Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 7 5800XT + NVIDIA GeForce RTX 3060 Ti

The measured performance of this combination in Lockdown Protocol reveals a system that scales predictably across resolutions, with the RTX 3060 Ti acting as the primary performance governor at higher settings while the Ryzen 7 5800XT's 8-core/16-thread configuration proves sufficient to keep frame rates competitive at lower presets. This pairing sits at rank 870 out of 1637 tested combos, placing it in the upper-middle tier of configurations, which aligns with the GPU's 69th percentile standing among all graphics cards and the CPU's 86th percentile among all processors. The data shows a system that can handle the game comfortably at 1080p and 1440p, but struggles to maintain smooth frame rates at 4K when visual fidelity is pushed to maximum.

Resolution Scaling

The FPS drop from 1080p to 4K follows a steep curve that clearly identifies the GPU as the limiting component at higher resolutions. At Low settings, the system delivers 196.5 FPS at 1080p, which falls to 145.4 FPS at 1440p — a 26% reduction — and then to 94.8 FPS at 4K, representing a further 35% drop. This pattern intensifies as settings increase: at High, the transition from 1080p (121.9 FPS) to 1440p (86.7 FPS) costs 29%, while moving to 4K (57.5 FPS) costs another 34%. The scaling suggests that pixel throughput, not geometry or draw calls, dominates the performance equation once resolution climbs.

At Ultra settings, the resolution penalty becomes even more pronounced. The system drops from 90.3 FPS at 1080p to 64.7 FPS at 1440p — a 28% loss — and then to 43.1 FPS at 4K, a 33% further reduction. These consistent percentage drops across all settings indicate that the RTX 3060 Ti's 8 GB of GDDR6 memory and 256-bit bus are being saturated by the increased pixel workload, rather than any CPU-side bottleneck emerging. The fact that the percentage losses remain roughly constant regardless of preset suggests the GPU's compute units, not its memory subsystem, are the binding constraint.

Interestingly, the gap between 1440p and 4K remains larger than the gap between 1080p and 1440p at every settings level. This nonlinear scaling points to the 448.0 GB/s memory bandwidth becoming increasingly strained as the resolution pushes toward 4K, where the fill rate demands of the game's FPS environments — likely including particle effects and dynamic lighting — exceed what the card can efficiently process. The data implies that 1440p is the sweet spot for this combo, while 4K should be reserved for less demanding titles.

GPU Role

The NVIDIA GeForce RTX 3060 Ti, built on the Ampere architecture with a GA104 chip, brings 4864 shading units, 152 texture mapping units, and 80 ROPs to the table. Its boost clock of 1665 MHz and base clock of 1410 MHz, combined with 8 GB of GDDR6 memory on a 256-bit bus, deliver a measured bandwidth of 448.0 GB/s. In Lockdown Protocol, these specifications translate to a card that can comfortably handle 1080p at every preset, with even Ultra settings producing 90.3 FPS. The card's FP32 throughput of 16.20 TFLOPS appears sufficient for the game's rendering workload at lower resolutions.

However, the GPU's 69th percentile ranking among all graphics cards — with an average benchmark score of 25120 — places it just ahead of the AMD Radeon RX 6700M (25180, -0.2% delta) and AMD Radeon RX 6600 (25235, -0.5% delta). This tight cluster of rivals suggests the RTX 3060 Ti is positioned at a performance tier where small architectural differences yield negligible real-world deltas. In Lockdown Protocol specifically, the card's 38 RT cores and 152 tensor cores — while not directly benchmarked in this title — indicate ray tracing capabilities that may affect performance if enabled, though the measured data does not specify RT settings.

The VRAM allocation of 8 GB is worth scrutinizing given the 4K results. At 4K Ultra, the system manages only 43.1 FPS, which suggests the frame buffer is being pushed to its limits. The memory clock of 1750 MHz (14 Gbps effective) provides 448.0 GB/s of bandwidth, which is substantial for a mid-range card but evidently insufficient for maintaining playable frame rates at 4K with maximum settings. The data shows that dropping to 4K Low recovers 94.8 FPS, indicating that texture and shader complexity — not raw resolution — are what strain the memory subsystem.

CPU Role

The AMD Ryzen 7 5800XT, with its 8 cores and 16 threads based on the Zen 3 Vermeer architecture, provides a robust foundation for this gaming workload. Its base clock of 3.80 GHz and boost clock of 4.80 GHz, combined with 32 MB of L3 cache, deliver strong single-threaded performance — as evidenced by its 3dmark single-thread score of 959 and Cinebench R23 single-core score of 3359. These scores are critical for FPS titles like Lockdown Protocol, where game logic and physics often depend on a few heavily loaded threads.

The CPU's multi-threaded capabilities are equally impressive, with a Cinebench R23 multicore score of 23794 and a 3dmark 16-thread score of 7683. In Lockdown Protocol, this translates to ample headroom for background processes and game engine threads. At 1080p Low, the system achieves 196.5 FPS, which strongly suggests the CPU is not limiting performance at lower resolutions — the frame rate is high enough that the GPU is likely the bottleneck even in this favorable scenario. The CPU's 86th percentile ranking among all processors, with an average benchmark score of 29774, places it within 0.3% of rivals like the AMD Ryzen 7 7840H (29868, -0.3% delta) and AMD Ryzen 7 PRO 5755GE (29740, 0.1% delta).

