Archeage
This combination provides smooth gameplay with an average of 65 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 21 | 33 | 46 | 48 |
| 1440p QHD | 39 | 53 | 76 | 88 |
| 1080p Full HD | 56 | 78 | 113 | 129 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 7 5700X + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
Archeage with the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 3060 Ti is a combination that scales predictably with resolution, but the data reveals a GPU-bound bottleneck that becomes severe at higher settings. At 1080p, the combo delivers playable frame rates across most presets, but the jump to 4K exposes the RTX 3060 Ti's limitations, particularly on Ultra settings where performance collapses.
Resolution Scaling
The measured FPS data shows a clear and consistent drop as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average frame rate falls from 128.9 FPS at 1080p to 88.1 FPS at 1440p, and then to 47.8 FPS at 4K. This represents a 63% reduction in performance from 1080p to 4K, indicating that the GPU is the primary limiting factor at higher resolutions. The scaling is less aggressive on High settings, where the average drops from 77.9 FPS at 1080p to 53.1 FPS at 1440p and 32.6 FPS at 4K — a 58% decrease overall.
The most dramatic scaling occurs on Ultra settings. At 1080p, the combo achieves 55.5 FPS, but this falls to 38.5 FPS at 1440p and a mere 21.4 FPS at 4K. The 61% drop from 1080p to 4K on Ultra is steeper than the drop on Low, which suggests that the higher preset's additional rendering demands push the RTX 3060 Ti well beyond its comfort zone. Medium settings show a similar pattern: 113.1 FPS at 1080p, 75.6 FPS at 1440p, and 46.0 FPS at 4K.
The data indicates that at 1080p, the CPU still has headroom, as the frame rates scale almost linearly with settings changes. However, at 4K, even the Low preset struggles to maintain 48 FPS, showing that the GPU's 8 GB of VRAM and its compute throughput are the definitive constraints. The 1440p results sit in a middle ground where High settings remain playable at 53.1 FPS, but Ultra is borderline at 38.5 FPS.
How This Combo Ranks
In the benchmark database, this specific CPU-GPU pairing ranks 1198 out of 1727 tested combos for Archeage. That places it in the lower third of all combinations, which is notable given the hardware's individual performance characteristics. The rank reflects the game's specific demands — Archeage is an MMORPG from 2014, and its engine appears to favor raw single-thread CPU performance and moderate GPU loads rather than the multi-core scaling that newer titles exhibit.
The RTX 3060 Ti sits at the 69th percentile among all GPUs, while the Ryzen 7 5700X ranks at the 83rd percentile among all CPUs. The combo's relatively low rank in this game suggests that the pairing is underperforming relative to what the individual components might suggest, likely due to Archeage's engine limitations and the GPU's VRAM capacity at higher resolutions. Compared to other tested combos, this setup is not in the top tier for this specific title, and the measured FPS data confirms that it struggles to maintain high frame rates at 4K.
The rank of 1198 out of 1727 means that roughly 70% of all tested combinations deliver better performance in Archeage. This is a significant gap, and it indicates that players seeking high refresh rates at 1440p or 4K would need either a stronger GPU or a more CPU-bound engine to see improvement.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with a GA104 chip, manufactured on Samsung's 8 nm process. It features 4864 shading units, 152 texture mapping units, and 80 raster output units, along with 38 ray tracing cores and 152 tensor cores. The GPU operates at a base clock of 1410 MHz and a boost clock of 1665 MHz, with memory running at 1750 MHz (14 Gbps effective) across a 256-bit bus. This configuration yields a memory bandwidth of 448.0 GB/s, supported by 8 GB of GDDR6 VRAM.
In Archeage, the GPU's role is decisive at higher resolutions. The 8 GB VRAM capacity becomes a limiting factor at 4K Ultra, where the average frame rate falls to 21.4 FPS. The data shows that lowering settings from Ultra to High at 4K provides a 52% performance uplift (21.4 to 32.6 FPS), while dropping to Medium yields 46.0 FPS and Low reaches 47.8 FPS. This suggests that the Ultra preset's additional memory usage and shader complexity overwhelm the GPU's available resources.
The RTX 3060 Ti's benchmark scores place it at the 69th percentile among all GPUs, with a Passmark G3D score of 20349 and a 3DMark Steel Nomad DX12 score of 2626. Its nearest rivals include the AMD Radeon RX 6700M (deltaPct -0.2), the AMD Radeon RX 6600 (deltaPct -0.5), and the AMD Radeon 890M (deltaPct -0.5). These comparisons show that the 3060 Ti is competitive with mid-range Radeon options, but none of these GPUs would dramatically change the 4K Ultra results in this game.
FAQ
Q: What is the best resolution for this combo in Archeage?
A: The data shows that 1920x1080 delivers the highest average frame rates across all settings, ranging from 55.5 FPS on Ultra to 128.9 FPS on Low. At 2560x1440, the combo remains playable on High (53.1 FPS) and Medium (75.6 FPS), but 4K Ultra is not viable at 21.4 FPS.
Q: How does the Ultra preset compare to High at 1440p?
A: At 2560x1440, the High preset averages 53.1 FPS, while Ultra drops to 38.5 FPS. The difference of 14.6 FPS represents a 27% penalty for the higher preset, which may not be worth the visual gains.
Q: Is the CPU or GPU the bottleneck at 1080p?
A: At 1080p Low, the combo reaches 128.9 FPS, which suggests the CPU (Ryzen 7 5700X with 8 cores and 16 threads) is capable of feeding the GPU. However, the frame rate drops to 55.5 FPS on Ultra at the same resolution, indicating the GPU becomes the limiting factor as settings increase.
Q: What is the average FPS at 4K on Medium settings?
