Inside

The AMD Ryzen 7 9700F and Intel Arc B580 combination delivers a remarkably consistent experience in Inside, a 2016 Puzzle Platformer. The data shows that this pairing is capable of handling the game with significant headroom across all tested resolutions and settings, with performance scaling predictably as graphical load increases. The benchmark results indicate that the primary bottleneck shifts from the CPU at lower settings to the GPU at higher resolutions, a classic dynamic that this specific hardware configuration navigates smoothly.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 9700F is a desktop processor built on the Zen 5 architecture, codenamed Granite Ridge. It features 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. The CPU's 32 MB of shared L3 cache and 1 MB per-core L2 cache provide ample low-latency data access for game logic. While Inside is not a computationally demanding title by modern standards, the 9700F's specifications ensure that it is never the limiting factor in this pairing.

In the measured results, the CPU's influence is most apparent at 1080p with Low settings, where the average frame rate reaches 271 FPS. This high ceiling demonstrates that the processor can feed the GPU with enough draw calls and physics calculations to saturate even a low-resolution, low-detail workload. The 9700F's single-thread performance, indicated by its Passmark single-thread score of 4691, is particularly relevant for a puzzle platformer that relies on straightforward game logic rather than heavily multi-threaded simulations. The data shows that at 1080p Low, the system is likely CPU-bound, as the frame rate is substantially higher than at any other setting, and the GPU is not being taxed by complex shading or effects.

However, the processor's multi-threaded capability is not wasted. The 9700F's Passmark multithread score of 36470 and its data encryption score of 21488 suggest robust overall throughput, but the game itself does not require such resources. The benchmark results indicate that the CPU's 8 cores and 16 threads are more than sufficient to maintain stable frame pacing even when frame rates are high. In terms of its standing among other CPUs, the 9700F sits at the 94th percentile of all processors tested, with an average benchmark score of 69996. Its nearest rivals—the AMD Ryzen 9 7940HX (0.2% faster), Intel Core i7-14700KF (0.2% faster), AMD Ryzen 9 7950X (0.7% faster), and Intel Core i7-14700K (0.9% faster)—are all within a single percentage point, confirming that the 9700F is a top-tier performer that will not bottleneck a mid-range GPU in a light game like Inside.

GPU Role — VRAM, clocks, and how they relate to this game's results

The Intel Arc B580 is a discrete graphics card based on the Xe2-HPG architecture, part of the Battlemage generation. It operates at a consistent base and boost clock of 2670 MHz. The GPU is equipped with 12 GB of GDDR6 memory on a 192-bit bus, providing a memory bandwidth of 456.0 GB/s. For a game released in 2016, this amount of VRAM and bandwidth is far beyond what is required, ensuring that texture streaming and memory allocation never cause hitches or stutter.

The Arc B580's raw compute capabilities—13.67 TFLOPS of FP32 performance and 2560 shading units—allow it to handle Inside's graphical effects with ease. The GPU's pixel rate of 213.6 GPixel/s and texture rate of 427.2 GTexel/s are more than adequate for the dark, atmospheric art style of the game. The data shows that the GPU becomes the primary performance limiter as resolution and settings increase. At 4K with Ultra settings, the average frame rate drops to 58 FPS, a clear sign that the GPU is working near its capacity to render the highest detail level at that pixel count. Conversely, at 1080p Low, the 271 FPS average suggests the GPU is not fully utilized, as the CPU is likely governing the frame rate.

The Arc B580 occupies the 68th percentile of all GPUs tested, with an average benchmark score of 23021. Its nearest rivals are the AMD Radeon RX 580 2048SP (0.2% slower), NVIDIA GeForce RTX 2080 (0.6% slower), NVIDIA GeForce RTX 3080 (0.7% faster), and NVIDIA P106-100 (1.0% faster). This places the B580 in a performance class that is well-suited for 1080p and 1440p gaming, and even 4K in less demanding titles like Inside. The 12 GB VRAM buffer is particularly notable, as it provides a safety margin that ensures the game’s textures and geometry loads are never evicted from memory, even at 4K resolution.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

Examining the measured FPS across resolutions reveals a clear scaling pattern that identifies the limiting component at each stage. At 1080p with High settings, the average frame rate is 136 FPS. Moving to 1440p High, the frame rate drops to 98 FPS, a 28% reduction. At 4K High, it further drops to 61 FPS, a 38% reduction from 1440p. This progressive decline indicates that the GPU is the primary bottleneck as pixel count increases, since the CPU workload remains relatively constant regardless of resolution.

The Low settings row provides a more distinct picture of CPU versus GPU limits. At 1080p Low, the system achieves 271 FPS. At 1440p Low, it drops to 195 FPS, and at 4K Low, it falls to 123 FPS. The fact that frame rates still drop significantly with resolution even at Low settings confirms that the GPU is still a limiting factor, but the high absolute numbers suggest the CPU is not holding back performance. If the CPU were the bottleneck, the frame rates would remain flat across resolutions. The data shows that the 9700F can push well over 200 FPS in this game, so the GPU is the component that determines the final output.

