Fivem

Fivem with the Intel Core i5-14600KF and AMD Radeon RX 7900 XTX presents a high-end pairing that scales predictably across resolutions, but the data reveals a clear hierarchy in where the bottlenecks lie. At 1080p, the combination is exceptionally fast, with the Low preset hitting 301.6 FPS and even the demanding Ultra preset maintaining 147.3 FPS. Moving to 1440p, performance remains strong: Low drops to 199.4 FPS, while Ultra settles at 95.8 FPS. At 4K, the load shifts decisively toward the GPU, with Low producing 109.7 FPS and Ultra falling to 54.8 FPS.

The scaling pattern from 1080p to 4K shows a consistent reduction in frame rates, but the magnitude of the drop varies by settings tier. For the Low preset, 4K performance is 63.6% lower than 1080p (301.6 to 109.7 FPS), while the Ultra preset sees a smaller relative decline of 62.8% (147.3 to 54.8 FPS). This suggests that even at lower settings, the RX 7900 XTX becomes the limiting factor at 4K, as the CPU is able to feed frames faster than the GPU can render them. At 1080p, the opposite is true: the CPU’s single-thread performance, evidenced by a Geekbench single-core score of 2778, keeps up with the GPU’s output, making the system more balanced.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data shows a steep curve when moving from 1920x1080 to 3840x2160. At 1080p with High settings, the combo delivers 190.5 FPS, which drops to 122.3 FPS at 1440p and then to 72.2 FPS at 4K. That is a 62.1% reduction from 1080p to 4K. For Medium settings, the figures are 236 FPS at 1080p, 154.6 FPS at 1440p, and 87.9 FPS at 4K, a decline of 62.8%. The Low preset shows a similar trend: 301.6 FPS at 1080p, 199.4 FPS at 1440p, and 109.7 FPS at 4K, a 63.6% drop.

These percentages indicate that the GPU is the dominant constraint at higher resolutions. The RX 7900 XTX, with its 24 GB of GDDR6 memory and 960.0 GB/s bandwidth, handles the pixel throughput reasonably well, but the absolute numbers at 4K Ultra (54.8 FPS) suggest that the card is nearing its practical limit for this game at maximum settings. The CPU’s role is more pronounced at 1080p, where the frame rates exceed 300 FPS on Low — that performance is only achievable if the processor can issue draw calls fast enough. The i5-14600KF, with a boost clock of 5.30 GHz and 14 cores, appears sufficient for that task.

How This Combo Ranks — use comboRankInGame vs other tested combos

In the database of tested combinations, this particular CPU-GPU pairing holds the 250th position out of 1792 combos for Fivem. That places it in the top 14% of all tested systems, which is a strong showing given the game’s multiplayer nature. The rank reflects the balance between the i5-14600KF’s compute capabilities and the RX 7900 XTX’s rasterization strength. The CPU’s average benchmark score of 49367 puts it at the 93rd percentile among all CPUs, and its nearest rivals include the Intel Core i5-14600K (0.4% faster), the AMD EPYC 4345P (0.5% slower), and the AMD Ryzen 9 5950X (0.6% faster). The GPU’s average score of 44019 places it at the 85th percentile among all GPUs, with the NVIDIA GeForce RTX 4070 Ti trailing by 2% and the AMD Radeon Pro 580 leading by 0.4%.

The combo rank of 250 suggests that while the individual components are high-performers, there are 249 other pairings that deliver higher FPS in Fivem. This is likely due to the game’s engine being sensitive to both CPU single-thread speed and GPU memory bandwidth. The i5-14600KF’s 20 threads help with the game’s background tasks, but the RX 7900 XTX’s 24 GB frame buffer is more than enough for Fivem’s world streaming. The rank indicates that this is a competent setup, but not the absolute top tier — users with higher-binned CPUs or GPUs with faster memory clocks may see better results.

Settings Recommendations — which preset gives the best experience per the measured rows

Looking at the measured FPS across all presets and resolutions, the High preset at 1440p offers the best balance of visual quality and performance. At 122.3 FPS, it remains well above the 60 FPS threshold for smooth gameplay while providing a significant visual upgrade over Low. The Medium preset at 1440p hits 154.6 FPS, which is faster but comes with reduced visual fidelity. For 4K users, the Low preset at 109.7 FPS is the only option that stays above 100 FPS, but the High preset at 72.2 FPS is still playable for those who prioritize image quality over raw speed. The Ultra preset at 4K (54.8 FPS) dips below the 60 FPS mark, which may cause noticeable stutter in fast-paced multiplayer scenarios.

At 1080p, the Ultra preset is viable at 147.3 FPS, making it the best choice for competitive play where high refresh rate monitors are common. The Low preset at 301.6 FPS is excessive unless the user has a 300 Hz display, which is rare. The data suggests that for most users, the High preset is the sweet spot: it delivers 190.5 FPS at 1080p, 122.3 FPS at 1440p, and 72.2 FPS at 4K, all of which are playable. The Medium preset offers a small FPS boost (236 FPS at 1080p) but at the cost of visual detail that the RX 7900 XTX can easily handle at High.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the maximum average FPS achievable with this combo at 1080p?

