Hard West
This combination provides smooth gameplay with an average of 100 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 33 | 44 | 57 | 70 |
| 1440p QHD | 63 | 84 | 109 | 133 |
| 1080p Full HD | 99 | 133 | 173 | 207 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Hard West with AMD Ryzen 5 5500X3D + NVIDIA GeForce RTX 3070, In-Depth Analysis
The AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 3070 combination delivers a highly playable experience in Hard West, a turn-based tactics title from 2015, with performance that scales predictably across resolutions and settings. The measured data provides a clear picture of how this pairing handles the game’s demands, revealing that the GPU is the primary bottleneck at higher resolutions while the CPU remains largely headroom-rich.
Resolution Scaling
The FPS drop from 1080p to 4K is steep and consistent, pointing directly at the RTX 3070 as the limiting factor. At High settings, the average frame rate falls from 133 FPS at 1920x1080 to 84 FPS at 2560x1440, then plummets to 44 FPS at 3840x2160. That is a 66.9% reduction from 1080p to 4K, with the 1440p step already costing 36.8% of the 1080p performance. This pattern is typical of a GPU-bound scenario: the CPU, with its 6 cores and 12 threads, has ample capacity even at lower resolutions, but the pixel throughput required at 4K overwhelms the graphics card.
The scaling is even more dramatic at Ultra settings. The average FPS drops from 99 at 1080p to 63 at 1440p (a 36.4% decrease), and then to 33 at 4K (a 66.7% decrease from 1440p). This suggests that the Ultra preset introduces effects that are disproportionately expensive at higher pixel counts, likely related to shading or post-processing that scales with resolution. The gap between Low and Ultra at 4K is 37 FPS (70 vs 33), while at 1080p the same gap is 108 FPS (207 vs 99), reinforcing that the GPU’s compute resources are stretched thin at 4K regardless of settings.
Interestingly, the Medium preset shows the most consistent scaling behavior, with a 60 FPS drop from 1080p (173) to 1440p (109), and a further 52 FPS drop to 4K (57). The min FPS values for Medium also show a proportional decline: 147 at 1080p, 93 at 1440p, and 49 at 4K. This consistency suggests that Medium is the most balanced preset in terms of how it distributes workload across the GPU’s architecture, avoiding the sudden cliff seen at Ultra. The data implies that for 4K gaming, the RTX 3070’s 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are sufficient to avoid stuttering, but the raw shader throughput—20.31 TFLOPS—is simply not enough to maintain high frame rates at that resolution.
How This Combo Ranks
In the benchmark database, this specific CPU-GPU combination ranks 1250 out of 2949 tested combos for Hard West. This places it in the 57.6th percentile of all combinations, meaning it outperforms a slight majority of systems but is far from the top tier. The ranking reflects a mid-to-high-end pairing that excels at 1080p and 1440p but struggles to stand out at 4K. Given that the game is from 2015, the fact that this 2025-era CPU and 2020-era GPU combination only reaches the 57th percentile suggests that Hard West is either highly optimized for specific hardware or that the benchmark pool includes many configurations with newer, more powerful GPUs.
Looking at the individual components, the CPU’s average benchmark score of 37018 places it at the 85th percentile of all CPUs, with nearest rivals including the AMD Ryzen 5 5600F (36945, +0.2% delta), the AMD Ryzen AI 7 PRO 450 (37093, -0.2%), and the Intel Core Ultra 5 225 (36938, +0.2%). This tight clustering indicates that the 5500X3D is a solid mid-range performer, but not a standout. The GPU, with an average benchmark score of 17208, sits at the 61st percentile, with the AMD Radeon RX 7600 XT (17083, +0.7%) and NVIDIA GeForce GTX 690 (17037, +1%) as close rivals. The GPU’s lower percentile relative to the CPU suggests that the RTX 3070 is the weaker link in this pairing, which aligns with the resolution scaling data.
The combo rank of 1250 out of 2949 is interesting because it implies that many other combinations achieve better results in Hard West. This could be due to the game’s turn-based nature, which may favor higher single-thread performance over raw multi-core throughput. The CPU’s PassMark single-thread score of 2941 is respectable, but not exceptional, while its multithread score of 20363 is strong. However, the GPU’s DirectX 11 score of 182 and DirectX 12 score of 85 are relatively low, suggesting that the RTX 3070’s driver optimization for this older title may not be ideal.
Settings Recommendations
Based on the measured FPS data, the Medium preset offers the best balance between visual quality and performance across all resolutions. At 1080p, Medium delivers 173 FPS average with a minimum of 147 FPS, which is far above any refresh rate typically used. At 1440p, Medium still provides 109 FPS average with a minimum of 93 FPS, ensuring smooth gameplay even during intense turn-based combat scenes with multiple units on screen. At 4K, Medium drops to 57 FPS average with a minimum of 49 FPS, which is playable but may feel slightly less fluid on high-refresh-rate displays.
