and Medium is 25.9 FPS, while the drop from Medium to High is 56.6 FPS — a substantial reduction that indicates the High preset imposes a significantly heavier rendering load.

At 2560x1440, the pattern repeats but with compressed margins. Low produces 142.8 FPS, Medium 124.3 FPS, High 87.7 FPS, and Ultra 57 FPS. The step from Low to Medium costs 18.5 FPS, while the move from Medium to High costs 36.6 FPS. The Ultra preset at this resolution falls below the 60 FPS threshold, which is a notable consideration for smooth gameplay. At 3840x2160, the situation becomes more constrained: Low averages 83.7 FPS, Medium 74.1 FPS, High 49.1 FPS, and Ultra 31.9 FPS. Only the Low and Medium presets maintain playable averages at 4K.

For the best experience across all resolutions, the Medium preset offers the most balanced trade-off. It stays above 60 FPS at 1440p (124.3 FPS) and 1080p (186.5 FPS), and remains reasonably playable at 4K (74.1 FPS). The High preset is only advisable at 1080p or 1440p, where it still delivers 129.9 and 87.7 FPS respectively, but it falls below 50 FPS at 4K. The Ultra preset should be avoided at 1440p and above, as it drops to 57 FPS and 31.9 FPS respectively. Given that this is an MMORPG where consistent frame pacing matters for large-scale encounters, Medium at 1440p provides the most comfortable margin without sacrificing visual fidelity excessively.

GPU Role

The AMD Radeon RX 9070 XT brings 16 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 644.6 GB/s. Memory clocks run at 2518 MHz, translating to 20.1 Gbps effective. The GPU operates with a base clock of 1660 MHz, a game clock of 2400 MHz, and a boost clock of 2970 MHz. These specifications position the card in the 82nd percentile among all GPUs in the benchmark database, with an average benchmark score of 39647.

The data shows that the GPU's memory subsystem plays a critical role in ArcheAge's performance scaling. At 1080p, the difference between Low and Medium settings is 25.9 FPS, but at 4K, that same settings step only yields a 9.6 FPS difference. This compression at higher resolutions suggests that the rendering pipeline becomes more dependent on the GPU's compute throughput rather than memory bandwidth alone. The RX 9070 XT's 48.66 TFLOPS of FP32 performance and 380.2 GPixel/s pixel rate are the primary drivers of the observed frame rates at 4K, where the Ultra preset drops to 31.9 FPS — a clear indication of pixel shader limitations under maximum load.

The GPU's nearest rivals in the benchmark database include the AMD Radeon Pro 575 (deltaPct -0.1), NVIDIA RTX A500 Mobile (deltaPct 0.2), AMD Radeon Pro 575X (deltaPct -0.5), and AMD Radeon RX Vega 64 (deltaPct -0.6). These deltas are all within one percentage point, meaning the RX 9070 XT's overall benchmark position is essentially tied with these older or mobile-class cards, despite its newer RDNA 4.0 architecture. In ArcheAge specifically, the measured frame rates demonstrate that the GPU is capable of high refresh rates at 1080p but becomes the limiting factor at 4K Ultra, where the 16 GB frame buffer and 644.6 GB/s bandwidth are insufficient to maintain fluid motion.

How This Combo Ranks

The combination of the AMD Ryzen 9 7900X and AMD Radeon RX 9070 XT ranks 404th out of 1727 tested combos in ArcheAge, placing it in the top 23.4 percent of all configurations in the database. This rank reflects the aggregate performance across all resolutions and settings, weighted by the measured data. The percentile position indicates that while this combo is not at the absolute top tier, it outperforms the majority of tested systems in this specific game.

The ranking is particularly notable given the individual component percentiles: the CPU sits in the 93rd percentile among all processors, while the GPU is in the 82nd percentile. The combo rank of 404 out of 1727 suggests that ArcheAge's performance is more heavily influenced by the GPU than the CPU, since the combo's relative position (top 23.4%) is closer to the GPU's percentile than the CPU's. This aligns with the observed frame rates at higher resolutions, where the GPU's rendering capabilities dominate the results. At 1080p Low, the combo achieves 212.4 FPS, which is likely near the upper limit of what the game engine can deliver, but at 4K Ultra, the 31.9 FPS result shows the GPU struggling with the full shader load.

Measured FPS Breakdown

At 1920x1080, the measured averages are: Low 212.4 FPS, Medium 186.5 FPS, High 129.9 FPS, and Ultra 89.2 FPS. The spread from Low to Ultra is 123.2 FPS, representing a 58 percent reduction in frame rate when moving to maximum settings. The step from High to Ultra alone costs 40.7 FPS, which is the largest single settings penalty at this resolution.

At 2560x1440, the averages are: Low 142.8 FPS, Medium 124.3 FPS, High 87.7 FPS, and Ultra 57 FPS. The gap between Low and Medium narrows to 18.5 FPS, while the Medium to High drop is 36.6 FPS. The High to Ultra transition costs 30.7 FPS, and the Ultra preset falls below the 60 FPS line, which may cause perceptible stutter in fast-paced combat sequences.

