Fivem

Fivem is a multiplayer modification platform that stresses both CPU and GPU depending on the scenario, and the measured results for the AMD Ryzen 5 7600 with the NVIDIA GeForce RTX 5070 Ti reveal a system that scales predictably across resolutions and settings. The data set provides twelve measured average frame rate points, spanning three resolutions and four quality presets, which allows for a clear analysis of where the bottleneck lies and how to optimize the experience.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor built on the Zen 4 architecture, codenamed Raphael, with a base clock of 3.80 GHz and a boost clock of 5.10 GHz. Its 32 MB of shared L3 cache and dual-channel DDR5 memory support with 83.2 GB/s of bandwidth are relevant for a multiplayer game like Fivem, where physics, script processing, and player positions often rely on single-threaded performance. Benchmark data shows the chip achieves a 3DMark single-thread score of 999 and a Passmark single-thread score of 3910, placing it in the 83rd percentile among all CPUs.

The processor’s multi-threaded results are also strong, with a 3DMark max-threads score of 6503 and a Cinebench R23 multi-core score of 22992. In the context of Fivem, the CPU’s single-thread strength is likely the more critical factor, as many game servers are not optimized for high core counts. The measured frame rates at 1080p with Low settings reach 320.9 FPS, which is the highest value in the entire data set and strongly suggests that the CPU is capable of feeding the GPU at lower resolutions. This is reinforced by the 3DMark 2-thread score of 1938, which indicates solid performance when only a few cores are heavily utilized. The Ryzen 5 7600’s average benchmark score of 26617 is nearly identical to its nearest rival, the AMD Ryzen 7 5800X3D, which scores 26574 with a delta of just 0.2%. The Intel Core i9-12900HK is also close at 26672, showing a -0.2% delta, meaning the 7600 sits in a tight competitive band for overall processing power.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is a Blackwell 2.0 architecture GPU with 16 GB of GDDR7 memory on a 256-bit bus, delivering a memory bandwidth of 896.0 GB/s. Its base clock is 2295 MHz with a boost clock of 2452 MHz, and the card features 8960 shading units, 280 texture mapping units, and 96 raster output units. The GPU’s FP32 throughput is 43.94 TFLOPS, which is a substantial amount of compute for rendering complex scenes. In the Passmark G3D benchmark, the card scores 32974, and its average benchmark score is 52086, placing it in the 87th percentile of all GPUs.

The nearest rival comparison is striking: the RTX 5070 Ti’s average score of 52086 is exactly equal to the NVIDIA GeForce RTX 4080’s 52085, with a delta of 0%. This indicates that, in aggregate benchmarks, these two cards are functionally identical. However, the measured FPS in Fivem shows the RTX 5070 Ti is not always the limiting factor. At 4K Ultra, the average frame rate drops to 55 FPS, which is the lowest measured value in the entire set. This suggests that at the highest resolution and settings, the GPU is under significant load, as the 16 GB VRAM buffer is likely being fully utilized with high-resolution textures and effects. The GPU’s Passmark DirectX 12 score of 127 is relatively low compared to its DirectX 11 score of 300, which could indicate driver-level inefficiencies in certain API paths, but the measured game data provides the more reliable picture.

Resolution Scaling

The resolution scaling data reveals a classic pattern of diminishing returns as pixel count increases. At 1080p with Low settings, the system achieves 320.9 FPS. Moving to 1440p Low drops this to 211.9 FPS, a reduction of approximately 34%. At 4K Low, the frame rate falls further to 115.2 FPS, which is another 46% drop from 1440p. This steep decline from 1080p to 4K at Low settings suggests the GPU is becoming more of a bottleneck as resolution increases, even at lower quality presets where the CPU should be able to keep up.

