Lockdown Protocol

The AMD Ryzen 7 5700 and NVIDIA GeForce RTX 3070 Ti pairing delivers a solid but not overwhelming experience in Lockdown Protocol, an FPS title that clearly rewards both CPU and GPU muscle. The measured frame rates across resolutions and settings tell a story of a balanced system that starts to show its limits only at the highest graphical presets and pixel counts.

Resolution Scaling

The FPS drop from 1080p to 4K is steep, and the pattern reveals which component is doing the heavy lifting. At Low settings, the transition from 1920x1080 to 3840x2160 sees average frame rates fall from 225 FPS to 106 FPS — a reduction of 119 FPS, or roughly 53%. At High settings, the same resolution jump drops the average from 139 FPS at 1080p to 66 FPS at 4K, a 73 FPS decline (about 53%). This consistent halving of performance when pixel count quadruples points directly at the GPU as the primary bottleneck.

The data suggests that at 1080p Low, the system is heavily CPU-limited. The Ryzen 7 5700’s 8 cores and 16 threads, with a boost clock of 4.60 GHz, are capable of feeding the RTX 3070 Ti at 225 FPS, but the processor’s ceiling appears to be well above that. When the resolution increases to 1440p, the average at Low settings is 165 FPS, which is still extremely high and indicates the GPU is only beginning to take over the limiting role. By 4K Low, the 106 FPS average shows the RTX 3070 Ti is now the clear constraint, as the pixel workload has scaled beyond what the GPU’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth can sustain at such high frame rates.

Looking at the Ultra preset, the scaling is even more telling. At 1080p Ultra, the average is 105 FPS; at 1440p Ultra, it drops to 77 FPS; and at 4K Ultra, it falls to 49 FPS. The drop from 1080p to 1440p is 28 FPS (about 27%), while the drop from 1440p to 4K is another 28 FPS (about 36%). This accelerating decline at higher resolutions is classic GPU-bound behavior, with the RTX 3070 Ti’s 21.75 TFLOPS of FP32 compute and 169.9 GPixel/s pixel rate being overwhelmed by the combined load of Ultra settings and high pixel counts.

GPU Role

The RTX 3070 Ti is an Ampere-architecture part with 6144 shading units, 192 texture mapping units, and 96 ROPs. Its base clock of 1575 MHz and boost clock of 1770 MHz are modest by modern standards, but the sheer number of cores compensates. The memory subsystem is where this card shows its age: 8 GB of GDDR6X on a 256-bit bus yields 608.3 GB/s of bandwidth. In Lockdown Protocol, this bandwidth appears sufficient for 1080p and 1440p gaming at most settings, but the 4K Ultra result of 49 FPS suggests the 8 GB capacity might be a limiting factor, as texture-heavy scenes at 4K can exceed that allocation, forcing slower memory management.

The GPU’s benchmark scores reinforce its position. The 3DMark Steel Nomad DX12 score of 3478 places it in the 75th percentile of all GPUs, with an average benchmark score of 29945. Its nearest rivals include the NVIDIA GeForce RTX 5070 Mobile (average score 29928, deltaPct 0.1) and the AMD Radeon RX 6800 (average score 30095, deltaPct -0.5). This means the RTX 3070 Ti is essentially a peer of those cards in raw compute, differing by less than 1% in aggregate performance. The fact that it trails the RX 6800 by just 0.5% in average score but delivers 66 FPS at 4K High in Lockdown Protocol indicates that game-specific optimizations and driver behavior matter more than synthetic benchmarks alone.

The memory clock of 1188 MHz (19 Gbps effective) is notable because it directly feeds the 608.3 GB/s bandwidth figure. At 4K Ultra, that bandwidth is insufficient to maintain 60 FPS, as the 49 FPS average shows. At 4K Medium, the average rises to 76 FPS with a minimum of 64 FPS, suggesting that reducing texture quality and shadow complexity alleviates memory pressure enough to cross the 60 FPS threshold.

FAQ

*Q: What is the highest average FPS this combo achieves in Lockdown Protocol?*

A: The highest measured average is 225 FPS at 1920x1080 with Low settings. The next best is 165 FPS at 2560x1440 Low.

Q: Can this system maintain 60 FPS at 4K?

A: Yes, but only at Medium settings, where the average is 76 FPS with a minimum of 64 FPS. At High, the average drops to 66 FPS (no minimum reported), and at Ultra, it falls to 49 FPS, which is below 60.

