Lockdown Protocol

The pairing of the AMD Ryzen 5 5600 with the NVIDIA GeForce RTX 5070 Ti in Lockdown Protocol presents a classic high-refresh-rate setup. The CPU provides a solid six-core foundation with a 3.50 GHz base clock and 4.40 GHz boost clock, while the GPU brings 16 GB of GDDR7 memory on a 256-bit bus with 896.0 GB/s of bandwidth. Measured results show this combination is capable of delivering very high frame rates across most settings, with the primary bottleneck emerging only at the most demanding 4K Ultra preset.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600 is a six-core, twelve-thread processor built on the Zen 3 architecture. Its 3.50 GHz base clock and 4.40 GHz boost clock are what drive raw responsiveness in a fast-paced FPS like Lockdown Protocol. The processor's cache layout includes 64 KB of L1 per core, 512 KB of L2 per core, and a 32 MB shared L3 pool, which helps keep game data close at hand. In terms of general compute capability, the CPU scores 18,309 in Cinebench R23 multicore and 2,584 in single-core, placing it at the 79th percentile of all CPUs with an average benchmark score of 21,765.

The data indicates that this CPU is rarely the limiting factor at mainstream resolutions. At 1920x1080 with Low settings, the combo hits 258.7 FPS, which is likely beyond what the CPU can consistently feed at all times, but the average remains high. Moving to 2560x1440 Low yields 230.8 FPS, showing the CPU can sustain a very high input rate for competitive play. Even at 4K with Low settings, the combo produces 152.1 FPS, suggesting the Ryzen 5 5600 has enough single-thread muscle to avoid holding back the RTX 5070 Ti in most scenarios. The nearest rival comparison shows the CPU sits within a tight band of performance: it is 0.6% ahead of the Intel Xeon D-1746TER and 0.6% behind the AMD EPYC 9554P, with a 0.9% gap to the Intel Core i7-11700F. This means the 5600 is not an outlier in either direction; it is squarely in the expected performance tier for its class.

The processor's memory bandwidth of 51.2 GB/s over a dual-channel DDR4 interface is modest by modern standards, but the benchmark results suggest this is not a critical constraint in Lockdown Protocol. The practical takeaway is that the CPU can handle everything from Low to Ultra settings without dramatically changing its behavior; the frame rate swings across settings are primarily driven by the GPU's workload, not by a CPU ceiling.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5070 Ti is the dominant component in this pairing. Its 16 GB of GDDR7 memory on a 256-bit bus delivers 896.0 GB/s of bandwidth, which is more than sufficient for any texture load Lockdown Protocol can present. The GPU runs at a base clock of 2295 MHz with a boost clock of 2452 MHz, and its 8,960 shading units handle the rasterization workload. The card's 70 RT cores and 280 tensor cores are present but are not directly measured in the FPS data; what matters here is the raw fill rate and shader throughput.

The GPU's benchmark scores are impressive: a PassMark G3D score of 32,974 and a Geekbench OpenCL score of 231,226 place it at the 87th percentile of all GPUs. Its average benchmark score of 52,086 is a near-exact match for the NVIDIA GeForce RTX 4080, which scores 52,085 with a 0% deltaPct. This is a useful reference point because it indicates the 5070 Ti performs essentially identically to the prior generation's flagship in synthetic tests, though game-specific behavior can vary. The card is 2.5% ahead of the NVIDIA RTX A1000 and 2.5% behind the AMD Radeon Pro W6600M, confirming it sits in a well-established performance bracket.

In Lockdown Protocol, the GPU scaling is clear. At 3840x2160, the average frame rate drops from 152.1 FPS at Low to 105.4 FPS at Medium, then to 93.3 FPS at High, and finally to 72 FPS at Ultra. This 80 FPS swing between Low and Ultra shows that the GPU is the primary driver of performance at 4K. At 2560x1440, the spread is from 230.8 FPS at Low down to 109.1 FPS at Ultra, and at 1920x1080, it ranges from 258.7 FPS at Low to 147.3 FPS at Ultra. The consistent pattern is that the RTX 5070 Ti has ample headroom at lower settings, but the Ultra preset imposes a significant load that brings even this high-end card down to more modest frame rates.

FAQ

Q: Is the Ryzen 5 5600 a bottleneck for the RTX 5070 Ti in Lockdown Protocol?

A: Benchmark results do not show a significant CPU bottleneck at most settings. At 1920x1080 Low, the combo reaches 258.7 FPS, and at 2560x1440 Low it hits 230.8 FPS, which indicates the CPU can keep up with the GPU's output in these scenarios. The CPU's 3dmark single-thread score of 882 and Cinebench R23 single-core score of 2,584 suggest it has enough per-core performance for this game's demands.

Q: How does the RTX 5070 Ti compare to the RTX 4080 based on the data?

A: The two cards are statistically identical in average benchmark score. The RTX 5070 Ti scores 52,086 while the RTX 4080 scores 52,085, resulting in a 0% deltaPct. This means in synthetic tests, there is no measurable performance difference between them, though game-specific results can vary.

Q: What frame rate can I expect at 4K with High settings?

A: The measured average FPS at 3840x2160 with High settings is 93.3 FPS. This is above the 60 FPS threshold for smooth play, but it does not reach the high refresh rates that are possible at lower resolutions. For a competitive FPS, this may feel slightly less responsive than 144 Hz displays.

Q: Is 16 GB of VRAM necessary for Lockdown Protocol?

