Fivem

The AMD Ryzen 9 9900X and AMD Radeon RX 7900 XTX combination delivers a remarkably versatile experience in Fivem, with performance scaling predictably across resolutions and presets. The measured data indicates that this pairing is capable of high refresh rate gameplay at 1080p and 1440p, while maintaining playability at 4K. The benchmark results show a clear hierarchy in settings, with the choice of preset ultimately determining whether the experience is geared toward maximum visual fidelity or maximum frame rates.

Settings Recommendations

For players targeting the highest possible frame rates, the Low preset at 1920x1080 yields an average of 299.8 FPS, which is effectively the ceiling for this configuration. However, this comes at a significant cost to visual quality. The data indicates that the Medium preset at 1080p, producing 240.8 FPS, offers a substantially better balance, delivering a 19.7% reduction in frame rate compared to Low while likely providing a noticeably richer visual presentation. This makes Medium the recommended starting point for competitive or high-refresh-rate displays at 1080p.

At 2560x1440, the High preset achieves 122 FPS, which is a strong result for a multi-player title. The Medium preset at this resolution provides 158 FPS, a 29.5% improvement over High, but the High preset’s frame rate remains well within the range of high-refresh-rate monitors. The Ultra preset at 1440p drops to 94.8 FPS, which is still playable but represents a 39.9% decrease from Medium. For most users at 1440p, the High preset offers the most sensible trade-off between visual fidelity and the 122 FPS average, ensuring smooth gameplay without sacrificing too much detail.

At 3840x2160, the situation changes dramatically. The High preset averages 67.4 FPS, which is a solid result for 4K gaming. The Medium preset at this resolution provides 86.8 FPS, a 28.8% increase over High, making it the preferred choice for 4K users who want to stay above the 60 FPS threshold comfortably. The Ultra preset at 4K falls to 50.3 FPS, which may be below the target for many players with 60Hz displays. The Low preset at 4K, at 110.5 FPS, demonstrates that the hardware is not limited by resolution but by the preset’s graphical load. The data suggests that Medium at 4K is the sweet spot, providing a 86.8 FPS average that balances visual quality with a fluid experience.

GPU Role

The AMD Radeon RX 7900 XTX is the primary driver of frame rate in Fivem, particularly at higher resolutions. The GPU’s 24 GB of GDDR6 memory on a 384-bit bus provides a substantial memory bandwidth of 960.0 GB/s, which is a critical asset for a game that often involves complex, user-generated content and large draw distances. The data shows a consistent pattern: as resolution increases, the frame rate drops, indicating that the GPU is the scaling bottleneck. For instance, at High settings, the average FPS falls from 191.4 at 1080p to 122 at 1440p and then to 67.4 at 4K. This represents a 36.3% drop from 1080p to 1440p and a further 44.8% drop from 1440p to 4K.

The GPU’s boost clock of 2498 MHz and game clock of 2365 MHz are key to its performance. The benchmark scores place this GPU in the 85th percentile of all GPUs, and its average benchmark score of 44019 is nearly identical to the AMD Radeon Pro 580, which scores 44195, a difference of -0.4%. It is also 0.8% ahead of the NVIDIA GeForce RTX 4090 Mobile and 2% ahead of the NVIDIA Quadro M6000, but 2% behind the NVIDIA GeForce RTX 4070 Ti. This data indicates that the RX 7900 XTX is a top-tier performer, but its relative standing changes slightly depending on the workload.

At 1080p, the GPU’s power is somewhat underutilized. The jump from High to Low settings at 1080p results in a 56.6% increase in frame rate (from 191.4 to 299.8 FPS), which suggests that the CPU is capable of feeding the GPU enough data to reach very high frame rates. However, the GPU is still the limiting factor, as the CPU’s single-thread performance is not the primary constraint at this resolution. The GPU’s 96 RT cores and 6144 shading units are more than sufficient for Fivem’s rendering demands, and the data shows that the card is never the bottleneck until the CPU’s limits are reached.

