Lockdown Protocol

The AMD Ryzen 5 5600G pairs with the NVIDIA GeForce RTX 5050 in Lockdown Protocol, a combo that produces a wide spread of frame rates depending on resolution and quality settings. The data shows a system capable of high refresh rates at 1080p, but one that becomes increasingly GPU-bound as resolution climbs, ultimately falling short of 60 FPS at 4K on the highest presets. This analysis examines the measured results to understand the balance between the six-core processor and the Blackwell-based graphics card.

CPU Role

The AMD Ryzen 5 5600G is a six-core, twelve-thread processor from the 5000 series, built on the Zen 3 architecture and codenamed Cezanne. It operates on a base clock of 3.90 GHz and boosts up to 4.40 GHz, with a 65W TDP. The CPU features a 16 MB L3 cache and 512 KB of L2 cache per core, using dual-channel DDR4 memory with 51.2 GB/s bandwidth. Its benchmark results show a Cinebench R23 multi-core score of 10551 and a single-core score of 1409, with a PassMark single-thread score of 3177 and a multi-thread score of 19717. The processor sits at the 74th percentile of all CPUs tested, with an average benchmark score of 21088, placing it within a fraction of a percent of rivals like the Intel Core i3-1220P and the AMD Ryzen 5 7530U.

In Lockdown Protocol, the CPU’s role is best understood by examining the frame rates at lower resolutions where the GPU is less taxed. At 1080p Low, the combo achieves 168 FPS, and at 1080p Medium it reaches 119 FPS, demonstrating that the processor can feed the GPU efficiently at high frame rates. The 1080p High preset yields 104 FPS, suggesting that the CPU maintains adequate headroom for the game’s logic and physics even as graphical load increases. The Ryzen 5 5600G’s twelve threads are sufficient to handle the game’s workload, as evidenced by the fact that frame rates scale predictably with resolution rather than collapsing due to CPU limits. The data does not show any scenario where the CPU becomes the primary bottleneck, as even the most demanding 4K Ultra setting produces 37 FPS, which is a GPU-driven result rather than a processor limitation.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600G and NVIDIA GeForce RTX 5050 achieves a rank of 1739 out of 2828 tested combos in Lockdown Protocol. This places the system in the upper-middle portion of the database, meaning it outperforms roughly 38% of all combinations tested for this game. The ranking reflects a balanced pairing where neither component is dramatically outclassed by the other, but the system is not at the top tier of performance.

When examining the GPU’s individual standing, the RTX 5050 ranks at the 66th percentile of all GPUs, with an average benchmark score of 21035. Its nearest rivals include the AMD Radeon RX 5600 XT, which scores 20713 and is 1.6% behind, and the AMD Radeon RX Vega M GL, which scores 21153 and is 0.6% ahead. The CPU’s 74th percentile ranking is slightly higher than the GPU’s, suggesting that the processor has a marginal edge in relative performance. However, the combo rank of 1739 indicates that the pairing works well together, as the system achieves playable frame rates across most tested configurations. The data shows that this combo is not a top-tier performer, but it is also far from the bottom, making it a reasonable mid-range option for Lockdown Protocol.

Resolution Scaling

The measured FPS data reveals a clear pattern of scaling as resolution increases from 1920x1080 to 2560x1440 and then to 3840x2160. At the Low preset, the average frame rate drops from 168 FPS at 1080p to 123 FPS at 1440p, a decrease of 45 FPS, and then to 79 FPS at 4K, a further drop of 44 FPS. This represents a 53% reduction from 1080p to 4K, indicating that the GPU is the limiting component as pixel count increases. The Medium preset shows a similar trend: 119 FPS at 1080p, 87 FPS at 1440p, and 56 FPS at 4K. The High preset follows the same pattern with 104 FPS, 76 FPS, and 49 FPS respectively. The Ultra preset scales from 78 FPS at 1080p to 57 FPS at 1440p and 37 FPS at 4K.

The scaling behavior demonstrates that the RTX 5050’s 8 GB of GDDR6 memory and 128-bit bus, which provides 320.0 GB/s of bandwidth, becomes the primary constraint at higher resolutions. The frame rate drops are roughly proportional to the increase in pixel count, which is characteristic of GPU-bound scenarios. At 1080p, the system delivers high refresh rates even on Ultra, but at 4K, only the Low preset maintains an average above 60 FPS. The data suggests that users targeting 4K will need to significantly reduce settings, while those at 1080p can enjoy smooth performance across all presets.

FAQ

Q: What is the highest average FPS achieved by this combo in Lockdown Protocol?

A: The highest average FPS is 168, achieved at 1920x1080 resolution with the Low preset.

Q: Is this combo capable of 60 FPS at 4K resolution?

A: At 4K, only the Low preset achieves above 60 FPS with an average of 79 FPS. The Medium preset averages 56 FPS, High averages 49 FPS, and Ultra averages 37 FPS, all below the 60 FPS threshold.

Q: How does the CPU compare to its nearest rivals in benchmark scores?

