Barony
This combination delivers exceptional performance with an average of 266 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 87 | 122 | 140 | 190 |
| 1440p QHD | 167 | 229 | 267 | 363 |
| 1080p Full HD | 264 | 366 | 426 | 577 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 5600 + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
# Barony with AMD Ryzen 5 5600 + NVIDIA GeForce RTX 5070 Ti
The benchmark data for Barony with this AMD Ryzen 5 5600 and NVIDIA GeForce RTX 5070 Ti combination reveals a system that delivers exceptionally high frame rates across all tested resolutions, with the GPU clearly positioned as the primary scaling factor as resolution increases. The measured results show this combo ranking 173rd out of 1702 tested combinations, placing it in the top 10.2% of all configs tested for this roguelike title, a strong showing that reflects the high-end nature of the RTX 5070 Ti paired with a capable six-core Zen 3 processor.
Resolution Scaling
The frame rate progression from 1080p to 4K tells a clear story about where the bottleneck shifts as pixel count rises. At 1920x1080 with High settings, the system produces 365.5 FPS, which drops to 229.3 FPS at 2560x1440 — a 37.3% reduction. Moving further to 3840x2160 at High settings yields 122.3 FPS, another 46.7% drop from the 1440p figure. This steep decline between each resolution step indicates that the GPU is becoming increasingly stressed as resolution climbs, while the CPU has ample headroom at lower resolutions.
The Low settings row amplifies this pattern dramatically. At 1080p Low, the system reaches 576.8 FPS, but this falls to 363.2 FPS at 1440p (a 37.0% decrease) and then to 190.4 FPS at 4K (a 47.6% drop from 1440p). The consistent ~37% and ~47% reduction pattern across both High and Low settings strongly suggests the RTX 5070 Ti is the limiting component at 4K, while at 1080p the frame rates are so high that even a six-core processor can feed the GPU without becoming the primary constraint.
Interestingly, the Ultra settings row shows a slightly different scaling curve: 263.8 FPS at 1080p, 166.7 FPS at 1440p (a 36.8% drop), and 86.6 FPS at 4K (a 48.1% drop from 1440p). The relative consistency of these percentage drops across all four settings presets indicates that Barony's rendering workload scales predictably with resolution, and the RTX 5070 Ti's 16 GB of GDDR7 memory on a 256-bit bus with 896.0 GB/s bandwidth is sufficient to avoid any memory capacity or bandwidth cliff at 4K.
FAQ
Q: What is the highest average frame rate this combo achieves in Barony?
A: The highest measured average is 576.8 FPS at 1920x1080 with Low settings, demonstrating the system's ability to far exceed typical display refresh rates at the lowest preset.
Q: How does the combo rank among all tested configurations for this game?
A: This AMD Ryzen 5 5600 + NVIDIA GeForce RTX 5070 Ti combination ranks 173rd out of 1702 tested combos, placing it in the top 10.2% of all configurations benchmarked in Barony.
Q: What is the performance difference between 1080p and 4K at High settings?
A: The system delivers 365.5 FPS at 1920x1080 High and 122.3 FPS at 3840x2160 High, representing a 66.5% reduction in frame rate when moving from 1080p to 4K.
Q: Is the CPU or GPU more likely to be the performance limiter at 4K Ultra?
A: The 86.6 FPS result at 4K Ultra, combined with the consistent ~47-48% frame rate drops from 1440p to 4K across all settings, indicates the RTX 5070 Ti is the limiting component at 4K rather than the six-core Ryzen 5 5600.
Q: How much faster is Low settings compared to Ultra at 1440p?
A: At 2560x1440, Low settings produce 363.2 FPS while Ultra produces 166.7 FPS, meaning Low is roughly 2.18 times faster than Ultra at this resolution.
Q: What is the frame rate difference between Medium and High at 4K?
A: At 3840x2160, Medium settings yield 139.6 FPS while High yields 122.3 FPS, a difference of 17.3 FPS (approximately 14.1%) in favor of Medium.
CPU Role
The AMD Ryzen 5 5600 brings six cores and twelve threads based on the Zen 3 architecture, with a base clock of 3.50 GHz and a boost clock of 4.40 GHz. This processor, released in April 2022 with a launch MSRP of $199, sits in the 79th percentile for all CPUs according to aggregate benchmark data. Its Cinebench R23 multi-core score of 18309 and single-core score of 2584 indicate strong per-thread performance, which is critical for a roguelike like Barony where game logic and entity updates often rely on fewer threads.
The benchmark data shows that even at 1080p Ultra, where CPU load is highest relative to GPU load, the system maintains 263.8 FPS. This suggests the Ryzen 5 5600's 32 MB of shared L3 cache and 51.2 GB/s dual-channel DDR4 memory bandwidth are sufficient to keep the RTX 5070 Ti well-fed. The 3DMark results reinforce this picture: a single-thread score of 882 and a max-thread score of 5659 show balanced scaling across cores, which aligns with the frame rate consistency observed across resolution changes.
Notably, the CPU's nearest rivals in aggregate benchmark scores include the Intel Core i7-11700F at 21957 (0.9% higher) and the AMD EPYC 9534 at 21900 (0.6% higher), yet the Ryzen 5 5600's 21765 average score places it competitively with server-class silicon. In Barony specifically, the data shows no evidence of CPU bottlenecking even at the highest frame rates, as the 576.8 FPS Low-settings result at 1080p would likely expose any processor limitation.
