Fivem

# Fivem with AMD Ryzen 7 9850X3D + Intel Arc B570

The AMD Ryzen 7 9850X3D paired with the Intel Arc B570 delivers playable performance in Fivem, but the data shows a clear pattern: this combo is heavily GPU-limited at higher resolutions, while the 8-core Zen 5 processor with 96 MB of L3 cache has ample headroom to push frame rates much higher if the graphics card allowed it. At 1080p Low, the combo reaches 136 FPS average, but that drops to 24 FPS at 4K Ultra — a span that reveals both the strengths and the bottlenecks of this pairing.

Resolution Scaling

The measured FPS data shows a steep and consistent decline as resolution increases, which is the classic signature of a GPU-bound scenario. At 1920x1080 with Low settings, the combo averages 136 FPS. Moving to 2560x1440 Low drops that to 89 FPS — a 34.6% reduction. At 3840x2160 Low, the average falls to 50 FPS, which is 63.2% below the 1080p Low figure. This scaling is far steeper than what a CPU-bound configuration would show, indicating that the Intel Arc B570's 10 GB of GDDR6 memory and 160-bit bus are the limiting factors as pixel count rises.

The High settings row tells a similar story. At 1080p High, the average is 86 FPS. At 1440p High, it drops to 56 FPS (a 34.9% decrease), and at 4K High, it falls to 31 FPS (a 64.0% decrease from 1080p). The consistent ~35% penalty from 1080p to 1440p and another ~45% penalty from 1440p to 4K across both Low and High settings strongly suggests that the GPU's shading units, texture units, and memory bandwidth are saturated well before the CPU becomes a constraint.

Ultra settings amplify the issue further. At 4K Ultra, the combo manages only 24 FPS average — a figure that is effectively unplayable for smooth gameplay. The gap between Low and Ultra at any given resolution is substantial: at 1080p, Low averages 136 FPS while Ultra averages 67 FPS, a 50.7% drop. At 4K, Low averages 50 FPS while Ultra averages 24 FPS, a 52.0% drop. This consistent ~50% penalty from Low to Ultra across resolutions indicates that the visual quality settings are directly taxing the GPU's fixed resources, with no relief from the CPU side.

The data suggests that the limiting component at all resolutions above 1080p is the GPU. Even at 1080p Ultra, the 67 FPS average is well below what the Ryzen 7 9850X3D is capable of feeding, given its 92nd percentile ranking among all CPUs and its single-thread Passmark score of 4704. The CPU's 8 cores and 16 threads, running at a base clock of 4.70 GHz and boosting to 5.60 GHz, are more than sufficient for Fivem's multiplayer workloads, which tend to be single-thread-heavy. The bottleneck is clearly the Arc B570's 11.52 TFLOPS of FP32 compute and 380.0 GB/s of memory bandwidth.

GPU Role

The Intel Arc B570 is a mid-range graphics card built on the Xe2-HPG architecture, and its role in this combo is defined by its 10 GB of GDDR6 memory on a 160-bit bus with a bandwidth of 380.0 GB/s. The card's base and boost clocks are both 2500 MHz, which is a modest clock speed for a modern GPU. The memory runs at 2375 MHz, or 19 Gbps effective, which translates to the 380.0 GB/s figure. These specs place the card at the 65th percentile among all GPUs, with an average benchmark score of 20556.

In Fivem specifically, the GPU's role becomes increasingly dominant as resolution and settings rise. At 1080p Low, the GPU has enough headroom to deliver 136 FPS, but that number is still likely constrained by the game's single-threaded nature on the CPU side. However, the steep decline to 89 FPS at 1440p Low and 50 FPS at 4K Low indicates that the GPU's fill rate and memory bandwidth are being exhausted. The card's 80 ROPs and 144 TMUs, producing a pixel rate of 200.0 GPixel/s and a texture rate of 360.0 GTexel/s, are simply not enough to maintain high frame rates at 4K.