A: The data does not indicate VRAM capacity as a limiting factor. The RTX 5070 Ti has 16 GB of GDDR7 memory with 896.0 GB/s of bandwidth, and the frame rate scaling from Medium to Ultra at 4K (105.4 to 72 FPS) suggests the performance drop is due to GPU compute load rather than memory exhaustion.

Q: What is the best resolution for high-refresh-rate competitive play?

A: At 1920x1080 with Low settings, the combo produces 258.7 FPS, and at 2560x1440 Low it produces 230.8 FPS. Both are well above 144 Hz. The 2560x1440 Low setting offers a good balance of higher resolution with still very high frame rates, making it a strong choice for a competitive setup.

Q: How does the CPU's overall performance rank compared to other processors?

A: The Ryzen 5 5600 is at the 79th percentile of all CPUs with an average benchmark score of 21,765. It is 0.6% ahead of the Intel Xeon D-1746TER and 0.6% behind the AMD EPYC 9554P, placing it in a very competitive mid-range segment.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured data provides a complete picture of performance across three resolutions and four settings presets.

At 3840x2160, the combo starts at 152.1 FPS with Low settings. This is a high frame rate for 4K, but it drops significantly as settings increase. Medium settings yield 105.4 FPS, High settings yield 93.3 FPS, and Ultra settings drop to 72 FPS. The step from Low to Medium is a 46.7 FPS reduction, which is the largest single-step drop in this resolution. The subsequent steps are smaller: 12.1 FPS from Medium to High and 21.3 FPS from High to Ultra. The Ultra preset at 4K is the only configuration in the entire data set that falls below 100 FPS, indicating it places a heavy load on the GPU.

At 2560x1440, the frame rates are substantially higher. Low settings produce 230.8 FPS, which is a very high number for a 1440p display. Medium settings yield 166.2 FPS, High settings yield 142.8 FPS, and Ultra settings produce 109.1 FPS. The scaling from Low to Ultra here is a 121.7 FPS difference, showing that even at 1440p, the settings preset has a major impact on performance. The step from Low to Medium is 64.6 FPS, which is the largest drop in this resolution.

At 1920x1080, the performance is at its peak. Low settings hit 258.7 FPS, Medium settings reach 223.9 FPS, High settings produce 196 FPS, and Ultra settings still manage 147.3 FPS. The difference between Low and Ultra is 111.4 FPS, but even the lowest result of 147.3 FPS is above the 144 Hz threshold. This means that at 1080p, every setting preset provides a playable and smooth experience, with Low and Medium being the best choices for maximum refresh rate.

How This Combo Ranks — use comboRankInGame vs other tested combos

This specific combination of the AMD Ryzen 5 5600 and NVIDIA GeForce RTX 5070 Ti ranks 168th out of 1,637 tested combos in Lockdown Protocol. This places it in the top 10.3% of all configurations that have been benchmarked for this game. The rank is a holistic measure that takes into account the average performance across all settings and resolutions. Given that the RTX 5070 Ti is a high-end GPU, the rank is likely pulled down slightly by the mid-range CPU, but the overall position is still very strong.

The data shows that the combination is not at the very top of the leaderboard, which would be reserved for the latest flagship CPUs paired with the same GPU. However, it is well ahead of the median combo, which is expected given the GPU's 87th percentile ranking. The CPU's 79th percentile ranking is also above average, so both components are contributing positively to the overall score. The rank of 168 out of 1,637 means that approximately 1,469 other combos perform worse, and only 167 perform better. For a builder looking at this data, it indicates that this is a proven and capable setup for Lockdown Protocol, with the GPU being the star performer.

Settings Recommendations — which preset gives the best experience per the measured rows

The measured FPS data allows for clear recommendations based on the player's display and priorities.

For a 1920x1080 display, the Low preset delivers the highest average FPS at 258.7. This is ideal for competitive play where every frame matters. Medium settings at 223.9 FPS are also excellent, offering a slight visual improvement over Low while still maintaining very high frame rates. High settings at 196 FPS are the best choice for players who want a balance of visual quality and speed, as they remain well above the 144 Hz refresh rate. Ultra settings at 147.3 FPS are playable but provide no competitive advantage over High, so they are only recommended for players who prioritize visual fidelity over frame rate.

For a 2560x1440 display, the Low preset at 230.8 FPS is the top performer for competitive play. Medium settings at 166.2 FPS are still very good and represent a solid choice for most players. High settings at 142.8 FPS are just below the 144 Hz threshold, so players with 144 Hz monitors may notice a slight drop in smoothness. Ultra settings at 109.1 FPS are the least recommended for this resolution, as they sacrifice a significant amount of frame rate for marginal visual gains.

For a 3840x2160 display, the Low preset at 152.1 FPS is the clear winner for any kind of play. Medium settings at 105.4 FPS and High settings at 93.3 FPS are both above 60 FPS and are suitable for single-player or less competitive modes. Ultra settings at 72 FPS are the only configuration that approaches the lower limit of acceptable performance, and they are not recommended for a fast-paced shooter like Lockdown Protocol.

The best overall experience for most players would be the 2560x1440 Low or Medium preset, as it offers a high resolution with frame rates that are well above 144 Hz. For players with 1080p displays, the Medium preset at 223.9 FPS is the sweet spot for a high-refresh-rate experience. At 4K, the Low preset is the only configuration that fully leverages the high refresh rate capability of the GPU.