The Medium settings row includes minimum and maximum FPS values, offering insight into frame consistency. At 1080p Medium, the average is 217 FPS, with a minimum of 185 FPS and a maximum of 250 FPS. At 1440p Medium, the average is 156 FPS, with a minimum of 133 FPS and a maximum of 180 FPS. At 4K Medium, the average is 98 FPS, with a minimum of 83 FPS and a maximum of 113 FPS. The consistent spread between minimum and maximum—roughly 30 FPS in each case—suggests that the frame pacing is stable and there are no sudden spikes or drops that would indicate a CPU stutter or GPU memory issue. The scaling from 1080p to 4K is smooth and proportional, aligning with the increasing number of pixels the GPU must process.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 7 9700F and Intel Arc B580 achieves a rank of 2139 out of 2887 tested combos in Inside. This places the pairing in the 74th percentile of all tested systems, indicating that it performs better than roughly three-quarters of the other configurations in the database. While this rank might seem modest given the individual components' high percentiles, it reflects the fact that Inside is a light game where even mid-range hardware can achieve high frame rates, so the differences between top-tier combos are minimal.

The combo rank of 2139 suggests that many other CPU and GPU pairings are capable of similar or better performance in this specific title, likely because the game does not heavily stress modern hardware. For instance, systems with more powerful GPUs or CPUs with higher single-thread performance might edge out this combo in the 1080p Low scenario, where the 9700F's frame rate ceiling is tested. However, the data shows that this combo is far from the bottom of the list, and it delivers a playable experience at all settings and resolutions, which is the primary takeaway for a puzzle platformer. The rank is a relative measure, and the absolute FPS numbers indicate that the combo is more than adequate for the game's demands.

FAQ

*Q: What is the maximum average frame rate achieved by this combo in Inside?*

A: The highest average frame rate measured is 271 FPS, which occurs at 1920x1080 resolution with Low settings.

*Q: Is the Intel Arc B580 capable of running Inside at 4K resolution?*

A: Yes. The data shows average frame rates of 61 FPS at 4K High, 98 FPS at 4K Medium, and 123 FPS at 4K Low, all of which are playable.

Q: How does the AMD Ryzen 7 9700F compare to its nearest rival, the Intel Core i7-14700KF?

A: The Ryzen 7 9700F has an average benchmark score of 69996, which is 0.2% lower than the Intel Core i7-14700KF's score of 70163, indicating a negligible performance difference.

Q: What is the average frame rate at 1440p with Ultra settings?

A: At 2560x1440 resolution with Ultra settings, the combo achieves an average frame rate of 93 FPS.

*Q: Does the GPU have enough VRAM for Inside at high resolutions?*

A: The Intel Arc B580 has 12 GB of GDDR6 memory with a bandwidth of 456.0 GB/s, which is more than sufficient for a 2016 puzzle platformer, even at 4K.

Q: What is the combo's ranking among all tested configurations?

A: The combo ranks 2139 out of 2887 total combinations tested for Inside.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The following table details the exact measured average frame rates for each resolution and settings preset. Minimum and maximum values are only recorded for the Medium preset.

• 3840x2160 (4K)
• High: 61 FPS average
• Low: 123 FPS average
• Medium: 98 FPS average (minimum 83 FPS, maximum 113 FPS)
• Ultra: 58 FPS average

• 2560x1440 (1440p)
• High: 98 FPS average
• Low: 195 FPS average
• Medium: 156 FPS average (minimum 133 FPS, maximum 180 FPS)
• Ultra: 93 FPS average

• 1920x1080 (1080p)
• High: 136 FPS average
• Low: 271 FPS average
• Medium: 217 FPS average (minimum 185 FPS, maximum 250 FPS)
• Ultra: 129 FPS average

The data shows a clear hierarchy: Ultra settings impose the heaviest load, with 4K Ultra being the only configuration that dips below 60 FPS (58 FPS average). High settings offer a balance, with 4K High still maintaining a 61 FPS average. Medium settings provide higher frame rates, and Low settings unlock the highest performance, with 1080p Low reaching 271 FPS. The minimum and maximum values for Medium settings show that the frame times are consistent, with the spread between min and max being roughly 30 FPS at each resolution.

Settings Recommendations — which preset gives the best experience per the measured rows

Analyzing the measured FPS rows, the optimal settings preset depends on the target resolution and desired frame rate. For a 60 FPS baseline, the data shows that 4K High (61 FPS) is the most demanding configuration that still meets this threshold. However, for a smoother experience, 4K Medium (98 FPS) offers a substantial frame rate increase with a modest visual quality reduction, making it the recommended choice for 4K displays.

At 1440p, the Ultra preset (93 FPS) is perfectly playable and provides the highest visual fidelity. The High preset (98 FPS) is nearly identical in performance, so choosing between them is a matter of preference for minor visual enhancements. The Medium preset (156 FPS) is an excellent option for users with high-refresh-rate monitors, as it delivers a frame rate well above 144 Hz. For 1080p, the Ultra preset (129 FPS) is the best choice for those prioritizing image quality, as it remains above 120 FPS. The High preset (136 FPS) is also viable, but the performance difference is negligible, so Ultra is recommended for the better graphics.

The Low preset, while offering the highest frame rates, is not recommended for Inside because the game's atmospheric lighting and shadow effects are integral to its presentation, and reducing them to Low would diminish the experience without providing a necessary performance boost—since even Ultra settings at 1080p yield 129 FPS. The data indicates that the Medium preset is the sweet spot for most users, as it provides a significant frame rate headroom over High and Ultra while maintaining a good level of visual quality. Specifically, 1080p Medium (217 FPS) and 1440p Medium (156 FPS) are both excellent choices for smooth gameplay, with 4K Medium (98 FPS) being the best balance for 4K displays.