The VRAM capacity of 10 GB is adequate for Fivem at 1080p and 1440p, as the game is not particularly VRAM-hungry. However, at 4K Ultra, the combination of higher resolution and increased texture detail may push memory usage close to the limit, contributing to the 24 FPS average. The GPU's nearest rivals in synthetic benchmarks include the NVIDIA GeForce RTX 3070 Mobile (deltaPct 0.1), the Intel Arc A750 (deltaPct -0.1), and the NVIDIA Quadro M4000M (deltaPct 0.4), all of which score within 0.5% of the B570's average. This places the B570 in a competitive tier, but its performance in Fivem at 4K is clearly insufficient for smooth play.

The GPU's 18 ray tracing cores are present, but Fivem does not heavily utilize ray tracing, so they have minimal impact on these results. The card's DirectX 12 Ultimate support (12_2) is relevant, as Fivem can leverage DX12 features, but the measured data shows that raw rasterization performance is the determining factor. The GPU's compute performance, as evidenced by a Passmark GPU compute score of 7281, is modest, which further explains the 4K Ultra shortfall.

FAQ

Q: What is the best resolution to play Fivem with this combo for a smooth experience?

A: The data shows that 1920x1080 is the only resolution where all settings produce playable frame rates. At 1080p Ultra, the average is 67 FPS, which is above the 60 FPS threshold. At 2560x1440, only Low and Medium settings (89 FPS and 71 FPS respectively) stay above 60 FPS. At 3840x2160, even Low settings only reach 50 FPS, which is below 60 FPS.

Q: How does the Ryzen 7 9850X3D compare to its nearest CPU rivals?

A: The Ryzen 7 9850X3D has an average benchmark score of 58386, placing it at the 92nd percentile. Its nearest rival, the Intel Xeon Platinum 8260M, scores 58323, which is 0.1% lower. The Intel Core i9-14900 scores 58115, which is 0.5% lower, while the AMD Ryzen AI 9 HX 470 scores 58826, which is 0.7% higher. The Xeon w5-2545 scores 58504, which is 0.2% higher.

Q: Is the Intel Arc B570's 10 GB VRAM sufficient for Fivem?

A: Based on the measured FPS data, 10 GB of VRAM is sufficient for all tested settings and resolutions, as no out-of-memory errors or crashes were reported. However, the 4K Ultra result of 24 FPS suggests that the GPU's compute and memory bandwidth, rather than capacity, are the limiting factors. The 380.0 GB/s bandwidth is the more likely constraint at high resolutions.

Q: What settings should I use at 1440p to maintain a stable frame rate?

A: The data indicates that Medium settings at 2560x1440 produce an average of 71 FPS with a minimum of 60 FPS and a maximum of 81 FPS. This is the only 1440p setting with a recorded minimum above 60 FPS. Low settings average 89 FPS but have no recorded minimum, while High averages 56 FPS and Ultra averages 44 FPS, both below the 60 FPS threshold.

Q: How does this combo rank among all tested CPU-GPU combinations in Fivem?

A: The combo ranks 2396 out of 3005 tested combinations, placing it in the bottom 20.3% of all tested combos. This low ranking is primarily due to the GPU's limitations at higher resolutions, as the CPU's performance is above average relative to other processors.

Q: What is the frame rate difference between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings average 136 FPS, while Ultra settings average 67 FPS. This represents a 69 FPS difference, or a 50.7% reduction. The Medium settings average 107 FPS, and High settings average 86 FPS, showing a linear progression in performance cost as visual quality increases.

How This Combo Ranks

The AMD Ryzen 7 9850X3D + Intel Arc B570 combination ranks 2396 out of 3005 tested combos in Fivem, placing it in the bottom 20.3% of all configurations. This ranking is surprisingly low given the CPU's strong performance — the Ryzen 7 9850X3D sits at the 92nd percentile among all CPUs with an average benchmark score of 58386, and its nearest rival, the Intel Xeon Platinum 8260M, is just 0.1% behind. The CPU's 8 cores and 16 threads with a boost clock of 5.60 GHz and 96 MB of L3 cache should provide excellent gaming performance.

The weak link is the GPU. The Intel Arc B570 ranks at the 65th percentile among all GPUs, with an average benchmark score of 20556. Its nearest rivals — the NVIDIA GeForce RTX 3070 Mobile (0.1% higher), Intel Arc A750 (0.1% lower), NVIDIA Quadro M4000M (0.4% higher), and AMD Radeon R9 M390X (0.5% lower) — are all within a half-percent of its performance. This places the B570 in a competitive but not exceptional tier, and in a game like Fivem that scales heavily with resolution, the GPU's 11.52 TFLOPS of FP32 compute is insufficient for high-resolution play.

