Lockdown Protocol

The AMD Ryzen 9 5900X and NVIDIA GeForce RTX 3080 Ti pairing delivers a high-refresh-rate experience in Lockdown Protocol, with measured performance that scales predictably across resolutions and settings. The data shows this combo ranking 430th out of 1,637 tested combinations, placing it comfortably in the top quarter of all systems. This is a configuration built for smooth competitive play, though the exact settings you choose will determine whether you prioritize frame rate or visual fidelity.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 9 5900X is a 12-core, 24-thread processor based on the Zen 3 architecture, built on a 7 nm process at TSMC. It runs at a base clock of 3.70 GHz and boosts up to 4.80 GHz, with 64 MB of L3 cache spread across the chip. Its benchmark profile shows strong multi-threaded capability—a Cinebench R23 multicore score of 33,150 and a Geekbench multicore score of 11,877—but what matters more for Lockdown Protocol is the single-core performance. The CPU’s 3DMark single-thread score of 941 and Cinebench R20 single-core score of 1,965 indicate it can feed the GPU efficiently in an FPS title that relies on rapid frame generation.

In Lockdown Protocol, the CPU’s role is evident in the frame rate scaling at lower resolutions. At 1080p Low, the combo reaches 257.4 FPS, which is a massive jump from the 4K Low result of 122.1 FPS. This suggests that at lower resolutions, the CPU is capable of pushing frames well beyond what the GPU can render at higher pixel counts. The processor’s 90th percentile ranking among all CPUs, with an average benchmark score of 39,453, puts it slightly above the AMD EPYC 4245P (0.2% faster) and just behind the AMD Ryzen 7 PRO 8845HS (0.7% slower). It also edges out the Intel Core i7-13700F by 0.9% and trails the Intel Core i7-13700 by 1%. This places the 5900X in a competitive tier where it won’t bottleneck the RTX 3080 Ti in most scenarios.

The 12-core count is more than sufficient for an FPS title; Lockdown Protocol likely doesn’t scale perfectly across all 24 threads, but the high boost clock ensures that the primary game threads get the speed they need. The CPU’s 105 W TDP and DDR4 memory support (dual-channel with 51.2 GB/s bandwidth) are typical for this generation, and the PCIe Gen 4 interface provides ample bandwidth for the GPU.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

*Q: What is the best resolution to run Lockdown Protocol on with this combo?*

A: The data shows 1440p High at 117.1 FPS and 1440p Ultra at 91.7 FPS, both of which are playable for competitive FPS. If you want the highest frame rate, 1080p Low hits 257.4 FPS, but 1440p Medium at 133.3 FPS offers a solid balance between visual quality and speed.

Q: How much performance do you lose going from 1080p to 4K?

A: At High settings, the drop is from 159.7 FPS at 1080p to 74.9 FPS at 4K, a reduction of about 53%. At Ultra settings, it falls from 119.2 FPS at 1080p to 59.2 FPS at 4K, which is a 50% decrease.

Q: Is the Ryzen 9 5900X a bottleneck for the RTX 3080 Ti?

A: Benchmark results indicate the CPU is not a significant bottleneck. At 1080p Low, the combo hits 257.4 FPS, which is well above what most displays can show, and the CPU’s 90th percentile ranking shows it can keep up with the GPU’s output.

Q: Should I use Ultra settings with this combo?

A: Only if you have a 60 Hz display. At 4K Ultra the combo averages 59.2 FPS, and at 1440p Ultra it hits 91.7 FPS. For higher refresh rates, Medium or High settings provide much more headroom.

Q: How does this combo rank compared to other tested systems?

A: It ranks 430th out of 1,637 combos tested, placing it in the top 26% of all configurations. This is a strong result for a modern high-end pairing.

Q: What is the GPU’s relative performance against its closest rivals?

A: The RTX 3080 Ti’s average benchmark score of 41,224 is 0.5% lower than the RTX 3090, 0.9% lower than the AMD Radeon Pro 5300, and 1.1% lower than the RTX 5070. It outperforms the Tesla M40 by 1.6%.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals a clear pattern: the performance hit from 1080p to 4K is substantial, indicating that the RTX 3080 Ti becomes the limiting factor at higher resolutions. At Low settings, the combo delivers 257.4 FPS at 1080p, dropping to 192.1 FPS at 1440p (a 25% reduction), and further to 122.1 FPS at 4K (a 53% reduction from 1080p). This scaling is expected, as the GPU must render four times the pixels at 4K compared to 1080p.

At High settings, the drop is from 159.7 FPS at 1080p to 117.1 FPS at 1440p (a 27% reduction), and then to 74.9 FPS at 4K (a 53% reduction from 1080p). The percentage loss is nearly identical across Low and High, which suggests that the GPU is the primary constraint—the CPU has enough headroom to maintain similar frame rates at lower resolutions, but the GPU’s rendering speed caps the output as pixel count increases.

