Fivem

Resolution Scaling

The measured FPS data for Fivem with the AMD Ryzen 5 5600GT and AMD Radeon RX 9070 shows a clear pattern of resolution-dependent scaling. At 1080p with Low settings, the combo produces 248.4 FPS, which drops to 163.9 FPS at 1440p and further to 89.9 FPS at 4K. This represents a 34% reduction when moving from 1080p to 1440p, and a 64% reduction from 1080p to 4K. The scaling is not linear, indicating that the GPU becomes increasingly stressed as pixel count rises.

At Medium settings, the same resolution progression yields 195.7 FPS, 128.9 FPS, and 71.1 FPS respectively. The drop from 1080p to 1440p is 34.1%, while the drop from 1440p to 4K is 44.8%. This suggests that the GPU workload grows more rapidly at higher resolutions, which is typical for a graphically demanding multiplayer title.

High settings show 154.6 FPS at 1080p, 100.3 FPS at 1440p, and 57.8 FPS at 4K. The percentage drops are 35.1% and 42.4% respectively. Ultra settings, the most demanding preset, produces 121 FPS at 1080p, 77.5 FPS at 1440p, and 40.3 FPS at 4K. The Ultra preset's 4K result drops below 60 FPS, indicating that this combination struggles to maintain smooth gameplay at maximum quality in 4K.

The data reveals that the CPU is not the primary limiting factor at lower resolutions. At 1080p Low, the system achieves 248.4 FPS, which is well above typical display refresh rates. The Ryzen 5 5600GT's 6 cores and 12 threads, with a boost clock of 4.60 GHz, provide sufficient processing power to feed the GPU at these frame rates. However, the CPU's Zen 3 architecture and DDR4 memory support may begin to constrain performance at very high frame rates, though the measured results do not indicate a hard bottleneck.

At 4K, the GPU becomes the dominant constraint. The RX 9070's 16 GB of GDDR6 memory and 644.6 GB/s bandwidth are substantial, but the sheer pixel count of 3840x2160 demands significant fill rate. The 128 ROPs and 322.6 GPixel/s pixel rate determine how quickly the GPU can output frames, and the data shows that Ultra settings at 4K yields only 40.3 FPS. This is a 67.5% reduction from the 1080p Ultra result of 121 FPS, demonstrating that the GPU's rasterization throughput is the key limiter at high resolutions.

GPU Role

The AMD Radeon RX 9070, built on the RDNA 4.0 architecture with a 4 nm process, has a base clock of 1330 MHz and a boost clock of 2520 MHz. The game clock is rated at 2070 MHz, which represents the expected sustained clock under typical gaming loads. The memory operates at 2518 MHz with 20.1 Gbps effective data rate, feeding the 256-bit bus for a total bandwidth of 644.6 GB/s. This memory subsystem is critical for Fivem, which loads many assets in a multiplayer environment.

The GPU's 16 GB of GDDR6 memory is ample for this game, as Fivem does not typically exceed this capacity even at 4K Ultra settings. The benchmark data does not show any signs of memory capacity throttling, as the frame rate drops are consistent with computational load rather than memory swapping. The 3584 shading units and 224 TMUs provide the compute and texture filtering capability needed for the game's various environments and player models.

The RX 9070's ray tracing cores, numbering 56, are present but Fivem does not heavily utilize ray tracing features in its default rendering path. The DirectX 12 Ultimate support (12_2) ensures compatibility with modern rendering techniques, while Vulkan 1.4 support offers an alternative API path. The GPU's FP32 performance of 36.13 TFLOPS is substantial, though Fivem's performance is more dependent on driver optimization and CPU-GPU coordination.

Comparing to its nearest rivals, the RX 9070's average benchmark score of 34780 places it within 0.2% of the NVIDIA A2 (34866) and 0.3% ahead of the NVIDIA Quadro GV100 (34677). The AMD Radeon HD 7970 scores 34541 (0.7% behind), and the AMD Radeon PRO W6400 scores 34511 (0.8% behind). These deltas are minimal, suggesting the RX 9070 performs at parity with these professional and data center cards in synthetic benchmarks, though its gaming-oriented architecture likely provides better real-world performance in Fivem.

FAQ

Q: What is the highest average FPS achievable with this CPU-GPU combination?

A: The highest measured average FPS is 248.4 at 1920x1080 with Low settings. This represents the peak performance ceiling for this combo in Fivem.

Q: Can this system maintain 60 FPS at 4K?

A: At 4K, the system achieves 57.8 FPS on High settings and 71.1 FPS on Medium, but drops to 40.3 FPS on Ultra. Only the Medium preset stays above 60 FPS at 4K, while High falls just short.

Q: How does the CPU compare to its nearest rival in synthetic benchmarks?

A: The Ryzen 5 5600GT has an average benchmark score of 20740, which is essentially identical to the Intel Core i7-10700 (20746, 0% delta). It is 0.3% ahead of the AMD Ryzen 5 5600X (20680) and 0.5% behind the AMD EPYC 7J13 (20845).

Q: What is the GPU's memory bandwidth and how does it affect performance?

A: The RX 9070 has a memory bandwidth of 644.6 GB/s across a 256-bit bus with 16 GB of GDDR6 memory. This high bandwidth supports the texture streaming demands of Fivem, particularly in busy multiplayer areas.

Q: Is the 1080p Ultra setting playable?

A: Yes, 1080p Ultra produces 121 FPS, which is smooth for most displays. This is notably higher than the 4K Ultra result of 40.3 FPS, showing the resolution impact on Ultra quality.

Q: What is the combo's overall ranking among tested configurations?

