Archeage

Archeage is a 2014 MMORPG that remains sensitive to both CPU and GPU scaling, and the data for the AMD Ryzen 7 9700X with the NVIDIA GeForce RTX 3060 Ti shows a system that is well-balanced at 1080p but increasingly GPU-limited as resolution climbs. The measured FPS rows in this database cover four settings presets at three resolutions, providing a clear picture of where this combo excels and where it falls short.

Resolution Scaling

The transition from 1920x1080 to 2560x1440 and then to 3840x2160 reveals a steep performance curve. At 1080p with Low settings, the system delivers 128 FPS average. Dropping to 1440p Low reduces that to 85.7 FPS, a decline of roughly one-third. Moving to 4K Low yields 52.7 FPS, which is less than half of the 1080p Low result. This pattern is consistent across all settings presets, indicating that resolution scaling is the dominant factor in performance loss.

At High settings, 1080p produces 80.1 FPS, 1440p produces 52.6 FPS, and 4K produces 28.5 FPS. The gap between 1080p and 1440p here is 27.5 FPS, while the gap between 1440p and 4K is 24.1 FPS. The scaling is not perfectly linear, but the trend is clear: each step up in resolution costs roughly half of the remaining headroom. At Ultra settings, the numbers are 51.1 FPS at 1080p, 34.3 FPS at 1440p, and 20.3 FPS at 4K. That final 4K Ultra result is barely playable, suggesting the GPU is overwhelmed by the combination of high pixel count and maximum detail.

The data shows that at 1080p, the system is likely balanced between CPU and GPU, because the difference between Low and Ultra is 76.9 FPS (128 vs 51.1), which is a wide spread. At 4K, the spread narrows to 32.4 FPS (52.7 Low vs 20.3 Ultra), implying that the GPU is the primary limiter, and lowering settings cannot fully compensate for the pixel load. For 1440p, the system sits in a middle ground, with Low at 85.7 FPS and Ultra at 34.3 FPS, a 51.4 FPS spread that still gives the user meaningful control over performance.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with a GA104 chip, fabricated on Samsung's 8 nm process. It has 4864 shading units, 152 texture mapping units, and 80 ROPs. Its base clock is 1410 MHz, with a boost clock of 1665 MHz. Memory clock runs at 1750 MHz, which translates to 14 Gbps effective, across an 8 GB GDDR6 memory interface with a 256-bit bus. This configuration yields a memory bandwidth of 448.0 GB/s. The GPU's pixel rate is 133.2 GPixel/s and texture rate is 253.1 GTexel/s, with FP32 performance rated at 16.20 TFLOPS.

In Archeage, the GPU's 8 GB VRAM appears sufficient at 1080p and 1440p, where even Ultra settings do not seem to cause catastrophic frame drops beyond what the compute load would predict. However, at 4K Ultra, the average FPS of 20.3 suggests the GPU is struggling substantially. The RTX 3060 Ti's percentile ranking among all GPUs is 69, and its average benchmark score is 25120. Its nearest rival is the AMD Radeon RX 6700M with an average score of 25180, a delta of -0.2%, meaning the RTX 3060 Ti is essentially tied with that mobile GPU. Other close rivals include the AMD Radeon RX 6600 at 25235 (delta -0.5%) and the AMD Radeon 890M at 25246 (delta -0.5%).

The GPU's 38 ray tracing cores and 152 tensor cores are present, but Archeage does not appear to leverage them significantly, as the measured FPS scales primarily with resolution and settings rather than showing any special acceleration. The 200 W TDP and dual-slot design are typical for this class. The 8 GB VRAM is the most likely bottleneck at 4K, where texture and geometry data exceed what the memory can efficiently handle, leading to the low 28.5 FPS at High and 20.3 FPS at Ultra.

CPU Role

The AMD Ryzen 7 9700X is an 8-core, 16-thread processor from the 9000 series, based on Zen 5 architecture with the Granite Ridge codename. It has a base clock of 3.80 GHz and a boost clock of 5.50 GHz, with a 65 W TDP. It supports DDR5 memory with dual-channel configuration and a bandwidth of 89.6 GB/s. The CPU has 80 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. It uses AMD Socket AM5 and PCIe Gen 5 with 24 lanes.

For a game like Archeage, which is an MMORPG with potentially many simultaneous players and entities, the CPU's multi-threaded performance is relevant. The 9700X scores 31588 in Cinebench R23 multi-core and 4459 in single-core. In Geekbench, it scores 17002 multi-core and 3353 single-core. Its 3DMark results show scaling from 2525 with 2 threads to 9771 with max threads, indicating that the CPU can utilize additional threads well. The CPU's percentile ranking is 89 among all CPUs, with an average benchmark score of 36029. Its nearest rival is the Intel Core i5-14500HX at 35940, a delta of 0.2%, meaning the 9700X is slightly ahead. The Intel Core Ultra 9 185H scores 36165, putting it 0.4% ahead of the 9700X. The AMD Ryzen 7 PRO 5845 scores 35802, which is 0.6% behind, and the Intel Core Ultra 5 225H scores 36328, 0.8% ahead.

In the measured FPS data, the CPU's influence is most visible at 1080p Low, where 128 FPS is achieved. This high frame rate indicates that the CPU is not a limiting factor at lower resolutions and settings. At 1080p Ultra, the FPS drops to 51.1, which is closer to the GPU's capability. The single-thread score of 4459 in Cinebench R23 suggests strong per-core performance, which matters for MMORPGs that often have a main game thread. The 16 threads help with background tasks and large-scale battles, but the data does not show any specific CPU bottleneck at 1440p or 4K, as the FPS decline tracks the GPU load.