A: The measured data shows an average of 46.0 FPS at 3840x2160 on Medium settings. This is playable but not smooth for fast-paced combat, and it is only 2.6 FPS higher than the Low preset's 47.8 FPS.
Q: How does this combo rank among all tested combinations?
A: It ranks 1198 out of 1727 combos for Archeage, placing it in the lower third of tested systems. The GPU's 69th percentile and CPU's 83rd percentile suggest the game's engine does not fully utilize the hardware's strengths.
Q: Does the 8 GB VRAM cause issues at 4K?
A: The data suggests yes. At 4K Ultra, the average FPS drops to 21.4, while lowering to High (32.6 FPS) and Medium (46.0 FPS) provides significant improvements. This pattern indicates VRAM capacity and bandwidth are constraining performance at the highest resolution.
Settings Recommendations
For the best measured experience, the data points to 1920x1080 with High settings as the optimal balance. This preset delivers 77.9 FPS, which is smooth for an MMORPG, and it avoids the steep performance penalties of Ultra (55.5 FPS) while offering better visuals than Medium (113.1 FPS, but with reduced detail). At 1080p, High settings provide a 40% frame rate improvement over Ultra, making it the clear choice for consistent gameplay.
At 2560x1440, the High preset at 53.1 FPS is the highest playable option, though players prioritizing frame rate over visuals could use Medium at 75.6 FPS. The Ultra preset at 1440p (38.5 FPS) is not recommended, as it dips below the 40 FPS threshold that many consider minimum for acceptable playability. For 4K, only the Low (47.8 FPS) and Medium (46.0 FPS) presets approach playable territory, but both are marginal and would benefit from a stronger GPU.
The measured data indicates that the Medium preset at 1440p offers the best compromise between resolution and performance, with 75.6 FPS versus 88.1 FPS on Low. This represents an 86% resolution increase (from 1080p to 1440p) while retaining most of the frame rate headroom.
CPU Role
The AMD Ryzen 7 5700X is a Zen 3 architecture processor on the Vermeer codename, manufactured on TSMC's 7 nm process with 4,150 million transistors on a 74 mm² die. It has 8 cores and 16 threads, with a base clock of 3.40 GHz and a boost clock of 4.60 GHz. The CPU's cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and a 32 MB shared L3 cache. It supports DDR4 memory in dual-channel configuration with 51.2 GB/s bandwidth, and connects via PCIe Gen 4 with 20 lanes.
In Archeage, the CPU's role is less prominent than the GPU, but the benchmark data shows its influence at lower resolutions. At 1080p Low, the combo reaches 128.9 FPS, which suggests the 5700X's single-thread performance (3DMark single-thread score of 921, Passmark single-thread score of 3385) is sufficient to drive high frame rates. The CPU's 3DMark 16-thread score of 6858 and Cinebench R23 multicore score of 22620 indicate strong multi-threaded capabilities, but Archeage's MMORPG engine seems to rely more on single-thread performance.
The 5700X ranks at the 83rd percentile among all CPUs, with an average benchmark score of 26214. Its nearest rivals include the Intel Core i9-11900KF (deltaPct 0.1), the AMD Ryzen 7 PRO 6850U (deltaPct -0.2), and the AMD Ryzen 5 7600X (deltaPct -0.2). These comparisons show the 5700X is competitive with high-end desktop and mobile processors, yet the combo's low rank in Archeage suggests that the game does not fully utilize the CPU's 16 threads.
Measured FPS Breakdown
At 1920x1080, the measured average FPS values are: Low 128.9, Medium 113.1, High 77.9, and Ultra 55.5. The difference between Low and Ultra is 73.4 FPS, showing that the GPU's load increases dramatically with settings. At 2560x1440, the averages are: Low 88.1, Medium 75.6, High 53.1, and Ultra 38.5. The drop from 1080p to 1440p on Low is 40.8 FPS (128.9 to 88.1), while on Ultra it is 17.0 FPS (55.5 to 38.5), indicating that the GPU is already struggling at 1080p Ultra.
At 3840x2160, the averages are: Low 47.8, Medium 46.0, High 32.6, and Ultra 21.4. The 4K results show a narrowing gap between Low and Medium (1.8 FPS), which suggests that the GPU is so heavily limited that even reducing settings has diminishing returns. The total range across all resolutions and settings spans from 21.4 FPS (4K Ultra) to 128.9 FPS (1080p Low), a 6x difference that highlights the importance of resolution and preset selection.
The data shows that the High preset at 1080p (77.9 FPS) delivers nearly identical performance to the Low preset at 1440p (88.1 FPS), but with better visuals. Similarly, the High preset at 1440p (53.1 FPS) is close to the Low preset at 4K (47.8 FPS). These cross-resolution comparisons suggest that players can trade resolution for visual quality while maintaining similar frame rates, but the CPU's headroom at 1080p Low (128.9 FPS) indicates that the 5700X is not the limiting factor in this game.
Hardware Specifications
AMD Ryzen 7 5700X
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700X + NVIDIA GeForce RTX 3060 Ti in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 47.8 |
| 3840x2160 | Medium | 46.0 |
| 3840x2160 | High | 32.6 |
| 3840x2160 | Ultra | 21.4 |
| 2560x1440 | Low | 88.1 |
| 2560x1440 | Medium | 75.6 |
| 2560x1440 | High | 53.1 |
| 2560x1440 | Ultra | 38.5 |
| 1920x1080 | Low | 128.9 |
| 1920x1080 | Medium | 113.1 |
| 1920x1080 | High | 77.9 |
| 1920x1080 | Ultra | 55.5 |
Archeage with Ryzen 7 5700X + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RTX 3060 Ti + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 7 5700X + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.