High settings are a viable alternative for users with 1080p or 1440p monitors. At 1080p, High yields 133 FPS average, which is still excellent, while at 1440p it drops to 84 FPS—a noticeable but acceptable decrease. However, at 4K, High plummets to 44 FPS, which is borderline for a turn-based game where reaction time is less critical. Ultra settings are only recommended for 1080p displays, where 99 FPS average is still smooth, but the 63 FPS at 1440p and 33 FPS at 4K make this preset impractical for higher resolutions.
Low settings are unnecessary for this hardware unless targeting maximum frame rates on a 240 Hz or higher monitor. At 1080p, Low achieves 207 FPS average, and at 1440p it still reaches 133 FPS. However, the visual sacrifice is significant, and given the game’s turn-based nature, the extra frames beyond 100 FPS provide minimal tangible benefit. The data suggests that Medium is the sweet spot, providing a 64.7% FPS increase over Ultra at 4K (57 vs 33) while maintaining a minimum FPS above 48, which is critical for avoiding perceived stutter.
Measured FPS Breakdown
The complete measured FPS dataset reveals a clear hierarchy across resolutions and settings. At 1920x1080, the average FPS ranges from 207 at Low settings to 99 at Ultra, with Medium at 173 (min 147, max 198) and High at 133. This shows a 108 FPS difference between the lowest and highest presets, indicating that the GPU is not the limiting factor at this resolution; even Ultra settings leave significant headroom. The min FPS at Medium (147) is higher than the average FPS at Ultra (99), suggesting that Ultra introduces effects that cause occasional frame drops, possibly due to increased draw calls or shadow complexity.
Moving to 2560x1440, the average FPS drops to 133 at Low, 109 at Medium (min 93, max 126), 84 at High, and 63 at Ultra. The difference between Low and Ultra is 70 FPS, which is a smaller absolute gap than at 1080p but proportionally similar. The min FPS at Medium (93) is still above 60, ensuring smooth gameplay, but the Ultra preset’s average of 63 FPS is close to the edge of what might be considered ideal for a 60 Hz display. At 3840x2160, the average FPS falls to 70 at Low, 57 at Medium (min 49, max 66), 44 at High, and 33 at Ultra. The min FPS at Medium (49) is below 60, indicating that even the recommended preset will experience occasional drops below the 60 FPS threshold at 4K.
The data shows a consistent pattern: each step up in resolution reduces FPS by roughly 30-40%, regardless of settings. For example, High settings drop from 133 to 84 to 44 across resolutions, while Low drops from 207 to 133 to 70. This uniformity suggests that the RTX 3070’s fill rate and memory bandwidth are the primary constraints, rather than any specific setting. The 8 GB VRAM is not exceeded at any point, as evidenced by the lack of catastrophic frame drops, but the 448.0 GB/s bandwidth is likely saturated at 4K with higher presets.
GPU Role
The NVIDIA GeForce RTX 3070 plays the dominant role in this game’s performance, as evidenced by the dramatic FPS scaling with resolution. Its 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, which is sufficient for Hard West’s textures and geometry even at 4K, but the 20.31 TFLOPS of FP32 compute is the limiting factor. The GPU’s boost clock of 1725 MHz and base clock of 1500 MHz are moderate for the Ampere architecture, and the 5888 shading units are tasked with rendering the game’s turn-based battlefields.
The GPU’s benchmark scores provide context: its PassMark G3D score of 22214 and Geekbench OpenCL score of 112821 indicate strong compute capability, but its DirectX 11 score of 182 and DirectX 12 score of 85 are relatively low, suggesting that Hard West may not fully utilize the RTX 3070’s modern feature set. The game’s 2015 release date predates DirectX 12 Ultimate, so it likely relies on older rendering paths that do not take advantage of the GPU’s RT cores (46) or tensor cores (184). This explains why the GPU’s performance in this title is more dependent on raw pixel throughput than on specialized hardware.
The nearest GPU rivals, including the AMD Radeon RX 7600 XT (17083, +0.7%) and NVIDIA GeForce GTX 690 (17037, +1%), are all within 1.5% of the RTX 3070’s average benchmark score, yet the measured FPS in Hard West shows that the RTX 3070 delivers playable frame rates at 1440p but struggles at 4K. This suggests that the game’s engine is more sensitive to memory bandwidth than to compute throughput, as the GTX 690’s dual-GPU configuration would theoretically provide more bandwidth but is not reflected in the benchmark scores. The RTX 3070’s 8 GB VRAM is not a bottleneck, as the game’s textures are likely modest by modern standards, but the 256-bit bus width is the architectural constraint that limits 4K performance.