A: The highest measured average FPS is 301.6, which occurs at 1920x1080 with the Low preset. The Medium preset reaches 236 FPS, and the Ultra preset is still strong at 147.3 FPS.

Q: Does the combo maintain 60+ FPS at 4K on any preset?

A: Yes. The Low preset averages 109.7 FPS, Medium 87.9 FPS, and High 72.2 FPS at 3840x2160. Only the Ultra preset falls below 60 FPS, with an average of 54.8 FPS.

Q: How does the CPU compare to its nearest rival in overall benchmark score?

A: The Intel Core i5-14600KF has an average benchmark score of 49367, which is 0.4% lower than the Intel Core i5-14600K (49166) and 0.6% lower than the AMD Ryzen 9 5950X (49062). It is 0.5% faster than the AMD EPYC 4345P (49595).

Q: What is the GPU’s memory bandwidth and how does it affect 4K performance?

A: The RX 7900 XTX has a memory bandwidth of 960.0 GB/s, which supports its 24 GB GDDR6 frame buffer. At 4K, this bandwidth is sufficient for the High preset (72.2 FPS) but not for Ultra (54.8 FPS), indicating a bandwidth or compute limit at the highest settings.

Q: Is the combo more CPU-bound or GPU-bound at 1440p?

A: At 1440p, the scaling from High (122.3 FPS) to Low (199.4 FPS) shows a 63% increase in performance, suggesting that the GPU is still the primary limiter. The CPU is likely not saturated until the Low preset, where the frame rate approaches 200 FPS.

Q: How many combos rank worse than this pairing in Fivem?

A: This combo ranks 250th out of 1792 tested combinations, meaning 1542 combos rank worse. The top 249 combos deliver higher average FPS in this game.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 7900 XTX is built on the RDNA 3.0 architecture with a Navi 31 chip and a 5 nm process node. Its memory configuration is substantial: 24 GB of GDDR6 on a 384-bit bus, yielding a bandwidth of 960.0 GB/s. The GPU’s base clock is 1929 MHz, with a boost clock of 2498 MHz and a game clock of 2365 MHz. These clocks directly influence the 4K results, where the GPU is the bottleneck. At 4K Ultra, the average FPS is 54.8, which is 24.2% lower than the 4K High preset (72.2 FPS). This drop is attributable to the increased shader and texture workload, which the 6144 shading units and 192 ROPs must process. The pixel rate of 479.6 GPixel/s and texture rate of 959.2 GTexel/s are high, but the Ultra preset likely introduces effects that stress the memory subsystem.

The GPU’s 24 GB VRAM is more than adequate for Fivem, as the game’s world streaming and texture loads rarely exceed 8 GB, even at 4K. The excess VRAM is not a performance factor here, but it provides headroom for future mods or higher-resolution texture packs. The GPU’s FP32 throughput of 61.39 TFLOPS is high, but Fivem is not a compute-heavy title; it relies more on raw fill rate and memory bandwidth. The measured FPS at 4K High (72.2) versus 4K Medium (87.9) shows a 21.7% improvement when dropping from High to Medium, indicating that the GPU’s shading units are the limiting factor at High, not the memory.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i5-14600KF is a 14-core, 20-thread processor with a base clock of 3.50 GHz and a boost clock of 5.30 GHz. It is part of the Raptor Lake Refresh generation, built on a 10 nm process. The CPU’s cache hierarchy includes 80 KB of L1 per core, 2 MB of L2 per core, and 24 MB of shared L3. For Fivem, which is a multiplayer title with significant CPU overhead for network synchronization and entity management, the CPU’s single-thread performance is critical. The Geekbench single-core score of 2778 and Cinebench R23 single-core score of 4643 are strong indicators of its ability to handle draw calls. At 1080p Low, the combo achieves 301.6 FPS, which is the highest measured value. This frame rate is only possible if the CPU can issue render commands quickly enough, and the 5.30 GHz boost clock is the key enabler.

The multi-threaded capabilities also matter, as Fivem servers often run background scripts and physics simulations. The CPU’s Cinebench R23 multi-core score of 32889 and Passmark multi-thread score of 38697 show robust parallel performance. However, the scaling from 1080p to 1440p shows a 35.8% drop in FPS at High settings (190.5 to 122.3), which indicates that the GPU becomes the limiting factor at higher resolutions. The CPU is not the bottleneck until the frame rate approaches 300 FPS, which only occurs at 1080p Low. The CPU’s 125 W TDP and unlocked multiplier allow for overclocking, but the stock boost clock is sufficient to keep up with the RX 7900 XTX in this game.