Greedfall
This combination provides smooth gameplay with an average of 111 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 63 | 70 | 89 |
| 1440p QHD | 68 | 106 | 117 | 149 |
| 1080p Full HD | 98 | 153 | 168 | 214 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Greedfall with AMD Ryzen 5 5600G + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS data for Greedfall with the AMD Ryzen 5 5600G and NVIDIA GeForce RTX 3070 Ti shows a clear and predictable scaling pattern as resolution increases. At 1080p with High settings, the combo produces 153 FPS. Moving to 1440p at the same High preset drops that figure to 106 FPS, a reduction of roughly 31%. Stepping up to 4K at High further reduces the average to 63 FPS, which is approximately 41% lower than the 1440p result and about 59% below the 1080p figure.
This scaling behavior indicates that the system transitions from a CPU-bound state at lower resolutions to a GPU-bound state at higher ones. At 1080p, the processor's 6 cores and 12 threads are able to feed frames quickly enough that the graphics card becomes the primary constraint only at higher pixel counts. The fact that the 1080p High result (153 FPS) is more than double the 4K High result (63 FPS) shows the substantial workload increase that 4K renders on the RTX 3070 Ti.
Looking at the Low preset across resolutions tells a similar story. At 1080p Low, the combo achieves 214 FPS, which drops to 149 FPS at 1440p and 89 FPS at 4K. The percentage drop from 1080p to 1440p is about 30%, and from 1440p to 4K it is approximately 40%. These consistent ratios across different presets suggest that the scaling is primarily driven by pixel count rather than by any specific setting within the presets.
The Medium preset shows the only measured minimum and maximum FPS values in the dataset. At 1080p Medium, the average is 168 FPS with a minimum of 143 FPS and a maximum of 194 FPS. At 1440p Medium, the average falls to 117 FPS with a 99 FPS minimum and 134 FPS maximum. At 4K Medium, the average is 70 FPS with a minimum of 59 FPS and a maximum of 80 FPS. These ranges indicate that even at the lowest measured point (59 FPS at 4K Medium), the experience remains playable, though it approaches the threshold where frame pacing could become noticeable.
Ultra settings produce the most demanding workload. At 1080p Ultra, the average is 98 FPS, which is still comfortably above standard display refresh rates. At 1440p Ultra, the average drops to 68 FPS, and at 4K Ultra, it falls to 40 FPS. The 4K Ultra result is the only measured average below 60 FPS across the entire dataset, suggesting that this combination of resolution and preset pushes the hardware to its limits.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture with the Cezanne codename. It operates with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. The CPU has a 16 MB L3 cache, with 64 KB L1 and 512 KB L2 per core. This configuration provides solid single-threaded and multi-threaded performance for a 2021 desktop processor.
In synthetic benchmarks, the 5600G scores 10551 in Cinebench R23 multi-core and 1409 in single-core. Its Geekbench results are 8428 multi-core and 1801 single-core. The 3DMark tests show a single-thread score of 872 and a 16-thread score of 5451, with the max-thread score nearly identical at 5455. These numbers indicate that the processor scales well with additional threads, but the gains plateau after 8 threads, as shown by the 8-thread score of 4694 compared to the 16-thread score of 5451.
For Greedfall, an Action RPG, the CPU's role is primarily in maintaining consistent frame pacing and handling game logic. The 1080p Low result of 214 FPS demonstrates that the CPU is capable of feeding a very high frame rate to the GPU when the graphical workload is minimal. The drop to 153 FPS at 1080p High suggests that even at this resolution, the GPU is becoming the limiting factor, as the additional graphical settings reduce the frame rate by 28% despite the CPU having headroom.
The processor's nearest rivals in synthetic benchmarks are closely matched. The Intel Core i3-1220P scores 21066 with a delta of 0.1%, the Intel Core Ultra 7 256V scores 21112 with a delta of -0.1%, and the AMD Ryzen 5 7530U scores 21133 with a delta of -0.2%. The AMD Ryzen 5 5600G's average benchmark score of 21088 places it in the 74th percentile of all CPUs tested. This positioning suggests that while the processor is not a top-tier performer, it provides sufficient compute power for gaming workloads where frame rates are often GPU-limited.
The 5600G's TDP of 65 W and the fact that it includes integrated Radeon Vega 7 graphics are notable characteristics, though the integrated GPU is not used in this benchmark configuration. The processor's dual-channel DDR4 memory support with a bandwidth of 51.2 GB/s is typical for the platform and does not appear to bottleneck the RTX 3070 Ti in Greedfall based on the measured results.