The Ultra preset shows the same trend: 119.2 FPS at 1080p, 91.7 FPS at 1440p, and 59.2 FPS at 4K. The difference between 1440p and 4K at Ultra is a 35% drop, which is the largest percentage loss among all settings. This indicates that the Ultra preset loads the GPU heavily, and the RTX 3080 Ti’s 12 GB of GDDR6X memory and 912.4 GB/s bandwidth are strained at 4K. The GPU’s 83rd percentile ranking among all GPUs, with a PassMark G3D score of 26,896, confirms it is a high-end card, but not the absolute fastest, so 4K Ultra is only viable for 60 Hz gaming.

Settings Recommendations — which preset gives the best experience per the measured rows

For competitive play, the data strongly favors Medium or High settings at 1440p. At 1440p Medium, the combo averages 133.3 FPS, which is well above the 144 Hz refresh rate of most gaming monitors. Dropping to 1440p High yields 117.1 FPS, still excellent for fast-paced FPS gameplay. If you have a 240 Hz display, 1080p Medium at 186.1 FPS or 1080p High at 159.7 FPS are the best options, as they provide the smoothness needed for twitch shooting without sacrificing too much visual detail.

Ultra settings are not recommended for competitive play, as the frame rate drops to 119.2 FPS at 1080p and 91.7 FPS at 1440p. These numbers are playable, but they leave less headroom for frame time spikes. At 4K, the choices are more limited: High at 74.9 FPS is the only preset that maintains a playable frame rate above 60 FPS. Medium at 91.1 FPS is also viable if you want slightly better visuals, while Low at 122.1 FPS offers the smoothest 4K experience but with reduced graphics quality.

The sweet spot for most players is 1440p Medium, which balances the CPU’s 12-core throughput with the GPU’s 34.10 TFLOPS of FP32 compute power. This preset delivers nearly double the frame rate of 4K Ultra (133.3 vs 59.2 FPS) while still looking good on a 27-inch monitor. For those with 1080p displays, High settings are the best choice—159.7 FPS is fast enough for any competitive scenario, and the visual upgrade over Medium is noticeable.

How This Combo Ranks — use comboRankInGame vs other tested combos

The Ryzen 9 5900X and RTX 3080 Ti combination ranks 430th out of 1,637 tested combos in Lockdown Protocol, placing it in the top 26.3% of all systems. This is a strong showing for a pairing that uses a CPU from late 2020 and a GPU from mid-2021. The rank reflects the overall balance of the system: the CPU’s 90th percentile standing and the GPU’s 83rd percentile standing combine to produce a system that outperforms the majority of configurations.

The data shows this combo is not the absolute top-tier—there are 429 faster combos—but it is squarely in the high-end category. For context, the CPU’s nearest rivals include the Intel Core i7-13700F (0.9% faster) and the Intel Core i7-13700 (1% slower), while the GPU’s closest competitors are the RTX 3090 (0.5% faster) and the RTX 5070 (1.1% faster). This means the combo would rank slightly higher if paired with a 3090, but the 3080 Ti’s 12 GB memory and 384-bit bus provide enough bandwidth for Lockdown Protocol at all tested resolutions.

The rank also suggests that the system is not bottlenecked by either component. If the CPU were too weak, the combo would rank lower despite the powerful GPU; if the GPU were the weak link, the 1080p results would be lower. Instead, the measured FPS at 1080p Low (257.4 FPS) shows the system can push well beyond 240 Hz, indicating both parts work well together.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The complete measured FPS data for this combo across all resolutions and settings is as follows:

1920x1080:

• Low: 257.4 FPS
• Medium: 186.1 FPS
• High: 159.7 FPS
• Ultra: 119.2 FPS

2560x1440:

• Low: 192.1 FPS
• Medium: 133.3 FPS
• High: 117.1 FPS
• Ultra: 91.7 FPS

3840x2160:

• Low: 122.1 FPS
• Medium: 91.1 FPS
• High: 74.9 FPS
• Ultra: 59.2 FPS

At 1080p, the jump from Low to Medium is a 28% drop (257.4 to 186.1 FPS), while the drop from Medium to High is 14% (186.1 to 159.7 FPS), and from High to Ultra is 25% (159.7 to 119.2 FPS). This shows that the Ultra preset is significantly more demanding than High, likely due to increased shadow and texture detail. At 1440p, the pattern is similar: Medium to High is a 12% drop, while High to Ultra is a 22% drop. At 4K, the differences are more pronounced: Medium to High is an 18% drop, and High to Ultra is a 21% drop.

The data indicates that the RTX 3080 Ti’s 12 GB of GDDR6X memory is sufficient for all settings at 1080p and 1440p, but at 4K Ultra, the frame rate falls below 60 FPS, which may cause noticeable stuttering on fast-moving scenes. For the best experience, stick to 1440p Medium or High, where the combo delivers smooth, responsive gameplay without compromising visual quality.