A: This combo ranks 570 out of 1792 tested combinations in Fivem, placing it in the upper third of all tested system pairings.

Settings Recommendations

The measured data provides clear guidance for optimal settings. At 1920x1080, all presets are playable, with Low achieving 248.4 FPS, Medium 195.7 FPS, High 154.6 FPS, and Ultra 121 FPS. For competitive multiplayer where high frame rates matter, Medium offers a strong balance at 195.7 FPS — this is 21% below Low but likely provides significantly better visual quality. High at 154.6 FPS is still excellent for fast-paced gameplay and adds further visual fidelity.

At 2560x1440, the recommendation shifts. Low produces 163.9 FPS, Medium 128.9 FPS, High 100.3 FPS, and Ultra 77.5 FPS. Medium at 128.9 FPS is the sweet spot for 1440p gaming, as it remains above 120 FPS while offering better visuals than Low. High at 100.3 FPS is also viable for players with 100 Hz monitors, and Ultra at 77.5 FPS is acceptable for 75 Hz displays.

At 3840x2160, the options are more constrained. Low achieves 89.9 FPS, Medium 71.1 FPS, High 57.8 FPS, and Ultra 40.3 FPS. Medium at 71.1 FPS is the recommended preset for 4K, as it provides the best combination of smoothness and visual quality. High at 57.8 FPS is borderline for 60 Hz displays and may cause noticeable stuttering in fast-paced scenes. Ultra at 40.3 FPS is not recommended for active gameplay, though it could suffice for screenshots or less demanding scenarios.

The data indicates that the CPU-GPU balance favors high frame rates at 1080p and 1440p, while 4K requires compromise. Players prioritizing competitive performance should select Low or Medium at 1440p, while those favoring visual immersion can use High at 1440p or Medium at 4K. The Ryzen 5 5600GT's single-thread performance of 913 in 3dmark_single_thread suggests it can handle the game logic at high frame rates, while the RX 9070's 36.13 TFLOPS FP32 compute provides ample headroom for graphical effects.

How This Combo Ranks

The AMD Ryzen 5 5600GT and AMD Radeon RX 9070 combination ranks 570 out of 1792 tested combos in Fivem. This places it in the 68th percentile of all tested configurations, meaning it outperforms roughly two-thirds of the systems in the database. The ranking reflects the balance between the CPU's 78th percentile performance among all CPUs and the GPU's 79th percentile among all GPUs.

The Ryzen 5 5600GT's average benchmark score of 20740 places it alongside processors like the Intel Core i7-10700 (20746, 0% delta) and the Intel Core i5-12490F (20794, -0.3% delta). It slightly outperforms the AMD Ryzen 5 5600X (20680, 0.3% delta) and trails the AMD EPYC 7J13 (20845, -0.5% delta) by a negligible margin. This CPU tier is well-suited for mid-range gaming, offering 6 cores and 12 threads with Zen 3 architecture.

The RX 9070's ranking is similarly competitive, with its 34780 average benchmark score nearly matching the NVIDIA A2 (34866, -0.2% delta) and the NVIDIA Quadro GV100 (34677, 0.3% delta). The GPU's 79th percentile standing among all GPUs indicates solid performance relative to the broader market. In Fivem specifically, the combo's rank of 570 suggests that the pairing works well together, with neither component severely bottlenecking the other.

The combination's performance in Fivem can be contextualized by its synthetic scores: the CPU achieves 17272 in cinebench_r23_multicore and 2438 in cinebench_r23_singlecore, while the GPU reaches 25381 in passmark_g3d and 14737 in passmark_gpu_compute. These balanced scores translate to the measured FPS results, where the system excels at 1080p and 1440p but requires settings compromises at 4K.

Measured FPS Breakdown

At 1920x1080, the data shows a clear progression across settings:

• Low: 248.4 FPS
• Medium: 195.7 FPS
• High: 154.6 FPS
• Ultra: 121 FPS

The step from Low to Medium costs 52.7 FPS (21.2% reduction), Medium to High costs 41.1 FPS (21.0% reduction), and High to Ultra costs 33.6 FPS (21.7% reduction). The consistent percentage drops indicate that each settings tier adds roughly equal graphical load, with the GPU handling the increased demand without hitting a hard ceiling.

At 2560x1440:

• Low: 163.9 FPS
• Medium: 128.9 FPS
• High: 100.3 FPS
• Ultra: 77.5 FPS

The deltas here are 35 FPS (21.4%), 28.6 FPS (22.2%), and 22.8 FPS (22.7%) respectively. The slightly larger percentage drops at higher settings suggest that the GPU is working closer to its limits at 1440p, though it still maintains strong performance.

At 3840x2160:

• Low: 89.9 FPS
• Medium: 71.1 FPS
• High: 57.8 FPS
• Ultra: 40.3 FPS

The reductions are 18.8 FPS (20.9%), 13.3 FPS (18.7%), and 17.5 FPS (30.3%). The Ultra preset shows a notably larger drop from High, indicating that the 4K Ultra combination pushes the GPU into territory where pixel fill rate and memory bandwidth become binding constraints. The 40.3 FPS result at 4K Ultra is the only measured configuration that falls into the sub-60 FPS range, and it represents a 83.8% reduction from the best-case 1080p Low result.

The resolution scaling from 1080p to 1440p averages around 34% FPS reduction across settings, while the scaling from 1440p to 4K averages around 44% reduction. This asymmetry confirms that the GPU's workload increases superlinearly with pixel count, which is expected given the fixed ROP count of 128 and the growing fill rate demands at higher resolutions. The 644.6 GB/s memory bandwidth is sufficient for most configurations, but the 4K Ultra data suggests it may contribute to the steep performance cliff observed there.