A: The AMD Ryzen 5 5600G has an average benchmark score of 21088, which is 0.1% higher than the Intel Core i3-1220P (21066) and 0.2% higher than the AMD Ryzen 5 7530U (21133). It is 0.1% behind the Intel Core Ultra 7 256V (21112).

Q: What is the GPU’s percentile ranking among all tested GPUs?

A: The NVIDIA GeForce RTX 5050 ranks at the 66th percentile of all GPUs, with an average benchmark score of 21035.

Q: What is the lowest average FPS recorded for this combo?

A: The lowest average FPS is 37, recorded at 3840x2160 resolution with the Ultra preset.

Q: Does the combo rank above or below the median in the database?

A: The combo ranks 1739 out of 2828 tested combos, which places it below the median (1414) but still in the upper 38% of all combinations.

GPU Role

The NVIDIA GeForce RTX 5050 is built on the Blackwell 2.0 architecture with the GB207 chip, manufactured on a 5 nm process by TSMC. It features 2560 shading units, 80 texture mapping units, and 32 raster output units, with 20 ray tracing cores and 80 tensor cores. The GPU operates at a base clock of 2317 MHz and a boost clock of 2572 MHz, with memory running at 2500 MHz (20 Gbps effective). The 8 GB of GDDR6 memory is connected via a 128-bit bus, providing 320.0 GB/s of bandwidth. The card delivers 13.17 TFLOPS of FP32 performance and has a 130W TDP, requiring a 300W suggested power supply.

In Lockdown Protocol, the GPU’s role is decisive at higher resolutions. The benchmark results show that the RTX 5050’s performance is adequate for 1080p gaming, where it achieves 168 FPS on Low and 78 FPS on Ultra. However, the 4K results reveal its limitations, as the average frame rate drops to 37 FPS on Ultra and only reaches 79 FPS on Low. The GPU’s 8 GB VRAM and 320.0 GB/s bandwidth are sufficient for 1080p and 1440p, but the 4K Ultra setting likely exceeds the memory capacity or bandwidth available, leading to the sharp performance decline. The GPU ranks at the 66th percentile, with its nearest rival being the AMD Radeon RX 5600 XT, which scores 1.6% lower, and the AMD Radeon RX Vega M GL, which scores 0.6% higher. This places the RTX 5050 in a competitive mid-range position, capable of handling modern titles at 1080p and 1440p but struggling at 4K.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and desired frame rate. For 1080p gaming, the Ultra preset provides an average of 78 FPS, which is smooth for most players, while the High preset offers 104 FPS for a better balance of quality and speed. The Medium preset at 1080p delivers 119 FPS, and the Low preset reaches 168 FPS, making it ideal for competitive play where maximum frame rates are prioritized. For 1440p, the High preset yields 76 FPS, which is playable, but the Medium preset at 87 FPS offers a more comfortable margin above 60 FPS. The Low preset at 1440p reaches 123 FPS, providing a high-refresh experience at the cost of visual fidelity. At 4K, the Low preset is the only option that maintains a playable average above 60 FPS, with 79 FPS. The Medium preset at 4K averages 56 FPS, which is borderline for smooth gameplay, while High and Ultra fall below 50 FPS.

The data indicates that for the best overall experience, users should prioritize the Medium preset at 1440p, as it offers a good balance of visual quality and performance with an average of 87 FPS and a minimum of 74 FPS. For those with 1080p displays, the High preset at 104 FPS provides a strong balance, while the Ultra preset at 78 FPS is suitable for users who prioritize image quality over frame rate. At 4K, the Low preset is the only viable option for consistent 60+ FPS gameplay, but users seeking higher quality should consider the Medium preset and accept an average of 56 FPS.

Measured FPS Breakdown

The measured FPS data is organized by resolution and settings, providing a complete picture of performance across configurations. At 1920x1080, the Low preset achieves an average of 168 FPS, the Medium preset averages 119 FPS with a minimum of 101 FPS and a maximum of 137 FPS, the High preset averages 104 FPS, and the Ultra preset averages 78 FPS. At 2560x1440, the Low preset averages 123 FPS, the Medium preset averages 87 FPS with a minimum of 74 FPS and a maximum of 100 FPS, the High preset averages 76 FPS, and the Ultra preset averages 57 FPS. At 3840x2160, the Low preset averages 79 FPS, the Medium preset averages 56 FPS with a minimum of 48 FPS and a maximum of 65 FPS, the High preset averages 49 FPS, and the Ultra preset averages 37 FPS.

The Medium preset is the only setting across all resolutions that includes minimum and maximum FPS data, providing insight into frame time consistency. At 1080p Medium, the minimum of 101 FPS and maximum of 137 FPS show a tight range, indicating stable performance. At 1440p Medium, the minimum drops to 74 FPS and the maximum rises to 100 FPS, showing a wider variance but still maintaining playable frame rates. At 4K Medium, the minimum falls to 48 FPS, which can result in noticeable stutter, while the maximum of 65 FPS is just above the 60 FPS threshold. This data suggests that the Medium preset is the most consistent option across resolutions, though at 4K it occasionally dips below 50 FPS. The overall breakdown confirms that the combo is best suited for 1080p and 1440p gaming, with 4K requiring significant settings reductions to maintain acceptable performance.