Measured FPS Breakdown

At 1920x1080, the system delivers playable frame rates across all settings. Low settings average 128 FPS, Medium averages 112.9 FPS, High averages 80.1 FPS, and Ultra averages 51.1 FPS. The step from Low to Medium costs 15.1 FPS, from Medium to High costs 32.8 FPS, and from High to Ultra costs 29 FPS. This indicates that High settings are the most efficient at 1080p, offering a large visual upgrade over Medium for a moderate FPS loss, while Ultra demands a significant additional cost.

At 2560x1440, the averages are 85.7 FPS for Low, 77.7 FPS for Medium, 52.6 FPS for High, and 34.3 FPS for Ultra. The spread between Low and Ultra is 51.4 FPS, which is narrower than at 1080p. The difference between Low and Medium is only 8 FPS, suggesting that at 1440p, the GPU is starting to become more influential, and the CPU's headroom is less relevant. High settings still provide a smooth experience above 50 FPS, but Ultra drops below 35 FPS, which may be noticeable in fast-paced combat.

At 3840x2160, the averages drop sharply. Low settings yield 52.7 FPS, Medium yields 44.2 FPS, High yields 28.5 FPS, and Ultra yields 20.3 FPS. The gap between Low and Medium is 8.5 FPS, between Medium and High is 15.7 FPS, and between High and Ultra is 8.2 FPS. The data shows that 4K Low is the only setting that stays above 50 FPS, while Medium is still playable at 44.2 FPS. High and Ultra are below 30 FPS, which is likely too choppy for an MMORPG with action combat. The 4K results confirm that the RTX 3060 Ti is not suited for maximum detail at this resolution in Archeage.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Archeage?

A: The data shows 1920x1080 provides the most consistent performance, with all settings above 50 FPS, including Ultra at 51.1 FPS. 2560x1440 is viable with Low through High settings, but Ultra drops to 34.3 FPS.

Q: Does the Ryzen 7 9700X bottleneck the RTX 3060 Ti in this game?

A: Benchmark results indicate the CPU has strong single-thread performance (4459 in Cinebench R23 single-core) and multi-thread capability (31588 multi-core). At 1080p Low, the system reaches 128 FPS, suggesting no CPU bottleneck at lower settings. At higher resolutions, the GPU becomes the limiting factor.

Q: Is 8 GB of VRAM enough for Archeage at 4K?

A: The measured FPS at 3840x2160 shows 52.7 FPS on Low and 20.3 FPS on Ultra. The steep decline suggests the 8 GB memory size is insufficient for high-detail 4K, where the GPU's compute resources also fall short.

Q: How does this GPU compare to its nearest rivals?

A: The RTX 3060 Ti has an average benchmark score of 25120, placing it 0.2% behind the AMD Radeon RX 6700M (25180) and 0.5% behind the AMD Radeon RX 6600 (25235). It is effectively in the same performance tier.

Q: What FPS can I expect at 1440p with High settings?

A: The measured average FPS for 2560x1440 High is 52.6. This is above 50 FPS, which is generally acceptable for an MMORPG, though not ideal for competitive play.

Q: Does the CPU's 16 threads help in Archeage?

A: The 9700X scores 9771 in 3DMark with max threads versus 2525 with 2 threads, showing good scaling. For an MMORPG with many players, the extra threads can help maintain frame rates in crowded areas, but the measured data does not isolate this effect.

Settings Recommendations

For 1920x1080, the data supports using High settings as the best balance. High averages 80.1 FPS, which is smooth, and the step to Ultra costs 29 FPS for a visual gain that may not be worth it. Medium is also viable at 112.9 FPS if the user prefers higher frame rates, but High provides a better visual experience while staying well above 60 FPS.

For 2560x1440, High settings at 52.6 FPS is the recommended choice. It is the highest preset that remains above 50 FPS. Medium at 77.7 FPS is a solid alternative for users who prioritize frame rate stability, but the visual quality difference between Medium and High is often noticeable. Ultra at 34.3 FPS is not recommended, as the frame rate drops below the threshold for smooth gameplay in an MMORPG.

For 3840x2160, the only sensible options are Low at 52.7 FPS or Medium at 44.2 FPS. High at 28.5 FPS and Ultra at 20.3 FPS are too low for comfortable play. Medium is the best choice for users who want better visuals, as it stays above 40 FPS. Low is preferable if the user wants to maintain a frame rate closer to 60 FPS, but the visual compromise is significant. The data clearly shows that this combo is not designed for 4K Ultra in Archeage, and users with 4K displays should either lower resolution or accept reduced settings.

The overall pattern across all resolutions is that the RTX 3060 Ti is the limiting component, while the Ryzen 7 9700X provides ample headroom. The CPU's 89th percentile ranking and its proximity to rivals like the Intel Core i5-14500HX (0.2% ahead) confirm that it is not the bottleneck. The GPU's 69th percentile ranking and its close tie with the AMD Radeon RX 6700M (-0.2%) show that it is a mid-range part that struggles at high resolutions. For a practical build, this pairing works best at 1080p High or 1440p Medium/High, and users should avoid 4K Ultra unless they are willing to play at low frame rates.