Inside

The AMD Ryzen 7 5700X and NVIDIA GeForce RTX 3060 Ti combination delivers a highly capable experience in Inside, with the data showing a clear shift from CPU-bound performance at lower resolutions to a GPU-limited scenario at 4K. Across all tested settings, this pairing never drops below 74.6 frames per second, ensuring smooth gameplay throughout this puzzle platformer.

Resolution Scaling

The performance scaling from 1080p to 4K reveals a textbook transition where the limiting component changes based on resolution. At 1920x1080 with Low settings, the combo achieves 309.6 FPS, but this drops to 251.3 FPS at 2560x1440 and further to 153.7 FPS at 3840x2160. This represents a 50.3% reduction from 1080p to 4K at Low settings, indicating that the GPU becomes increasingly dominant as pixel count rises.

The pattern becomes more pronounced at higher settings. With Ultra settings, the frame rate moves from 166 FPS at 1080p to 117.4 FPS at 1440p, then falls to 74.6 FPS at 4K — a 55.1% drop from the lowest to highest resolution. This scaling behavior suggests that at 1080p, the CPU is doing substantial work to feed the GPU, while at 4K the RTX 3060 Ti’s rendering pipeline becomes the primary constraint. The gap between Low and Ultra settings widens with resolution: at 1080p the difference is 143.6 FPS, at 1440p it is 133.9 FPS, and at 4K it narrows to 79.1 FPS, confirming that higher resolutions compress the performance envelope and place greater strain on the graphics processor.

GPU Role

The RTX 3060 Ti brings 8 GB of GDDR6 memory on a 256-bit bus, delivering 448.0 GB/s of bandwidth. This memory configuration proves sufficient for Inside at all tested resolutions, as even the most demanding 4K Ultra configuration maintains a playable 74.6 FPS. The GPU’s boost clock of 1665 MHz and 4864 shading units provide the raw throughput needed to handle the game’s atmospheric lighting and shadow effects without compromising frame pacing.

The GPU’s benchmark standing places it in the 69th percentile among all graphics cards, with its average score of 25120 sitting close to rivals like the AMD Radeon RX 6700M, which scores 25180 with a delta of -0.2%. The texture rate of 253.1 GTexel/s and pixel rate of 133.2 GPixel/s indicate a card well-suited for the 2.5D side-scrolling perspective of Inside, where the rendering workload is modest compared to open-world titles. The 8 GB VRAM capacity is never a limiting factor in these measurements; the data shows no anomalous frame rate collapses that would indicate memory pressure, even at 4K Ultra where the GPU is clearly the bottleneck.

CPU Role

The Ryzen 7 5700X contributes 8 cores and 16 threads based on the Zen 3 architecture, with a base clock of 3.40 GHz and boost clock of 4.60 GHz. For Inside, which relies on consistent single-thread performance for game logic and physics, the CPU’s 3dmark single-thread score of 921 and Cinebench R23 single-core score of 3193 demonstrate adequate processing capability. The 32 MB of shared L3 cache helps maintain smooth frame delivery, particularly at 1080p where the CPU has more influence over achievable frame rates.

The processor’s overall benchmark average of 26214 places it in the 83rd percentile of all CPUs, with its nearest rival being the Intel Core i9-11900KF at 26196, a marginal 0.1% difference. This headroom means the CPU rarely becomes the primary limiting factor in Inside; the evidence is in the 1080p Low result of 309.6 FPS, which is high enough that the GPU still manages to keep pace. However, the data indicates that at 1080p with Ultra settings (166 FPS), the CPU’s role is more pronounced, as the frame rate does not scale linearly with GPU load — the 43.6% reduction from Low to Ultra at 1080p versus the 51.5% reduction at 4K suggests the CPU begins to cap performance in lower-resolution scenarios.

Measured FPS Breakdown

At 1920x1080, the RTX 3060 Ti and Ryzen 7 5700X combination produces its strongest results. Low settings yield 309.6 FPS, Medium delivers 277.9 FPS, High reaches 176.2 FPS, and Ultra settles at 166 FPS. The gap between Medium and High is substantial at 101.7 FPS, indicating that High settings introduce GPU-heavy effects that significantly increase rendering load.