CPU Role
The AMD Ryzen 5 5500X3D is clearly not the bottleneck in Hard West, as its performance is sufficient to feed the GPU at all resolutions. With 6 cores and 12 threads based on the Zen 3 architecture (Vermeer), the CPU has a base clock of 3.00 GHz and a boost clock of 4.00 GHz. Its 96 MB of shared L3 cache is a significant asset for game logic, which often involves large data structures for unit positions and AI decisions. The CPU’s PassMark multithread score of 20363 and single-thread score of 2941 place it at the 85th percentile of all CPUs, indicating strong overall capability.
The CPU’s nearest rivals include the AMD Ryzen 5 5600F (36945, +0.2%) and Intel Core Ultra 5 225 (36938, +0.2%), all within 0.3% of each other. This clustering suggests that the 5500X3D is a well-balanced mid-range processor, but its performance in Hard West is unlikely to differ significantly from these alternatives. The game’s turn-based nature means that CPU load is bursty—during AI turns, the CPU must process many unit actions simultaneously, but between turns, the load drops dramatically. The 12 threads and large L3 cache help during these bursts, but the 3.00 GHz base clock is relatively modest, so the CPU may occasionally be the limiting factor during complex AI calculations in large battles.
However, the measured FPS data shows no signs of CPU limitation. At 1080p Low, the 207 FPS average indicates that the CPU can generate frames faster than the GPU can render them, even at the lowest settings. The fact that the FPS drops uniformly across settings at each resolution suggests that the GPU is always the bottleneck, as a CPU bottleneck would show less variation between Low and Ultra. The CPU’s memory bandwidth of 51.2 GB/s is also sufficient for the game’s data requirements, and the DDR4 memory support is adequate for this workload. The conclusion is that the 5500X3D provides more than enough processing power for Hard West, leaving the RTX 3070 as the sole performance limiter.
FAQ
*Q: What is the best resolution to play Hard West with this CPU-GPU combo?*
A: Based on the measured data, 2560x1440 with Medium settings provides the best balance, offering 109 FPS average with a minimum of 93 FPS. At 1080p, the combo achieves 173 FPS at Medium, which is overkill for most displays, while 4K at Medium drops to 57 FPS average, which is playable but not ideal.
Q: How does the RTX 3070 compare to its nearest rivals in terms of benchmark scores?
A: The RTX 3070 has an average benchmark score of 17208, which is 0.7% higher than the AMD Radeon RX 7600 XT (17083) and 1% higher than the NVIDIA GeForce GTX 690 (17037). It is 1.5% lower than the NVIDIA Tesla K40c (17468), but these differences are minor and unlikely to affect Hard West performance significantly.
Q: Is the Ryzen 5 5500X3D a bottleneck for the RTX 3070 in this game?
A: No, the CPU is not a bottleneck. The FPS scaling from 1080p to 4K shows a consistent drop that is characteristic of GPU limitation. At 1080p Low, the combo achieves 207 FPS, indicating the CPU can push frames far beyond what the GPU can render.
Q: What is the minimum FPS at 4K Ultra settings?
A: The measured data does not provide a minimum FPS for 4K Ultra, but the average FPS is 33. For comparison, the Medium preset at 4K has a minimum FPS of 49, which is higher than the Ultra average, suggesting that Ultra may experience drops below 30 FPS.
*Q: How does this combo rank among all tested combinations for Hard West?*
A: This combo ranks 1250 out of 2949 total combinations, placing it in the 57.6th percentile. This indicates it performs better than a majority of systems but is not a top-tier configuration for this specific game.
*Q: Does the GPU’s 8 GB VRAM limit performance in Hard West?*
A: No, the data does not indicate VRAM limitation. The FPS drops are consistent across settings, and there are no signs of texture thrashing or stuttering that would occur if VRAM were exceeded. The 8 GB capacity is sufficient for this 2015 title.
Hardware Specifications
AMD Ryzen 5 5500X3D
NVIDIA GeForce RTX 3070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5500X3D + NVIDIA GeForce RTX 3070 in Hard West
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 70.0 |
| 3840x2160 | Medium | 57.0 |
| 3840x2160 | High | 44.0 |
| 3840x2160 | Ultra | 33.0 |
| 2560x1440 | Low | 133.0 |
| 2560x1440 | Medium | 109.0 |
| 2560x1440 | High | 84.0 |
| 2560x1440 | Ultra | 63.0 |
| 1920x1080 | Low | 207.0 |
| 1920x1080 | Medium | 173.0 |
| 1920x1080 | High | 133.0 |
| 1920x1080 | Ultra | 99.0 |
Hard West with Ryzen 5 5500X3D + Other GPUs
See how Hard West performs with the same CPU but different graphics cards.
Hard West with RTX 3070 + Other CPUs
See how Hard West performs with the same GPU but different processors.
Other Games with Ryzen 5 5500X3D + RTX 3070
Explore FPS benchmarks for other games using this same hardware combination.