Fivem

The AMD Ryzen 9 9900X3D paired with the NVIDIA GeForce RTX 3050 4 GB presents a stark contrast in capabilities within Fivem, placing the combination at rank 2626 out of 3005 tested combos. The data indicates a system where the 12-core processor provides immense headroom, but the 4 GB graphics card becomes the primary gatekeeper for performance, particularly at higher resolutions and presets. Benchmark results show that while the CPU can drive very high frame rates at lower settings, the GPU's memory and bandwidth constraints cap the experience, making preset and resolution choices critical for a smooth experience.

FAQ

Q: How does this combo rank in Fivem compared to other tested systems?

A: The combination ranks at position 2626 out of 3005 tested combos. This places it in the lower percentile of tested systems, indicating that while it can run the game, many other hardware pairings deliver better overall performance.

Q: What is the best frame rate this combo achieves in Fivem?

A: The highest average frame rate recorded is 113 FPS at 1920x1080 resolution with Low settings. This is the only configuration in the data that breaks the 100 FPS mark, showing the system's potential when graphical load is minimized.

Q: Can this system handle 4K resolution in Fivem?

A: The data shows 4K performance is generally poor. At 3840x2160, the average frame rates are 41 FPS on Low, 32 FPS on Medium, 26 FPS on High, and 20 FPS on Ultra. These figures suggest that 4K is only marginally playable on the lowest preset and becomes increasingly unplayable as settings increase.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the difference is substantial. Low settings produce an average of 74 FPS, while Ultra settings drop to an average of 36 FPS. This represents a significant 38 FPS drop, or roughly a 51% reduction in average frame rate when moving from the lowest to the highest quality preset.

Q: Is the CPU or GPU more likely to be the limiting factor in Fivem?

A: The data strongly suggests the GPU is the limiting factor. The CPU is a high-end 12-core processor with a 91st percentile ranking among all CPUs, while the GPU sits at the 50th percentile. The fact that frame rates scale dramatically with resolution and settings, which primarily affects GPU load, points to the RTX 3050 4 GB as the bottleneck.

Q: Are there any settings where the frame rate is consistently above 60 FPS?

A: Yes, but only in specific configurations. At 1920x1080, both Low (113 FPS) and Medium (89 FPS) presets average above 60 FPS. At 2560x1440, only the Low preset (74 FPS) achieves this. The High preset at 1080p (71 FPS) also crosses the 60 FPS threshold.

CPU Role

The AMD Ryzen 9 9900X3D is a desktop processor from the 9000 series, built on the Zen 5 architecture using a 4 nm process. It features 12 cores and 24 threads, with a base clock of 4.40 GHz and a boost clock of 5.50 GHz. This is a top-tier component, as evidenced by its 91st percentile ranking among all CPUs in the benchmark database. Synthetic benchmarks like Cinebench R23 highlight its strength, with a multicore score of 47737 and a single-core score of 6739. This processing power ensures that the CPU will rarely be the source of frame rate dips in a multiplayer game like Fivem, which can be sensitive to physics and entity simulation.

The processor's 128 MB of L3 cache is a significant asset for gaming, as it allows for a large amount of data to be stored on-chip for rapid access. In a game like Fivem, which is built on a modified Grand Theft Auto V engine and can involve complex user-created scripts, this large cache can help maintain consistent frame pacing by reducing the need to fetch data from system memory. The CPU supports DDR5 memory with dual-channel architecture, providing a high-bandwidth path for game assets and world data that the CPU needs to process. With a launch MSRP of $599, it is a high-end investment that provides substantial multi-threaded and single-threaded performance.

In the context of this specific combo, the CPU's role is to feed frames as fast as possible, but its potential is largely untapped. Benchmark results show that at 1080p Low settings, the system achieves 113 FPS average, which is likely close to what the CPU can push in this scenario. However, as resolution and settings increase, the frame rate drops significantly. For example, at 4K Ultra, the average FPS falls to 20. This indicates that the GPU is unable to keep up with the CPU's output, turning the graphics card into the primary performance limiter. The CPU's high core count and clock speeds provide a solid foundation, but they cannot compensate for the GPU's limitations in graphics-heavy workloads.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is based on the Ampere architecture and is a relatively low-power entry-level card from the GeForce 30-series. It operates with a base clock of 1545 MHz and a boost clock of 1740 MHz. The most critical specification for this analysis is its 4 GB of GDDR6 memory, which is supported by a 128-bit memory bus and a bandwidth of 192.0 GB/s. This is a modest amount of VRAM by modern standards, and the benchmark data suggests it is a major factor in the performance ceiling observed in Fivem.

The GPU's memory constraints become evident when examining the performance scaling. The gap between Low and Ultra settings is stark. At 1920x1080, the difference is 58 FPS (113 FPS on Low vs 55 FPS on Ultra). At 2560x1440, the gap is 38 FPS (74 FPS vs 36 FPS). At 3840x2160, the gap is 21 FPS (41 FPS vs 20 FPS). This scaling pattern indicates that as the game tries to load more textures and detail into the 4 GB frame buffer, the card runs out of memory, causing severe performance penalties. The 4 GB capacity is simply insufficient for high-detail textures at higher resolutions, forcing the system to swap data and stutter.