Q: How does the RTX 3070 Ti compare to its nearest rivals in synthetic benchmarks?

A: The RTX 3070 Ti has an average benchmark score of 29945. The NVIDIA GeForce RTX 5070 Mobile scores 29928 (0.1% higher), the AMD Radeon RX 6800 scores 30095 (0.5% higher), and the AMD Radeon RX 6700 scores 30433 (1.6% higher). The RTX 2080 Ti scores 29783 (0.5% lower). All deltas are within 1.6%.

Q: What is the CPU’s percentile ranking among all tested CPUs?

A: The Ryzen 7 5700 is in the 78th percentile of all CPUs, with an average benchmark score of 25517. Its nearest rival, the Intel Xeon D-2752TER, scores 25530 (a delta of -0.1%).

Q: Does the 8 GB VRAM limit performance at 4K?

A: The data suggests it does at Ultra settings, where the average FPS is 49. At Medium and High, the averages are 76 and 66 FPS respectively, indicating that lower memory pressure from reduced texture detail allows the GPU to maintain playable frame rates.

Q: What is the FPS difference between Low and Ultra at 1080p?

A: At 1920x1080, Low averages 225 FPS while Ultra averages 105 FPS — a difference of 120 FPS, meaning Ultra delivers 46.7% of the Low setting’s frame rate.

How This Combo Ranks

Out of 3714 tested combos, the Ryzen 7 5700 + RTX 3070 Ti pairing ranks 1324th in Lockdown Protocol. This places it in the 64th percentile of all combinations tested, meaning roughly a third of tested systems outperform it, while two-thirds are slower. The rank is notable because both components individually sit in respectable percentiles — the CPU at 78 and the GPU at 75 — yet the combo ranking is lower than either would suggest.

The explanation lies in the balance of the pairing. At 1080p Low, where CPU limits dominate, the 225 FPS average is excellent, but many higher-end CPUs paired with the same or better GPUs would push even higher. At 4K Ultra, the GPU becomes the constraint, and systems with more powerful graphics cards (e.g., those with higher average scores than the RTX 3070 Ti’s nearest rivals) would decisively outperform this combo. The 1324 rank reflects that this is a mid-to-upper-tier combination that excels at high refresh rate 1080p and 1440p gaming but cedes ground at 4K Ultra.

The deltaPct values for the CPU’s nearest rivals show how close the Ryzen 7 5700 is to its competitors: the AMD Ryzen 7 5825U scores 25446 (0.3% higher), the AMD Ryzen 5 6600H scores 25550 (0.1% lower), and the AMD Ryzen 5 7640U scores 25485 (0.1% lower). These sub-1% differences mean that swapping in a rival CPU would change total system performance by less than a single percent, so the combo’s rank is primarily driven by the GPU’s capabilities.

Measured FPS Breakdown

At 1920x1080, the measured averages are: Low 225 FPS, Medium 160 FPS (min 136, max 184), High 139 FPS, and Ultra 105 FPS. The Medium setting provides a 160 FPS average with a respectable minimum of 136 FPS, ensuring smooth gameplay even in demanding scenes. The difference between Low and Medium is 65 FPS, while the difference between Medium and High is 21 FPS, and High to Ultra is 34 FPS.

At 2560x1440, the averages are: Low 165 FPS, Medium 117 FPS (min 99, max 135), High 102 FPS, and Ultra 77 FPS. The drop from 1080p to 1440p at each setting is roughly 27% for Low (225 to 165), 27% for Medium (160 to 117), 27% for High (139 to 102), and 27% for Ultra (105 to 77). This consistent scaling suggests the GPU is the limiting factor across all settings at this resolution, as the CPU has ample headroom.

At 3840x2160, the averages are: Low 106 FPS, Medium 76 FPS (min 64, max 87), High 66 FPS, and Ultra 49 FPS. The Low setting manages to exceed 100 FPS, which is impressive for 4K, but the Ultra setting falls below 50 FPS, indicating that this preset is not viable for competitive play. The Medium preset, with a minimum of 64 FPS, is the only 4K option that guarantees a 60 FPS floor.

The complete dataset shows a clear pattern: the gap between Low and Ultra widens as resolution increases. At 1080p, the gap is 120 FPS; at 1440p, it is 88 FPS; at 4K, it is 57 FPS. This narrowing gap at higher resolutions confirms that the RTX 3070 Ti’s compute resources are progressively more saturated, leaving less headroom for the extra work that Ultra settings demand.