Notably, the CPU's performance does not appear to degrade at higher resolutions, as the FPS drops between resolutions are consistent regardless of settings. This indicates that the Ryzen 7 5800XT maintains its performance headroom even as the GPU becomes more strained. The 105 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are adequate for this workload, with no evidence of memory bandwidth bottlenecks appearing in the measured data. The CPU's PCIe Gen 4 interface with 20 lanes provides sufficient bandwidth for the RTX 3060 Ti's PCIe 4.0 x16 connection.

FAQ

Q: Can this combo run Lockdown Protocol at 4K smoothly?

A: The data shows 4K performance ranges from 94.8 FPS at Low settings to 43.1 FPS at Ultra. Only the Low preset exceeds 60 FPS at 4K, so smooth 4K play requires significant settings reductions.

Q: What is the best resolution for this system?

A: 1440p provides the most balanced experience, with frame rates from 145.4 FPS at Low to 64.7 FPS at Ultra. This resolution keeps all presets above 60 FPS while offering better visual fidelity than 1080p.

Q: How does the RTX 3060 Ti compare to its nearest rivals?

A: The GPU's average benchmark score of 25120 is within 0.7% of the AMD Radeon RX 580 2048SP (25287, -0.7% delta) and within 0.5% of the AMD Radeon RX 6600 (25235, -0.5% delta), indicating near-parity performance.

Q: Is the Ryzen 7 5800XT a bottleneck in this game?

A: At 1080p Low with 196.5 FPS, the CPU is clearly not limiting performance. The consistent FPS scaling across resolutions suggests the GPU is the primary constraint at all settings.

Q: What FPS can I expect at 1080p with High settings?

A: The measured average is 121.9 FPS at 1920x1080 with High settings, which is well above the 60 FPS threshold for smooth gameplay and suitable for high-refresh-rate monitors.

Q: How does this combo rank among all tested configurations?

A: It ranks 870 out of 1637 total combinations, placing it in the 53rd percentile of tested systems for Lockdown Protocol.

How This Combo Ranks

At rank 870 out of 1637 tested combos, the AMD Ryzen 7 5800XT + NVIDIA GeForce RTX 3060 Ti pairing sits almost exactly at the median of all configurations tested in Lockdown Protocol. This positioning is somewhat surprising given the CPU's strong 86th percentile standing and the GPU's respectable 69th percentile, suggesting that the game's performance characteristics may favor different hardware combinations. The data implies that while each component performs well individually, their combined performance in this specific title doesn't boost them above the middle of the pack.

This rank becomes more meaningful when considering the component-level rivalries. The CPU's nearest rival, the AMD Ryzen 7 PRO 5755GE, scores within 0.1%, while the GPU's closest competitor, the AMD Radeon RX 6700M, is within 0.2%. These negligible deltas suggest that swapping in nearly any comparable component would yield similar results in Lockdown Protocol. The combo's ranking likely reflects the GPU's mid-tier positioning rather than any deficiency in the CPU, as the measured FPS data consistently shows GPU-limited behavior across resolutions.

Measured FPS Breakdown

The complete measured dataset reveals a clear performance hierarchy across resolutions and settings:

At 3840x2160, the system delivers 94.8 FPS on Low, 68 FPS on Medium, 57.5 FPS on High, and 43.1 FPS on Ultra. The 51.7 FPS spread between Low and Ultra at 4K demonstrates the significant impact of settings on performance at this resolution.

At 2560x1440, performance improves substantially: 145.4 FPS on Low, 104.9 FPS on Medium, 86.7 FPS on High, and 64.7 FPS on Ultra. The 80.7 FPS spread between presets shows greater headroom for settings adjustments at this resolution.

At 1920x1080, the system achieves its highest frame rates: 196.5 FPS on Low, 141.6 FPS on Medium, 121.9 FPS on High, and 90.3 FPS on Ultra. The 106.2 FPS spread between Low and Ultra highlights the CPU's ability to feed the GPU at lower resolutions, where even Ultra settings maintain playable performance.

The progression from Low to Ultra at each resolution shows a consistent pattern: Medium typically costs 25-30% of the Low preset's performance, High adds another 10-15% penalty, and Ultra represents a further 15-20% reduction. This suggests the game's settings tiers scale rendering complexity relatively evenly.

Settings Recommendations

For 4K gaming, the data strongly favors the Low preset, which delivers 94.8 FPS compared to 68 FPS on Medium and 57.5 FPS on High. The Low setting at 4K provides the only smooth experience at this resolution, with frame rates well above the 60 FPS threshold. Medium at 4K remains playable at 68 FPS, but the 26.8 FPS penalty from Low to Medium may not justify the visual improvement for competitive play.

At 1440p, the Medium preset at 104.9 FPS offers the best balance of visual quality and performance, with High at 86.7 FPS also remaining smooth. Ultra at 64.7 FPS is technically playable but sits close to the 60 FPS minimum, making it risky for scenes with heavy action. Low at 145.4 FPS is ideal for competitive players prioritizing frame rate over visuals.

For 1080p, the Ultra preset at 90.3 FPS provides the full visual experience while maintaining high frame rates. High at 121.9 FPS is the choice for players with 120 Hz monitors, while Medium at 141.6 FPS and Low at 196.5 FPS cater to competitive gamers seeking maximum responsiveness. Given the data, 1080p Ultra represents the best overall experience, delivering the highest visual fidelity without compromising playability.