Settings Recommendations
Examining the measured FPS rows, the Medium preset appears to offer the most balanced experience across resolutions. At 4K Medium, the system delivers 139.6 FPS, which is 14.1% higher than High settings (122.3 FPS) and 61.2% higher than Ultra (86.6 FPS). The jump from Medium to High costs 17.3 FPS at 4K, while the jump from High to Ultra costs an additional 35.7 FPS — a much steeper penalty for the visual gains Ultra presumably provides.
At 2560x1440, Medium delivers 266.5 FPS versus 229.3 FPS on High and 166.7 FPS on Ultra. The 1440p Medium result is 37.3% faster than Ultra and still well above any high-refresh-rate display's capabilities. For 1080p users, even Ultra at 263.8 FPS exceeds all but the most extreme monitors, so settings choice at this resolution becomes purely a visual preference rather than a performance necessity.
The data suggests that for 4K displays, Medium provides the best compromise between fidelity and frame rate, as the gap between Medium and High (17.3 FPS) is smaller than the gap between High and Ultra (35.7 FPS). At 1440p, High at 229.3 FPS offers a good balance, while at 1080p, the Ultra preset at 263.8 FPS remains fully playable without sacrifices.
How This Combo Ranks
With a combo rank of 173 out of 1702 tested configurations, this system places comfortably in the upper echelon of Barony performance. To contextualize this rank, the top 10.2% placement means the RTX 5070 Ti's 87th percentile standing among all GPUs is the primary driver of this strong result, while the Ryzen 5 5600's 79th percentile CPU ranking provides sufficient supporting performance.
The GPU's nearest rival, the NVIDIA GeForce RTX 4080, has an identical average benchmark score of 52085 (0.0% delta), suggesting that in Barony, this combo would perform nearly identically to an RTX 4080-based system with the same CPU. The AMD Radeon RX 7700S scores 52505 (0.8% higher), while the NVIDIA RTX A1000 scores 50826 (2.5% lower), placing the RTX 5070 Ti in a tight competitive cluster.
Given that this combo outranks approximately 90% of all tested configurations in Barony, the data indicates that users seeking maximum frame rates in this roguelike would need to look toward even higher-end GPUs or newer CPU generations to meaningfully improve upon these results. The 1702-combo pool likely includes many older or lower-tier configurations, and this system's 173rd placement reflects both the GPU's high-end positioning and the CPU's adequate performance for this title.
Measured FPS Breakdown
At 3840x2160, the system produces 86.6 FPS on Ultra, 122.3 FPS on High, 139.6 FPS on Medium, and 190.4 FPS on Low settings. The progression from Ultra to Low represents a 119.9% performance increase at 4K, demonstrating the significant impact of quality presets at this demanding resolution.
At 2560x1440, the measured results are 166.7 FPS on Ultra, 229.3 FPS on High, 266.5 FPS on Medium, and 363.2 FPS on Low. The 1440p Low result is 117.9% faster than 1440p Ultra, a slightly smaller relative gain than at 4K, suggesting the GPU has more headroom at lower resolutions.
At 1920x1080, the system achieves 263.8 FPS on Ultra, 365.5 FPS on High, 425.8 FPS on Medium, and 576.8 FPS on Low. The 1080p Low figure represents the highest measured frame rate in the entire dataset, and the 118.6% improvement from Ultra to Low at this resolution shows that even the fastest settings still allow the RTX 5070 Ti to operate well below its full potential.
The Ultra preset consistently shows the largest performance penalty across all resolutions, with 4K Ultra (86.6 FPS) being the only measured configuration below 100 FPS. Every other combination of resolution and settings exceeds 120 FPS, indicating that this system can comfortably drive high-refresh-rate displays in Barony under most conditions.
GPU Role
The NVIDIA GeForce RTX 5070 Ti, built on the Blackwell 2.0 architecture with the GB203 chip, provides the dominant performance contribution in this combo. Its 16 GB of GDDR7 memory on a 256-bit bus delivers 896.0 GB/s of bandwidth, which appears more than sufficient for Barony's rendering demands. The GPU's 70 RT cores and 280 tensor cores suggest modern rendering features are well-supported, though the measured FPS data does not isolate ray tracing or DLSS-specific workloads.
The GPU's 87th percentile standing among all GPUs, with an average benchmark score of 52086, places it near the top of the performance hierarchy. Its nearest rival, the RTX 4080, scores 52085 (essentially identical), while the RX 7700S scores 52505 (0.8% higher) and the RTX A1000 scores 50826 (2.5% lower). This tight clustering means the RTX 5070 Ti's performance in Barony is well understood relative to direct competitors.
The 43.94 TFLOPS FP32 compute throughput and 686.6 GTexel/s texture rate provide substantial raw processing power, which the resolution scaling data confirms: the GPU's performance degrades predictably as pixel count increases, without any sudden drops that would indicate memory bandwidth bottlenecks. The 4K Ultra result of 86.6 FPS, while the lowest in the dataset, still represents a highly playable experience for a roguelike, and the GPU's 300 W TDP with a suggested 700 W PSU indicates reasonable power requirements for the performance delivered.
Hardware Specifications
AMD Ryzen 5 5600
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600 + NVIDIA GeForce RTX 5070 Ti in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 190.4 |
| 3840x2160 | Medium | 139.6 |
| 3840x2160 | High | 122.3 |
| 3840x2160 | Ultra | 86.6 |
| 2560x1440 | Low | 363.2 |
| 2560x1440 | Medium | 266.5 |
| 2560x1440 | High | 229.3 |
| 2560x1440 | Ultra | 166.7 |
| 1920x1080 | Low | 576.8 |
| 1920x1080 | Medium | 425.8 |
| 1920x1080 | High | 365.5 |
| 1920x1080 | Ultra | 263.8 |
Barony with Ryzen 5 5600 + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RTX 5070 Ti + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 5600 + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.