Settings Recommendations

For 1920x1080, the Ultra preset at 105 FPS average is perfectly playable on high-refresh-rate monitors, but the Medium preset at 160 FPS (min 136) offers a better balance for competitive FPS play, where frame times matter more than visual fidelity. The Low preset’s 225 FPS is only useful for extreme competitive scenarios where every millisecond counts, but the visual trade-off is substantial.

At 2560x1440, the High preset at 102 FPS is the sweet spot. It provides a significant visual upgrade over Medium (117 FPS) while still delivering triple-digit frame rates. The Ultra preset at 77 FPS is acceptable for slower-paced play, but the 25 FPS difference from High makes it a poor trade for the marginal visual gains. Low at 165 FPS is overkill for most players, but it demonstrates the system’s capability for esports titles.

At 3840x2160, the Medium preset is the only sensible choice, with a 76 FPS average and 64 FPS minimum. High at 66 FPS is borderline, and Ultra at 49 FPS is not recommended for any gameplay scenario. The Low preset at 106 FPS is viable for those who prioritize frame rate over everything, but the visual downgrade from Medium is noticeable in a game like Lockdown Protocol where enemy visibility can depend on texture clarity.

The measured data indicates that the best overall experience is achieved at 1440p High, where the 102 FPS average combines with a minimum that is not reported but likely above 60 FPS given the trend. For 4K users, Medium is the only preset that maintains a 60 FPS floor, making it the recommended choice despite the compromise in visual quality.

CPU Role

The AMD Ryzen 7 5700 is a Zen 3 architecture processor on the AM4 socket, fabricated on a 7 nm TSMC process. It has 8 cores and 16 threads, with a base clock of 3.70 GHz and a boost clock of 4.60 GHz. The 65 W TDP indicates efficient power delivery, and the 16 MB of L3 cache (with 512 KB L2 per core and 64 KB L1 per core) provides ample fast-access storage for game data. Its memory support for DDR4 at dual-channel speeds yields 51.2 GB/s of bandwidth, which is modest by 2024 standards but sufficient for FPS titles that aren’t memory-bandwidth intensive.

In Lockdown Protocol, the CPU’s role is most evident at 1080p Low, where the 225 FPS average is likely near the processor’s practical limit. The Ryzen 7 5700’s single-thread score of 901 in 3DMark and 3296 in Passmark single-thread tests indicate strong per-core performance, which is critical for FPS games that rely on a few heavily-threaded tasks. The 16 threads help with background tasks and streaming, but the game’s core engine appears to scale well with the 8 physical cores.

The CPU’s benchmark scores show it is a capable part: Cinebench R23 multicore of 20655 and single-core of 2916, Geekbench multicore of 9959, and Passmark multithread of 24303. These figures place it in the 78th percentile of all CPUs, with an average benchmark score of 25517. Its nearest rivals are all within 0.3% of its score, meaning that in CPU-bound scenarios, this processor performs essentially identically to the AMD Ryzen 7 5825U, AMD Ryzen 5 6600H, and AMD Ryzen 5 7640U.

The 3DMark multi-thread scores reveal scaling: 2 threads score 1762, 4 threads score 3382, 8 threads score 5585, and 16 threads score 6617 (with max threads at 6617). The near-linear scaling from 8 to 16 threads (5585 to 6617, a 18.5% increase) indicates that the game can utilize more than 8 threads, but the diminishing returns suggest that 8 cores are the sweet spot. The Ryzen 7 5700’s 16 MB L3 cache is smaller than some competitors, but the game’s data set appears to fit within it, as evidenced by the consistent frame rates at 1080p.

At 4K, the CPU’s influence wanes. The identical 49 FPS at Ultra and 106 FPS at Low, compared to the GPU’s clear bottleneck at those settings, confirms that the Ryzen 7 5700 is not the limiting factor at high resolutions. The data shows that this CPU can comfortably feed the RTX 3070 Ti at 4K, with the GPU’s compute and memory subsystem being the sole constraint. For players targeting 1080p or 1440p with high refresh rates, the Ryzen 7 5700 provides ample headroom, and its 78th percentile ranking ensures it won’t hold back the RTX 3070 Ti in most scenarios.