The GPU sits at the 50th percentile among all GPUs, which is a middle-of-the-road position. It features 2048 shading units, 64 texture mapping units, and 32 ROPs. While it supports modern APIs like DirectX 12 Ultimate, its 7.127 TFLOPS of FP32 performance is limited. In Fivem, which can be heavily modded and have variable performance depending on the server, the GPU's role is to render the game world. The data shows that it does this adequately at lower settings and resolutions, but it is not capable of delivering a smooth experience at high or ultra presets, especially at 1440p or 4K. The 90 W TDP and suggested 250 W PSU indicate it is an efficient card, but efficiency does not translate to high-end performance here.

How This Combo Ranks

The combo’s rank of 2626 out of 3005 tested combinations places it in the bottom 13% of all systems tested for Fivem. This is a low ranking that reflects the significant imbalance between the high-end CPU and the entry-level GPU. While the CPU is performing in the 91st percentile of all CPUs, the GPU is only in the 50th percentile. This pairing results in a system that is heavily bottlenecked by the graphics card in most scenarios.

The ranking implies that a majority of other tested hardware combinations deliver a better experience in Fivem. While the CPU is powerful enough to handle any server-side calculations or complex scripts, the GPU's 4 GB VRAM and limited compute power prevent it from translating that CPU strength into high frame rates at visually demanding settings. The data suggests that this combo is better suited for competitive play at low settings, where the high CPU performance can help maintain high FPS, rather than for immersive, high-fidelity gameplay. The performance gap between this combo and higher-ranked ones is likely due to the GPU, as a more balanced system with a mid-range GPU would likely rank significantly higher.

Measured FPS Breakdown

The measured FPS data provides a detailed view of the system's performance across different resolutions and presets. At 1920x1080, the system shows a wide range of performance. On Low settings, it achieves an average of 113 FPS, which is the highest score in the entire dataset. Medium settings produce 89 FPS, with a minimum of 75 FPS and a maximum of 102 FPS. High settings drop to an average of 71 FPS. Ultra settings bring the average down to 55 FPS. This shows that at 1080p, the system is capable of very high frame rates at lower presets, but struggles to maintain 60 FPS at Ultra.

Moving to 2560x1440, performance takes a significant hit. Low settings average 74 FPS, which is still respectable. Medium settings average 58 FPS, with a minimum of 50 and a maximum of 67 FPS. High settings drop to 47 FPS, and Ultra settings fall to 36 FPS. The data shows that at 1440p, the system begins to struggle to maintain a smooth 60 FPS experience unless settings are kept at Low.

At 3840x2160, the system is largely unable to provide a playable experience. Low settings average only 41 FPS. Medium settings have an average of 32 FPS, with a minimum of 28 and a maximum of 37 FPS. High settings average 26 FPS, and Ultra settings average just 20 FPS. These numbers indicate that 4K gaming is not a viable option for this hardware combination in Fivem, as the frame rates are too low for a smooth experience, even on the lowest preset. The data clearly shows the GPU's limitations, as the frame rate scales almost linearly with the number of pixels being rendered.

Settings Recommendations

Based on the measured FPS data, the recommended settings for this combo depend heavily on the target resolution and desired frame rate. For players with a 1920x1080 monitor, the Low preset offers the best experience in terms of raw frame rate, providing an average of 113 FPS. This is ideal for competitive play or for users with high refresh rate monitors. The Medium preset is also a strong option, offering a very playable 89 FPS average with improved visual quality. The High preset at 71 FPS is acceptable for most players, but the Ultra preset at 55 FPS falls below the 60 FPS threshold and is not recommended for a consistently smooth experience.

For 2560x1440 users, the options are more limited. The Low preset is the only one that consistently breaks the 60 FPS barrier, with an average of 74 FPS. The Medium preset is playable at 58 FPS, but the minimum of 50 FPS suggests there could be noticeable dips in performance during intense scenes. High (47 FPS) and Ultra (36 FPS) presets are not recommended, as they will likely result in a stuttery experience. For a smooth 1440p experience, Low settings are the only reliable choice.

At 3840x2160, the data suggests that this combo is not suited for 4K gaming in Fivem. Even the Low preset yields only 41 FPS, which is below the 60 FPS target. The Medium preset at 32 FPS and High at 26 FPS are not playable for most users. The Ultra preset at 20 FPS is a slideshow. Therefore, it is recommended that users avoid 4K resolution with this hardware. The performance data indicates that the GPU's 4 GB VRAM is a severe limitation at this resolution, and no preset can overcome the lack of memory bandwidth and capacity. The best experience is achieved at 1080p with Medium or Low settings, or 1440p with Low settings.