CPU Role

The AMD Ryzen 9 9900X, with its 12 cores and 24 threads, provides a robust foundation for Fivem, a game that is known to be sensitive to CPU performance, especially in multiplayer scenarios with many players and entities. The CPU’s Zen 5 architecture, with a base clock of 4.40 GHz and a boost clock of 5.60 GHz, delivers strong single-thread performance, which is crucial for the game’s primary game logic thread. The benchmark data shows a single-thread score of 1286 in 3DMark and a passmark single-thread score of 4672, indicating a high level of efficiency.

The CPU’s role becomes more apparent at lower resolutions. At 1080p with Low settings, the average FPS reaches 299.8. This high frame rate suggests that the CPU is capable of sustaining a very high level of throughput, but it also indicates that the CPU is nearing its limits, as the GPU is not fully saturated at this point. The difference between Low and Medium settings at 1080p is 59 FPS (from 299.8 to 240.8), which is a 19.7% drop. This drop is a result of the increased graphical load, but the fact that the FPS is still very high shows that the CPU is not a limiting factor until the settings are raised.

The CPU’s average benchmark score is 54450, which places it in the 94th percentile of all CPUs. Its nearest rival, the AMD Ryzen 9 9900X3D, scores 54681, a difference of -0.4%, making the performance essentially identical. The Intel Core i7-14700F scores 54097, which is 0.7% slower. The Intel Core Ultra 5 245K and 245KF are 1.5% and 1.8% faster, respectively. This data confirms that the 9900X is a high-end processor, and its performance in Fivem is more than adequate to avoid bottlenecking the RX 7900 XTX, except in the most extreme low-resolution, low-settings scenarios. The CPU’s 64 MB of shared L3 cache is also beneficial for handling the game’s asset streaming and entity management.

How This Combo Ranks

In the database of tested combinations, this pairing of the AMD Ryzen 9 9900X and the AMD Radeon RX 7900 XTX holds a combo rank of 263 out of 1792 tested combos. This places it in the top 14.7% of all configurations, indicating a high level of overall performance. The rank is likely influenced by the GPU’s strong performance at 4K and the CPU’s ability to push high frame rates at 1080p. The combination is well-balanced, as neither component is a clear weak link in the chain.

The rank suggests that while this is a potent setup, there are 262 other combinations that deliver higher frame rates in Fivem. These are likely to include configurations with more powerful GPUs or CPUs that have been specifically tuned for high-frequency gaming. However, the data shows that this combo is particularly effective at maintaining high performance across a wide range of resolutions and settings, making it a versatile choice. The fact that it outperforms 1529 other combos underscores its capability, and the balance between the CPU and GPU is evident in the relatively small frame rate drops when moving between presets at the same resolution.

Resolution Scaling

The FPS scaling from 1080p to 4K provides clear insight into the limiting component. At High settings, the average FPS drops from 191.4 at 1080p to 122 at 1440p and then to 67.4 at 4K. The percentage drop from 1080p to 1440p is 36.3%, and from 1440p to 4K is 44.8%. This pattern indicates a GPU-bound scenario at higher resolutions, as the frame rate decreases proportionally with the increase in pixel count. The GPU is the primary bottleneck when the resolution is raised.

However, at Low settings, the scaling is different. The FPS drops from 299.8 at 1080p to 196.5 at 1440p and then to 110.5 at 4K. The drop from 1080p to 1440p is 34.4%, which is similar to the High preset. But the drop from 1440p to 4K is 43.8%, which is slightly less pronounced. This suggests that at Low settings, the CPU begins to play a more significant role at 1080p, as the frame rates are so high that the CPU’s processing limits are approached. The fact that the 1080p Low result is 299.8 FPS, which is a very high number, indicates that the CPU is the limiting factor in that specific scenario.

The data reveals that the system is well-balanced for most use cases. At 1440p and 4K, the GPU is the clear limiting component. At 1080p with lower settings, the CPU becomes the limiting factor. This means that for users who primarily play at 1440p or 4K, the GPU is the component to upgrade for more performance. For users who play at 1080p with the intention of achieving maximum frame rates, the CPU’s single-thread performance will be the ceiling. Overall, the scaling behavior is typical of a high-end system, where the balance between CPU and GPU shifts depending on the resolution and graphical settings.