At 3840x2160, the averages are: Low 83.7 FPS, Medium 74.1 FPS, High 49.1 FPS, and Ultra 31.9 FPS. The difference between Low and Medium is only 9.6 FPS, indicating diminishing returns from the lowest settings at 4K. The Medium to High step is 25 FPS, and High to Ultra is 17.2 FPS. None of the 4K results approach the 144 Hz refresh rates achievable at 1080p, and only Low and Medium maintain averages above 60 FPS.

Comparing across resolutions for the same settings, the Low preset scales from 212.4 FPS at 1080p to 142.8 FPS at 1440p (a 32.8 percent reduction) and then to 83.7 FPS at 4K (a 41.4 percent further reduction). The Ultra preset scales from 89.2 FPS at 1080p to 57 FPS at 1440p (36.1 percent reduction) and to 31.9 FPS at 4K (44 percent reduction). The scaling behavior is roughly consistent, suggesting that resolution scaling is not dramatically affected by the settings preset.

FAQ

Q: What is the best resolution for this combo in ArcheAge?

A: The data shows that 2560x1440 with Medium settings provides 124.3 FPS, which offers a good balance between visual quality and smoothness. At 1080p, the combo achieves 186.5 FPS on Medium, while at 4K Medium it drops to 74.1 FPS.

Q: How does the Ultra preset perform at different resolutions?

A: The Ultra preset delivers 89.2 FPS at 1080p, 57 FPS at 1440p, and 31.9 FPS at 4K. The 1440p result falls below 60 FPS, and the 4K result is below 32 FPS, making Ultra unsuitable for high-resolution play.

Q: What is the frame rate difference between Low and High settings?

A: At 1080p, Low (212.4 FPS) is 82.5 FPS ahead of High (129.9 FPS). At 1440p, Low (142.8 FPS) is 55.1 FPS ahead of High (87.7 FPS). At 4K, Low (83.7 FPS) is 34.6 FPS ahead of High (49.1 FPS).

Q: Is the combo able to maintain 60 FPS at 4K?

A: Only the Low (83.7 FPS) and Medium (74.1 FPS) presets exceed 60 FPS at 3840x2160. The High preset averages 49.1 FPS, and Ultra averages 31.9 FPS.

Q: How does this combo rank among all tested configurations?

A: The combo ranks 404th out of 1727 tested combinations in ArcheAge, placing it in the top 23.4 percent of all systems in the benchmark database.

Q: What is the largest frame rate drop between consecutive settings?

A: The largest single settings penalty is the High to Ultra transition at 1080p, which costs 40.7 FPS (from 129.9 to 89.2 FPS). At 1440p, the same transition costs 30.7 FPS, and at 4K it costs 17.2 FPS.

CPU Role

The AMD Ryzen 9 7900X is a 12-core, 24-thread processor based on the Zen 4 architecture (codenamed Raphael), built on a 5 nm process at TSMC. It has a base clock of 4.70 GHz and a boost clock of 5.60 GHz, with a TDP of 170 W. The cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and 64 MB of shared L3 cache. The CPU supports DDR5 memory with dual-channel configuration and a bandwidth of 83.2 GB/s.

In the benchmark database, the 7900X sits in the 93rd percentile among all CPUs, with an average benchmark score of 50556. Its nearest rivals are all within one percentage point: the Intel Core Ultra 5 235 (deltaPct -0.1), AMD Ryzen 9 5900XT (deltaPct -0.4), Intel Core i7-13850HX (deltaPct -0.5), and Intel Core i9-13980HX (deltaPct -0.8). The CPU's multi-threaded performance is strong, with a Cinebench R23 multi-core score of 43695 and a single-core score of 6168, but ArcheAge's frame rates do not show a clear dependence on CPU threading.

The measured FPS data reveals that the CPU is not the primary bottleneck in most scenarios. At 1080p Low, the combo achieves 212.4 FPS, which is likely near the engine's maximum frame rate cap, and the CPU's 24 threads provide ample headroom for MMORPG workloads that involve many player characters and NPCs. However, at 4K Ultra, the frame rate drops to 31.9 FPS, and the GPU's rendering load is the limiting factor, not the CPU's processing capability. The CPU's 64 MB of L3 cache and 5.60 GHz boost clock help maintain consistent frame rates in CPU-bound scenarios, but the data does not show a scenario where the CPU becomes the limiting factor — even at 1080p Low, the frame rate stays above 200 FPS, indicating that the CPU can feed the GPU effectively.

The combo rank of 404 out of 1727 in ArcheAge, combined with the CPU's 93rd percentile standing, suggests that the processor is more than adequate for this game. The 12-core configuration with 24 threads is well-suited for an MMORPG that may spawn many simulation threads, but the observed performance scaling is more closely tied to the GPU's settings and resolution. The CPU's 83.2 GB/s memory bandwidth and dual-channel DDR5 support ensure that data transfer between the processor and memory is not a limiting factor in the measured results.