Settings Recommendations — which preset gives the best experience per the measured rows
Examining the measured FPS data across all three resolutions, the Medium preset consistently offers the best balance between visual quality and performance. At 1080p Medium, the combo achieves an average of 168 FPS with a minimum of 143 FPS, which provides a smooth experience on any standard display. The jump from Medium to High at 1080p costs 15 FPS (168 to 153), a reduction of about 9%, while the jump from High to Ultra costs an additional 55 FPS (153 to 98), a much steeper 36% reduction.
At 1440p, the Medium preset delivers 117 FPS average with a 99 FPS minimum. This is above the 60 FPS threshold and provides enough headroom for most gaming scenarios. The High preset at 1440p reduces the average to 106 FPS, which is still very playable, but the Ultra preset drops to 68 FPS, which begins to approach the lower bounds of what most players would consider smooth. The Medium preset at 1440p offers the safest combination of visual fidelity and performance, with the minimum FPS staying just below 100.
For 4K gaming, the choices become more constrained. The Medium preset produces 70 FPS average with a 59 FPS minimum, which is the only 4K preset that maintains an average above 60 FPS. The High preset at 4K averages 63 FPS, which is technically playable but leaves little margin for demanding scenes. The Ultra preset at 4K averages 40 FPS, which is below the standard for smooth gameplay. The Low preset at 4K averages 89 FPS, but the visual quality reduction is substantial given the resolution's purpose.
The data suggests that for most users, the Medium preset is the recommended starting point. It provides the most consistent frame rates across all resolutions, and the minimum FPS values are always above 55 FPS. The High preset is a viable alternative at 1080p and 1440p for those who prioritize visual quality, but at 4K it becomes borderline. The Ultra preset is only recommended at 1080p, where it still maintains an average of 98 FPS.
How This Combo Ranks — use comboRankInGame vs other tested combos
The AMD Ryzen 5 5600G with the NVIDIA GeForce RTX 3070 Ti ranks 1330 out of 3703 tested combos in Greedfall. This places the combination in the 36th percentile of all tested configurations, meaning roughly 64% of tested combos perform better in this game. This ranking is notable because the GPU alone sits in the 75th percentile of all GPUs, and the CPU sits in the 74th percentile of all CPUs. The combined rank being lower than either component's individual percentile suggests that the pairing, while capable, does not maximize the potential of either component in this specific game.
The combo rank of 1330 out of 3703 indicates that there are 2373 tested combinations that outperform this setup in Greedfall. However, it is important to note that this rank is specific to this game and does not reflect general-purpose performance. The RTX 3070 Ti's average benchmark score of 29945 places it near the NVIDIA GeForce RTX 5070 Mobile (29928, delta 0.1%) and the AMD Radeon RX 6800 (30095, delta -0.5%). The RTX 2080 Ti scores 29783 with a delta of 0.5%, and the RX 6700 scores 30433 with a delta of -1.6%. These rival comparisons show that the GPU is competitive with other high-end cards from its generation and the generation immediately following.
The CPU's average benchmark score of 21088 is nearly identical to its nearest rivals, with all deltas within 0.4%. This means the 5600G's synthetic performance is well understood relative to other mid-range processors. The fact that the combo ranks in the 36th percentile suggests that Greedfall may be more sensitive to GPU performance than CPU performance, as higher-ranked combos likely pair the same or similar GPUs with more powerful CPUs, or use higher-end GPUs entirely.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture with the GA104 chip, manufactured on an 8 nm process at Samsung. It features 6144 shading units, 192 texture mapping units, and 96 render output units. The card has 48 ray tracing cores and 192 tensor cores, supporting DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The GPU operates with a base clock of 1575 MHz and a boost clock of 1770 MHz.
The memory subsystem is a critical component for this game's performance. The RTX 3070 Ti has 8 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 608.3 GB/s. The memory clock is 1188 MHz with 19 Gbps effective data rate. At 4K resolution with Ultra settings, the 40 FPS average suggests that the GPU is being pushed to its limits, likely due to both the pixel fill rate and the memory bandwidth requirements of high-resolution textures.
The GPU's compute capabilities include a pixel rate of 169.9 GPixel/s and a texture rate of 339.8 GTexel/s. The FP32 performance is 21.75 TFLOPS, with FP16 also at 21.75 TFLOPS (1:1). These figures place the GPU in a strong position for modern games, though Greedfall, released in 2019, may not fully utilize all of these capabilities. The card's 290 W TDP and suggested 600 W PSU indicate that it draws significant power, but this does not directly correlate with the measured FPS results.
The GPU's benchmark scores show a PassMark G3D score of 23356 and a PassMark GPU Compute score of 11601. In Geekbench, it scores 119718 in OpenCL and 139541 in Vulkan. These synthetic results are consistent with the GPU's 75th percentile ranking among all GPUs. The nearest rivals include the RTX 5070 Mobile (29928, delta 0.1%) and the RX 6800 (30095, delta -0.5%), suggesting the RTX 3070 Ti is competitively positioned against both previous-generation and new-generation cards.