The scaling at Ultra settings is different in magnitude but similar in direction. At 1080p Ultra, the system produces 155.4 FPS. At 1440p Ultra, it falls to 100.6 FPS, a 35% reduction. At 4K Ultra, it drops to 55 FPS, which is a further 45% decline. The percentage drops are remarkably consistent across settings, hovering around 34-35% from 1080p to 1440p and 45-46% from 1440p to 4K. This consistency indicates that the limiting component shifts decisively toward the GPU at higher resolutions, regardless of the quality preset. The gap between Low and Ultra at the same resolution also grows with resolution: at 1080p, the difference is 165.5 FPS (320.9 vs 155.4), while at 4K, the difference is 60.2 FPS (115.2 vs 55). This narrowing spread at 4K confirms that the GPU’s rendering capacity, not the CPU’s processing speed, is the primary constraint at higher pixel counts.

Settings Recommendations

Examining the measured rows, the Medium preset appears to offer the best balance between visual quality and frame rate across all resolutions. At 1080p Medium, the system delivers 252.3 FPS, which is only 68.6 FPS below the Low setting but provides noticeably better visuals. At 1440p Medium, the average is 164.7 FPS, which remains well above the 144 Hz refresh rate common on many monitors. Even at 4K Medium, the system produces 90.8 FPS, which is a smooth experience for most players.

The High preset is also viable but begins to show strain at higher resolutions. At 1080p High, the average is 197.8 FPS, which is still excellent. At 1440p High, it drops to 129.4 FPS, which is playable but requires a 120 Hz or lower refresh rate to fully utilize. At 4K High, the average falls to 75.5 FPS, which is acceptable for slower-paced gameplay but may feel less responsive in competitive scenarios. The Ultra preset is the most demanding, with 155.4 FPS at 1080p, 100.6 FPS at 1440p, and 55 FPS at 4K. For players prioritizing smoothness over maximum visual fidelity, the data suggests using Medium at 4K or Ultra at 1440p, as the latter still maintains triple-digit frame rates. The Low preset offers the highest frame rates but sacrifices too much visual quality for the modest gains over Medium.

How This Combo Ranks

The combination of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 5070 Ti ranks 141st out of 1792 tested combos in Fivem, placing it in the top 8% of all configurations. This is a strong result, but the ranking is not solely a function of raw hardware power. The CPU’s 83rd percentile ranking and the GPU’s 87th percentile ranking suggest that the combo performs slightly below what the individual component percentiles might predict. This is likely due to Fivem’s specific workload, which can be heavily dependent on server-side code and network latency, potentially limiting the benefits of high-end hardware.

In the context of the nearest rivals, the CPU is essentially tied with the AMD Ryzen 7 5800X3D, which has a delta of 0.2%, and the Intel Core i9-12900HK, which has a delta of -0.2%. The GPU is tied with the RTX 4080 at a 0% delta. This means that swapping the 7600 for a 5800X3D or the 5070 Ti for a 4080 would likely produce nearly identical frame rates in Fivem. The ranking of 141 out of 1792 indicates that many combos with more expensive or higher-tier parts achieve better results, but the measured data shows this pairing is well-balanced, with neither component severely bottlenecking the other at typical gaming resolutions.

FAQ

Q: What is the highest average frame rate measured for this combo in Fivem?

A: The highest measured average frame rate is 320.9 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the RTX 5070 Ti compare to the RTX 4080 in aggregate benchmarks?

A: The RTX 5070 Ti has an average benchmark score of 52086, while the RTX 4080 scores 52085, resulting in a delta of 0% — they are effectively identical in overall performance.

Q: At what resolution and settings does the frame rate drop below 60 FPS?

A: The only measured configuration below 60 FPS is 3840x2160 (4K) with Ultra settings, which produces an average of 55 FPS.

Q: What is the percentage drop in frame rate from 1080p to 1440p at High settings?

A: At High settings, the frame rate drops from 197.8 FPS at 1080p to 129.4 FPS at 1440p, which is a reduction of approximately 35%.

Q: Is the CPU or GPU more likely to be the limiting factor at 1080p Low settings?

A: At 1080p Low, the system reaches 320.9 FPS, which is extremely high. Given that the CPU’s single-thread score is strong (Passmark single-thread of 3910), the CPU is likely the primary limiter at this resolution, as the GPU is not heavily taxed with such a low quality preset.

Q: What is the combo’s rank among all tested configurations in Fivem?

A: This combo ranks 141st out of 1792 tested combinations, placing it in the top 8% of all configurations tested in the game.