Lockdown Protocol

The pairing of the AMD Ryzen 5 8400F with the NVIDIA GeForce GTX 1050 Ti in Lockdown Protocol yields a severely constrained experience, ranking 1619th out of 1637 tested combinations. The data shows a system where the CPU's modern Zen 4 architecture is almost entirely bottlenecked by a GPU that sits at the 30th percentile of all tested graphics cards. This combo is only viable for the lowest fidelity settings at 1080p, where it manages a playable average, but struggles to maintain pace at higher resolutions or quality presets.

FAQ

Q: What is the best average frame rate this combo can achieve in Lockdown Protocol?

A: The highest measured average FPS is 62.5, achieved at 1920x1080 resolution with the Low settings preset. This is the only configuration tested that breaks past the 60 FPS threshold.

Q: How does the GTX 1050 Ti compare to its closest rivals?

A: The GPU's average benchmark score is 5316, placing it virtually tied with the NVIDIA GeForce 930A (5317) and NVIDIA GeForce 940M (5297). It is 0.7% ahead of the AMD Radeon R7 240 (5280) and 0.8% behind the AMD Radeon R7 M445 (5361).

Q: Is the Ryzen 5 8400F a bottleneck for the GTX 1050 Ti?

A: Yes, benchmark results indicate a massive bottleneck. The CPU scores 20851 in Cinebench R23 multicore and ranks in the 82nd percentile of all CPUs, while the GPU's Passmark G3D score of 6340 places it in the 30th percentile. This disparity suggests the GPU is the limiting factor in every scenario.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the Low preset delivers an average of 62.5 FPS, which is 34.7 FPS higher than the Ultra preset's 27.8 FPS. The Ultra preset requires a 55.5% performance drop from Low to render its higher fidelity.

Q: How does the combo perform at 1440p compared to 1080p?

A: At 2560x1440, the maximum average FPS drops to 46.2 on Low settings, which is a 16.3 FPS decrease from the same settings at 1080p. The High preset at 1440p yields only 30.1 FPS, down from 38.5 FPS at 1080p.

Q: Can this system run Lockdown Protocol at 4K?

A: The data shows 4K (3840x2160) performance is below playable thresholds. The best result at this resolution is 28 FPS on Low settings, while the High and Medium presets hover around 20.9 and 20.6 FPS respectively, and Ultra drops to 12.6 FPS.

How This Combo Ranks

The combination's rank of 1619 out of 1637 tested combos places it in the bottom 1.1% of all systems tested for Lockdown Protocol. This is a decisive indicator that this hardware pairing is fundamentally mismatched for the game's demands. The Ryzen 5 8400F is a high-performing processor, with a Passmark multithread score of 24530 and a percentile ranking of 82, but its capabilities are rendered moot by the GTX 1050 Ti's low standing.

The GPU's percentile Vs All Gpus is 30, and its average benchmark score of 5316 puts it in direct competition with mobile and entry-level desktop parts like the GeForce 940M and Radeon R7 240. The data suggests that the CPU is operating with a significant amount of headroom, yet the GPU cannot translate that into frame rate. This results in a system that is technically functional but delivers a gaming experience more akin to a low-end laptop from several years ago than a modern desktop setup. The rank reflects the reality that almost every other combination of hardware tested, regardless of CPU strength, manages to outperform this pairing in this specific title.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is the definitive performance ceiling for this combo. Its 4 GB of GDDR5 memory on a 128-bit bus provides a bandwidth of 112.1 GB/s, which is a severe limitation for a modern FPS. The benchmark data shows the GPU's DirectX 12 score is 26, and its Vulkan score is 19851, indicating a weak API performance profile for current-generation titles. The core clocks are 1291 MHz base and 1392 MHz boost, which are low by modern standards and explain the sub-30 FPS averages at 4K.

The GPU's memory capacity and bandwidth appear to be the primary constraints. At 3840x2160, the average FPS does not meaningfully improve between Low (28 FPS) and Medium (20.6 FPS), suggesting that the 4 GB frame buffer is saturated even at lower settings. The texture rate of 66.82 GTexel/s and pixel rate of 44.54 GPixel/s are simply inadequate for the resolution and shader complexity required by Lockdown Protocol. The GPU's performance is the reason the combo ranks so poorly; the CPU is ready to feed frames, but the GPU can only process a fraction of them.

Settings Recommendations

Based on the measured FPS data, the only experience that approaches smoothness is the Low preset at 1920x1080, which yields an average of 62.5 FPS. This is the recommended configuration for any semblance of fluid gameplay. The Medium preset at 1080p drops the average to 42.5 FPS, a 32% reduction, which may be acceptable for some but is a significant compromise. High settings at 1080p offer 38.5 FPS, which is a playable but not ideal frame rate for a fast-paced FPS.

The data shows that the Ultra preset is not viable at any resolution. At 1080p, it averages 27.8 FPS, and this drops to 20.6 FPS at 1440p and 12.6 FPS at 4K. For users willing to accept lower visual quality for performance, the 1440p Low preset provides 46.2 FPS, which is smoother than 1080p High. However, for the most responsive experience, 1080p Low is the clear winner. The performance scaling from Low to Medium shows a significant cost, with a 20 FPS drop at 1080p, indicating that the GPU struggles with even modest increases in shader and texture detail.

Measured FPS Breakdown

The data reveals a clear performance hierarchy across resolutions and settings. At 1920x1080, the frame rates are as follows: Low yields 62.5 FPS, Medium yields 42.5 FPS, High yields 38.5 FPS, and Ultra yields 27.8 FPS. This shows a 34.7 FPS difference between the lowest and highest quality presets.

Moving up to 2560x1440, the averages drop significantly. The Low preset achieves 46.2 FPS, while Medium and High are much closer, at 31.1 and 30.1 FPS respectively. The Ultra preset at 1440p manages only 20.6 FPS. The gap between Low and Medium at this resolution is 15.1 FPS, showing that the GPU's resource limits are hit harder at higher pixel counts.

At 3840x2160, the system is overwhelmed. The Low preset is the only one to break 20 FPS, with an average of 28 FPS. Medium and High are nearly identical at 20.6 and 20.9 FPS, suggesting a hard bottleneck at that performance level. The Ultra preset plunges to 12.6 FPS. The data points to a consistent pattern: the GTX 1050 Ti's 4 GB VRAM and bandwidth are insufficient for 4K, and even the processor's strong performance cannot overcome this hardware limitation. The difference between 1080p Low and 1440p Low is 16.3 FPS, which is a substantial penalty for the resolution increase.