Moving to 2560x1440, the frame rates remain highly playable: Low achieves 251.3 FPS, Medium hits 199.4 FPS, High maintains 121.5 FPS, and Ultra drops to 117.4 FPS. The scaling from High to Ultra is minimal at just 4.1 FPS, suggesting that Ultra adds negligible visual improvements over High while costing some performance.

At 3840x2160, the GPU becomes the clear bottleneck. Low settings still manage 153.7 FPS, but Medium falls to 123.3 FPS, High reaches 78.2 FPS, and Ultra bottoms out at 74.6 FPS. The transition from Medium to High at 4K represents a 45.1 FPS drop, the largest single-settings penalty across all resolutions, highlighting how the game’s higher preset tiers stress the GPU disproportionately as resolution increases.

How This Combo Ranks

This configuration ranks 814th out of 1671 tested combos for Inside, placing it in the middle of the database’s performance distribution. Given that the game is a puzzle platformer from 2016 with modest graphical demands, this mid-pack ranking reflects the hardware’s balance rather than any deficiency — the measured FPS data shows that even the lowest result (74.6 FPS at 4K Ultra) exceeds the threshold for smooth gameplay.

The ranking is more informative when considered alongside the CPU’s 83rd percentile and GPU’s 69th percentile standings. The fact that this combo lands near the median of tested systems suggests that Inside’s performance ceiling is reached relatively quickly with modern hardware; the RTX 3060 Ti’s 8 GB memory and the Ryzen 7 5700X’s 8-core design are more than sufficient for this title, so higher-ranked combos likely bring only marginal gains at 1080p where the CPU begins to matter more.

FAQ

Q: What is the highest average frame rate achievable with this hardware?

A: The maximum measured average is 309.6 FPS, achieved at 1920x1080 resolution with Low settings.

*Q: Can this combo handle 4K gaming in Inside?*

A: Yes, the lowest 4K result is 74.6 FPS at Ultra settings, with High settings reaching 78.2 FPS, so all 4K presets remain playable.

Q: How much performance is lost when moving from High to Ultra settings?

A: At 1080p the drop is 10.2 FPS (from 176.2 to 166), at 1440p it is 4.1 FPS (from 121.5 to 117.4), and at 4K it is 3.6 FPS (from 78.2 to 74.6), showing diminishing returns.

Q: Which component is the bottleneck at 1080p?

A: The data suggests the CPU plays a larger role at 1080p, as frame rates scale less from Low to Ultra compared to 4K, indicating the Ryzen 7 5700X caps performance before the GPU is fully utilized.

Q: Does the 8 GB VRAM cause any issues?

A: No, the measured FPS values show no signs of memory-related stuttering or frame drops, even at 4K Ultra where the game uses the highest texture quality.

Q: How does this combo compare to the GPU’s closest rival?

A: The RTX 3060 Ti scores 25120 in average benchmarks, while the AMD Radeon RX 6700M scores 25180, a difference of -0.2%, indicating near-identical raw performance.

Settings Recommendations

For the best balance of visual fidelity and frame rate, High settings at 2560x1440 provide the most compelling experience. The 121.5 FPS average at this configuration exceeds the refresh rate of most displays while maintaining the game’s atmospheric effects. At 3840x2160, Medium settings are the optimal choice: the 123.3 FPS result is significantly higher than High’s 78.2 FPS, and the visual difference between Medium and High in Inside is unlikely to justify the 45.1 FPS penalty.

For players prioritizing maximum smoothness over visuals, Low settings at 1080p deliver 309.6 FPS, which is excessive for most monitors but useful for high-refresh-rate displays. The Ultra preset is difficult to recommend at any resolution, as it provides only marginal gains over High while costing 10.2 FPS at 1080p, 4.1 FPS at 1440p, and 3.6 FPS at 4K. The data clearly indicates that High settings offer the most efficient use of the hardware’s capabilities, with the frame rate remaining above 166 FPS at 1080p and above 74 FPS at 4K — a fully playable range across the board.