The VRAM capacity of 8 GB is a consideration for 4K gaming, particularly with high-resolution textures. The measured results show that at 4K Ultra, the average FPS drops to 40, which could be partially attributed to memory constraints. However, at 4K Medium, the average rises to 70 FPS, indicating that reducing texture quality and other memory-intensive settings alleviates the pressure on the 8 GB frame buffer.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
At 1920x1080, the measured results are as follows: Low preset averages 214 FPS, Medium averages 168 FPS with a minimum of 143 FPS and maximum of 194 FPS, High averages 153 FPS, and Ultra averages 98 FPS. This resolution shows the widest spread between presets, with a difference of 116 FPS between Low and Ultra. The Medium preset's minimum of 143 FPS indicates that even in demanding scenes, the frame rate stays well above display refresh rates.
At 2560x1440, the averages are: Low at 149 FPS, Medium at 117 FPS with a minimum of 99 FPS and maximum of 134 FPS, High at 106 FPS, and Ultra at 68 FPS. The spread between Low and Ultra at this resolution is 81 FPS, narrower than at 1080p. The Medium preset's minimum of 99 FPS is just below the 100 FPS threshold, which is a notable data point for users with high-refresh-rate 1440p displays.
At 3840x2160, the averages are: Low at 89 FPS, Medium at 70 FPS with a minimum of 59 FPS and maximum of 80 FPS, High at 63 FPS, and Ultra at 40 FPS. This resolution shows the smallest spread between presets, with a difference of 49 FPS between Low and Ultra. The Medium preset's minimum of 59 FPS is the lowest measured value across all presets and resolutions, making it the only data point that falls below the 60 FPS standard.
The pattern across all resolutions is consistent: Medium provides a meaningful improvement over Low in visual quality with a moderate FPS cost, while High and Ultra offer diminishing returns at increasing performance costs. The data shows that the RTX 3070 Ti can handle 1440p gaming comfortably at Medium settings, and 4K gaming only with preset reductions.
FAQ
Q: What is the best resolution and setting combo for this system in Greedfall?
A: At 1440p Medium, the combo achieves 117 FPS average with a 99 FPS minimum, providing the best balance of visual quality and performance. At 4K, the Medium preset averages 70 FPS with a 59 FPS minimum, which is the only 4K preset above 60 FPS average.
Q: How does the 4K Ultra performance compare to 1080p Ultra?
A: At 4K Ultra, the average FPS is 40, while at 1080p Ultra, it is 98 FPS. This represents a 59% reduction in performance when moving from 1080p to 4K at the same preset.
Q: Is the CPU or GPU the limiting factor at 1080p?
A: The 1080p Low preset achieves 214 FPS, while 1080p High drops to 153 FPS. The substantial drop with increased graphical settings suggests the GPU becomes the limiting factor even at 1080p High, though the CPU is capable of higher frame rates as shown by the Low preset result.
Q: What is the lowest measured FPS in the entire dataset?
A: The lowest measured minimum FPS is 59 FPS at 4K Medium settings. The lowest average FPS is 40 FPS at 4K Ultra settings.
Q: How does the RTX 3070 Ti compare to its nearest GPU rivals in synthetic benchmarks?
A: The RTX 3070 Ti has an average benchmark score of 29945. The RTX 5070 Mobile scores 29928 with a delta of 0.1%, the RX 6800 scores 30095 with a delta of -0.5%, and the RTX 2080 Ti scores 29783 with a delta of 0.5%.
Q: What percentile does this combo rank in among all tested combos for Greedfall?
A: The combo ranks 1330 out of 3703 tested combos, placing it in the 36th percentile of all tested configurations for this game.
Hardware Specifications
AMD Ryzen 5 5600G
NVIDIA GeForce RTX 3070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600G + NVIDIA GeForce RTX 3070 Ti in Greedfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 89.0 |
| 3840x2160 | Medium | 70.0 |
| 3840x2160 | High | 63.0 |
| 3840x2160 | Ultra | 40.0 |
| 2560x1440 | Low | 149.0 |
| 2560x1440 | Medium | 117.0 |
| 2560x1440 | High | 106.0 |
| 2560x1440 | Ultra | 68.0 |
| 1920x1080 | Low | 214.0 |
| 1920x1080 | Medium | 168.0 |
| 1920x1080 | High | 153.0 |
| 1920x1080 | Ultra | 98.0 |
Greedfall with Ryzen 5 5600G + Other GPUs
See how Greedfall performs with the same CPU but different graphics cards.
Greedfall with RTX 3070 Ti + Other CPUs
See how Greedfall performs with the same GPU but different processors.
Other Games with Ryzen 5 5600G + RTX 3070 Ti
Explore FPS benchmarks for other games using this same hardware combination.