The ranking suggests that this combo is better suited for 1080p gaming than for higher resolutions. At 1080p, the combo delivers 67-136 FPS depending on settings, which is competitive. At 1440p, only Low and Medium settings exceed 60 FPS. At 4K, no settings achieve 60 FPS. The 24 FPS at 4K Ultra is particularly indicative of the GPU's limitations. If a user were to pair this same CPU with a more powerful GPU, the ranking would likely improve substantially, as the CPU has ample headroom — the data shows the CPU is not the bottleneck at any resolution tested.

The rank of 2396 out of 3005 means that approximately 609 other combos perform worse in Fivem. This places the combo in the lower third of all tested configurations, which is consistent with the GPU's mid-range positioning. The CPU is overqualified for this GPU in this game, as evidenced by the steep resolution scaling that points entirely to GPU limitation.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend entirely on the target resolution. For 1080p, Ultra settings are viable with an average of 67 FPS, though users seeking higher refresh rates should consider High settings at 86 FPS or Medium at 107 FPS for a smoother experience. The Low setting at 136 FPS is available for competitive play, but the visual quality trade-off is significant.

At 1440p, Medium settings provide the best balance, with an average of 71 FPS, a minimum of 60 FPS, and a maximum of 81 FPS. This is the only 1440p configuration that guarantees at least 60 FPS throughout the measured range. High settings at 56 FPS are borderline, while Ultra at 44 FPS and Low at 89 FPS are less optimal — Low sacrifices too much visual fidelity for the frame rate gain, and Ultra drops below the 60 FPS threshold.

At 4K, no settings provide a fully smooth experience. Low settings at 50 FPS is the highest average, but it still falls short of 60 FPS. Medium at 39 FPS (with a minimum of 33 FPS and maximum of 45 FPS) is playable but not ideal, while High at 31 FPS and Ultra at 24 FPS are too low for anything but screenshots. Users who must play at 4K should choose Low settings and accept the 50 FPS average, or reduce the resolution to 1440p for a better experience.

The data suggests that the best overall experience is at 1920x1080 with High settings, which delivers 86 FPS average — well above the 60 FPS threshold while maintaining reasonable visual quality. For users with 1440p monitors, Medium settings at 71 FPS is the recommended compromise. The Ultra preset is only recommended at 1080p, where the 67 FPS average is still playable.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. Low settings average 136 FPS, with no minimum or maximum recorded. Medium settings average 107 FPS, with a minimum of 91 FPS and a maximum of 123 FPS. High settings average 86 FPS, with no minimum or maximum recorded. Ultra settings average 67 FPS, with no minimum or maximum recorded. The spread from Low to Ultra is 69 FPS, indicating that each settings tier costs roughly 17-21 FPS on average.

At 2560x1440, performance drops noticeably. Low settings average 89 FPS, with no minimum or maximum recorded. Medium settings average 71 FPS, with a minimum of 60 FPS and a maximum of 81 FPS. High settings average 56 FPS, with no minimum or maximum recorded. Ultra settings average 44 FPS, with no minimum or maximum recorded. The spread from Low to Ultra is 45 FPS, showing that the GPU's limitations compress the range at higher resolutions.

At 3840x2160, performance falls below playable thresholds for most settings. Low settings average 50 FPS, with no minimum or maximum recorded. Medium settings average 39 FPS, with a minimum of 33 FPS and a maximum of 45 FPS. High settings average 31 FPS, with no minimum or maximum recorded. Ultra settings average 24 FPS, with no minimum or maximum recorded. The spread from Low to Ultra is 26 FPS, which is the smallest range of any resolution, indicating that the GPU is heavily saturated even at Low settings.

The most complete data set is for Medium settings, which has recorded minimum and maximum values at all three resolutions. At 1080p Medium, the range is 91-123 FPS. At 1440p Medium, the range is 60-81 FPS. At 4K Medium, the range is 33-45 FPS. This data provides a clear picture of the performance envelope: the combo can maintain a 60 FPS minimum only at 1080p and 1440p Medium, and cannot reach 60 FPS average at 4K under any settings.